target/linux/ath79/dts/ar9344_netgear_wndr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar9344.dtsi"
   7
   8 / {
   9         chosen {
  10                 bootargs = "console=ttyS0,115200n8";
  11         };
  12
  13         aliases {
  14                 led-boot = &led_power_amber;
  15                 led-failsafe = &led_power_amber;
  16                 led-running = &led_power_green;
  17                 led-upgrade = &led_power_amber;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 wps {
  25                         label = "wps";
  26                         linux,code = <KEY_WPS_BUTTON>;
  27                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 rfkill {
  37                         label = "rfkill";
  38                         linux,code = <KEY_RFKILL>;
  39                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 pinctrl-names = "default";
  47                 pinctrl-0 = <&enable_gpio_11>;
  48
  49                 led_power_green: power_green {
  50                         label = "netgear:green:power";
  51                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 led_power_amber: power_amber {
  55                         label = "netgear:amber:power";
  56                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  57                         default-state = "keep";
  58                 };
  59
  60                 wan_green {
  61                         label = "netgear:green:wan";
  62                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 wan_amber {
  66                         label = "netgear:amber:wan";
  67                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 wlan2g_green {
  71                         label = "netgear:green:wlan2g";
  72                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75
  76                 wlan5g_blue {
  77                         label = "netgear:blue:wlan5g";
  78                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy1tpt";
  80                 };
  81
  82                 wps_green {
  83                         label = "netgear:green:wps";
  84                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  85                 };
  86
  87                 wps_amber {
  88                         label = "netgear:amber:wps";
  89                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 usb_green {
  93                         label = "netgear:green:usb";
  94                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  95                         trigger-sources = <&hub_port>;
  96                         linux,default-trigger = "usbport";
  97                 };
  98         };
  99
 100         ubi-concat {
 101                 compatible = "mtd-concat";
 102                 devices = <&ubipart0 &ubipart1>;
 103
 104                 partitions {
 105                         compatible = "fixed-partitions";
 106                         #address-cells = <1>;
 107                         #size-cells = <1>;
 108
 109                         ubi@ac0000 {
 110                                 label = "ubi";
 111                                 reg = <0x0 0x7500000>;
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &pinmux {
 118         enable_gpio_11: pinmux_enable_gpio_11 {
 119                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
 120         };
 121 };
 122
 123 &nand {
 124         status = "okay";
 125
 126         partitions {
 127                 compatible = "fixed-partitions";
 128                 #address-cells = <1>;
 129                 #size-cells = <1>;
 130
 131                 partition@0 {
 132                         label = "u-boot";
 133                         reg = <0x0 0x40000>;
 134                         read-only;
 135                 };
 136
 137                 partition@40000 {
 138                         label = "u-boot-env";
 139                         reg = <0x40000 0x40000>;
 140                 };
 141
 142                 caldata: partition@80000 {
 143                         label = "caldata";
 144                         reg = <0x80000 0x40000>;
 145                         read-only;
 146                 };
 147
 148                 partition@c0000 {
 149                         label = "pot";
 150                         reg = <0xc0000 0x80000>;
 151                 };
 152
 153                 partition@140000 {
 154                         label = "language";
 155                         reg = <0x140000 0x200000>;
 156                 };
 157
 158                 partition@340000 {
 159                         label = "config";
 160                         reg = <0x340000 0x80000>;
 161                 };
 162
 163                 partition@3c0000 {
 164                         label = "traffic_meter";
 165                         reg = <0x3c0000 0x300000>;
 166                 };
 167
 168                 kernel@6c0000 {
 169                         label = "kernel";
 170                         reg = <0x6c0000 0x400000>;
 171                 };
 172
 173                 ubipart0: partition@ac0000 {
 174                         label = "ubipart0";
 175                         reg = <0xac0000 0x1500000>;
 176                 };
 177
 178                 partition@6c0000 {
 179                         label = "firmware";
 180                         reg = <0x6c0000 0x1900000>;
 181                         compatible = "netgear,uimage";
 182                 };
 183
 184                 partition@1fc0000 {
 185                         label = "caldata_backup";
 186                         reg = <0x1fc0000 0x40000>;
 187                         read-only;
 188                 };
 189
 190                 ubipart1: partition@2000000 {
 191                         label = "ubipart1";
 192                         reg = <0x2000000 0x6000000>;
 193                 };
 194         };
 195 };
 196
 197 &ref {
 198         clock-frequency = <40000000>;
 199 };
 200
 201 &builtin_switch {
 202         resets = <&rst 8>, <&rst 12>;
 203         reset-names = "switch", "switch-analog";
 204 };
 205
 206 &mdio0 {
 207         status = "okay";
 208
 209         phy-mask = <0>;
 210
 211         phy0: ethernet-phy@0 {
 212                 reg = <0>;
 213                 phy-mode = "rgmii";
 214                 qca,mib-poll-interval = <500>;
 215
 216                 qca,ar8327-initvals = <
 217                         0x04 0x07600000
 218                         0x0c 0x01000000
 219                         0x10 0xc1000000
 220                         0x50 0xcc35cc35
 221                         0x54 0xcb37cb37
 222                         0x58 0x00000000
 223                         0x5c 0x00f3cf00
 224                         0x7c 0x0000007e
 225                         0x94 0x0000007e
 226                         >;
 227         };
 228 };
 229
 230 &eth0 {
 231         status = "okay";
 232
 233         /* default for ar934x, except for 1000M */
 234         pll-data = <0x06000000 0x00000101 0x00001616>;
 235
 236         mtd-mac-address = <&caldata 0x0>;
 237
 238         phy-mode = "rgmii";
 239         phy-handle = <&phy0>;
 240 };
 241
 242 &gpio {
 243         status = "okay";
 244
 245         lna0 {
 246                 gpio-hog;
 247                 line-name = "netgear:ext:lna0";
 248                 gpios = <18 GPIO_ACTIVE_HIGH>;
 249                 output-high;
 250         };
 251
 252         lna1 {
 253                 gpio-hog;
 254                 line-name = "netgear:ext:lna1";
 255                 gpios = <19 GPIO_ACTIVE_HIGH>;
 256                 output-high;
 257         };
 258 };
 259
 260 &wmac {
 261         status = "okay";
 262
 263         mtd-mac-address = <&caldata 0x0>;
 264         qca,no-eeprom;
 265 };
 266
 267 &pcie {
 268         status = "okay";
 269
 270         ath9k: wifi@0,0 {
 271                 compatible = "pci168c,0033";
 272                 reg = <0x0000 0 0 0 0>;
 273                 mtd-mac-address = <&caldata 0xc>;
 274                 qca,no-eeprom;
 275                 #gpio-cells = <2>;
 276                 gpio-controller;
 277
 278                 usb_power {
 279                         gpio-hog;
 280                         line-name = "netgear:power:usb";
 281                         gpios = <0 GPIO_ACTIVE_HIGH>;
 282                         output-high;
 283                 };
 284         };
 285 };
 286
 287 &usb_phy {
 288         status = "okay";
 289 };
 290
 291 &usb {
 292         status = "okay";
 293         #address-cells = <1>;
 294         #size-cells = <0>;
 295
 296         hub_port: port@1 {
 297                 reg = <1>;
 298                 #trigger-source-cells = <0>;
 299         };
 300 };
 301
 302 &uart {
 303         status = "okay";
 304 };