target/linux/ath79/dts/ar9344_netgear_wndr.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200n8";
  12         };
  13
  14         aliases {
  15                 led-boot = &led_power_amber;
  16                 led-failsafe = &led_power_amber;
  17                 led-running = &led_power_green;
  18                 led-upgrade = &led_power_amber;
  19                 label-mac-device = &eth0;
  20         };
  21
  22         keys {
  23                 compatible = "gpio-keys";
  24
  25                 wps {
  26                         label = "wps";
  27                         linux,code = <KEY_WPS_BUTTON>;
  28                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  29                 };
  30
  31                 reset {
  32                         label = "reset";
  33                         linux,code = <KEY_RESTART>;
  34                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 rfkill {
  38                         label = "rfkill";
  39                         linux,code = <KEY_RFKILL>;
  40                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  41                 };
  42         };
  43
  44         leds {
  45                 compatible = "gpio-leds";
  46
  47                 pinctrl-names = "default";
  48                 pinctrl-0 = <&enable_gpio_11>;
  49
  50                 led_power_green: power_green {
  51                         label = "netgear:green:power";
  52                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 led_power_amber: power_amber {
  56                         label = "netgear:amber:power";
  57                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  58                         default-state = "keep";
  59                 };
  60
  61                 wan_green {
  62                         label = "netgear:green:wan";
  63                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  64                 };
  65
  66                 wan_amber {
  67                         label = "netgear:amber:wan";
  68                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  69                 };
  70
  71                 wlan2g_green {
  72                         label = "netgear:green:wlan2g";
  73                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  74                         linux,default-trigger = "phy0tpt";
  75                 };
  76
  77                 wlan5g_blue {
  78                         label = "netgear:blue:wlan5g";
  79                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  80                         linux,default-trigger = "phy1tpt";
  81                 };
  82
  83                 wps_green {
  84                         label = "netgear:green:wps";
  85                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  86                 };
  87
  88                 wps_amber {
  89                         label = "netgear:amber:wps";
  90                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  91                 };
  92
  93                 usb_green {
  94                         label = "netgear:green:usb";
  95                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  96                         trigger-sources = <&hub_port>;
  97                         linux,default-trigger = "usbport";
  98                 };
  99         };
 100 };
 101
 102 &pinmux {
 103         enable_gpio_11: pinmux_enable_gpio_11 {
 104                 pinctrl-single,bits = <0x8 0x0 0xff000000>;
 105         };
 106 };
 107
 108 &nand {
 109         status = "okay";
 110
 111         partitions {
 112                 compatible = "fixed-partitions";
 113                 #address-cells = <1>;
 114                 #size-cells = <1>;
 115
 116                 partition@0 {
 117                         label = "u-boot";
 118                         reg = <0x0 0x40000>;
 119                         read-only;
 120                 };
 121
 122                 partition@40000 {
 123                         label = "u-boot-env";
 124                         reg = <0x40000 0x40000>;
 125                 };
 126
 127                 art: partition@80000 {
 128                         label = "caldata";
 129                         reg = <0x80000 0x40000>;
 130                         read-only;
 131                 };
 132
 133                 partition@c0000 {
 134                         label = "pot";
 135                         reg = <0xc0000 0x80000>;
 136                 };
 137
 138                 partition@140000 {
 139                         label = "language";
 140                         reg = <0x140000 0x200000>;
 141                 };
 142
 143                 partition@340000 {
 144                         label = "config";
 145                         reg = <0x340000 0x80000>;
 146                 };
 147
 148                 partition@3c0000 {
 149                         label = "traffic_meter";
 150                         reg = <0x3c0000 0x300000>;
 151                 };
 152
 153                 kernel@6c0000 {
 154                         label = "kernel";
 155                         reg = <0x6c0000 0x200000>;
 156                 };
 157
 158                 ubi@8c0000 {
 159                         label = "ubi";
 160                         reg = <0x8c0000 0x1700000>;
 161                 };
 162
 163                 partition@6c0000 {
 164                         label = "firmware";
 165                         reg = <0x6c0000 0x1900000>;
 166                         compatible = "netgear,uimage";
 167                 };
 168
 169                 partition@1fc0000 {
 170                         label = "caldata_backup";
 171                         reg = <0x1fc0000 0x40000>;
 172                         read-only;
 173                 };
 174
 175                 partition@2000000 {
 176                         label = "reserved";
 177                         reg = <0x2000000 0x6000000>;
 178                         read-only;
 179                 };
 180         };
 181 };
 182
 183 &ref {
 184         clock-frequency = <40000000>;
 185 };
 186
 187 &builtin_switch {
 188         resets = <&rst 8>, <&rst 12>;
 189         reset-names = "switch", "switch-analog";
 190 };
 191
 192 &mdio0 {
 193         status = "okay";
 194
 195         phy-mask = <0>;
 196
 197         phy0: ethernet-phy@0 {
 198                 reg = <0>;
 199                 phy-mode = "rgmii";
 200                 qca,mib-poll-interval = <500>;
 201
 202                 qca,ar8327-initvals = <
 203                         0x04 0x07600000
 204                         0x0c 0x01000000
 205                         0x10 0xc1000000
 206                         0x50 0xcc35cc35
 207                         0x54 0xcb37cb37
 208                         0x58 0x00000000
 209                         0x5c 0x00f3cf00
 210                         0x7c 0x0000007e
 211                         0x94 0x0000007e
 212                         >;
 213         };
 214 };
 215
 216 &eth0 {
 217         status = "okay";
 218
 219         /* default for ar934x, except for 1000M */
 220         pll-data = <0x06000000 0x00000101 0x00001616>;
 221
 222         mtd-mac-address = <&art 0x0>;
 223
 224         phy-mode = "rgmii";
 225         phy-handle = <&phy0>;
 226 };
 227
 228 &gpio {
 229         status = "okay";
 230
 231         lna0 {
 232                 gpio-hog;
 233                 line-name = "netgear:ext:lna0";
 234                 gpios = <18 GPIO_ACTIVE_HIGH>;
 235                 output-high;
 236         };
 237
 238         lna1 {
 239                 gpio-hog;
 240                 line-name = "netgear:ext:lna1";
 241                 gpios = <19 GPIO_ACTIVE_HIGH>;
 242                 output-high;
 243         };
 244 };
 245
 246 &wmac {
 247         status = "okay";
 248
 249         mtd-mac-address = <&art 0x0>;
 250         qca,no-eeprom;
 251 };
 252
 253 &pcie {
 254         status = "okay";
 255
 256         ath9k: wifi@0,0 {
 257                 compatible = "pci168c,0033";
 258                 reg = <0x0000 0 0 0 0>;
 259                 mtd-mac-address = <&art 0xc>;
 260                 qca,no-eeprom;
 261                 #gpio-cells = <2>;
 262                 gpio-controller;
 263
 264                 usb_power {
 265                         gpio-hog;
 266                         line-name = "netgear:power:usb";
 267                         gpios = <0 GPIO_ACTIVE_HIGH>;
 268                         output-high;
 269                 };
 270         };
 271 };
 272
 273 &usb_phy {
 274         status = "okay";
 275 };
 276
 277 &usb {
 278         status = "okay";
 279         #address-cells = <1>;
 280         #size-cells = <0>;
 281
 282         hub_port: port@1 {
 283                 reg = <1>;
 284                 #trigger-source-cells = <0>;
 285         };
 286 };
 287
 288 &uart {
 289         status = "okay";
 290 };