target/linux/ath79/dts/ar9344_ocedo_raccoon.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         model = "OCEDO Raccoon";
  11         compatible = "ocedo,raccoon", "qca,ar9344";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 power {
  28                         label = "raccoon:green:power";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wlan2g {
  34                         label = "raccoon:yellow:wlan24";
  35                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy0tpt";
  37                 };
  38
  39                 system: system {
  40                         label = "raccoon:blue:sys";
  41                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  42                 };
  43         };
  44
  45         ath9k-leds {
  46                 compatible = "gpio-leds";
  47
  48                 wlan5g {
  49                         label = "raccoon:red:wlan5";
  50                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  51                         linux,default-trigger = "phy1tpt";
  52                 };
  53         };
  54
  55         keys {
  56                 compatible = "gpio-keys-polled";
  57                 poll-interval = <20>;
  58
  59                 reset {
  60                         linux,code = <KEY_RESTART>;
  61                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  62                         debounce-interval = <60>;
  63                 };
  64         };
  65 };
  66
  67 &ref {
  68         clock-frequency = <40000000>;
  69 };
  70
  71 &uart {
  72         status = "okay";
  73 };
  74
  75 &gpio {
  76         status = "okay";
  77 };
  78
  79 &spi {
  80         num-cs = <1>;
  81
  82         status = "okay";
  83
  84         flash@0 {
  85                 compatible = "jedec,spi-nor";
  86                 reg = <0>;
  87                 spi-max-frequency = <25000000>;
  88
  89                 partitions {
  90                         compatible = "fixed-partitions";
  91                         #address-cells = <1>;
  92                         #size-cells = <1>;
  93
  94                         uboot: partition@0 {
  95                                 label = "u-boot";
  96                                 reg = <0x000000 0x040000>;
  97                                 read-only;
  98                         };
  99
 100                         partition@40000 {
 101                                 label = "u-boot-env";
 102                                 reg = <0x040000 0x010000>;
 103                         };
 104
 105                         partition@50000 {
 106                                 compatible = "denx,uimage";
 107                                 label = "firmware";
 108                                 reg = <0x050000 0x740000>;
 109                         };
 110
 111                         partition@790000 {
 112                                 label = "vendor";
 113                                 reg = <0x790000 0x740000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@ed0000 {
 118                                 label = "data";
 119                                 reg = <0xed0000 0x110000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@fe0000 {
 124                                 label = "id";
 125                                 reg = <0xfe0000 0x010000>;
 126                                 read-only;
 127                         };
 128
 129                         art: partition@ff0000 {
 130                                 label = "art";
 131                                 reg = <0xff0000 0x010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &pcie {
 139         status = "okay";
 140
 141         ath9k: wifi@0,0 {
 142                 compatible = "pci168c,0030";
 143                 reg = <0x0000 0 0 0 0>;
 144                 mtd-mac-address = <&art 0xc>;
 145                 qca,no-eeprom;
 146                 #gpio-cells = <2>;
 147                 gpio-controller;
 148         };
 149 };
 150
 151 &wmac {
 152         status = "okay";
 153
 154         mtd-cal-data = <&art 0x1000>;
 155         mtd-mac-address = <&art 0x6>;
 156 };
 157
 158 &mdio0 {
 159         status = "okay";
 160
 161         phy-mask = <0>;
 162
 163         phy0: ethernet-phy@0 {
 164                 reg = <0>;
 165                 phy-mode = "rgmii";
 166         };
 167 };
 168
 169 &eth0 {
 170         status = "okay";
 171
 172         pll-data = <0x06000000 0x00000101 0x00001313>;
 173
 174         mtd-mac-address = <&art 0x0>;
 175
 176         phy-mode = "rgmii";
 177         phy-handle = <&phy0>;
 178 };