target/linux/ath79/dts/ar9344_dlink_dir-8x5.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9344.dtsi"
   8
   9 / {
  10         chosen {
  11                 bootargs = "console=ttyS0,115200";
  12         };
  13
  14         keys {
  15                 compatible = "gpio-keys";
  16
  17                 reset {
  18                         linux,code = <KEY_RESTART>;
  19                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  20                         debounce-interval = <60>;
  21                 };
  22
  23                 wps {
  24                         linux,code = <KEY_WPS_BUTTON>;
  25                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  26                         debounce-interval = <60>;
  27                 };
  28         };
  29 };
  30
  31 &eth0 {
  32         status = "okay";
  33
  34         /* default for ar934x, except for 1000M */
  35         pll-data = <0x06000000 0x00000101 0x00001616>;
  36
  37         phy-mode = "rgmii";
  38         phy-handle = <&phy0>;
  39 };
  40
  41 &mdio0 {
  42         status = "okay";
  43
  44         phy-mask = <0>;
  45
  46         phy0: ethernet-phy@0 {
  47                 reg = <0>;
  48                 qca,ar8327-initvals = <
  49                         /* GPL code drop (bsp.h & athrs17_phy.c) */
  50                         0x10 0xc1000000 /* PWS_REG_VALUE */
  51                         0x04 0x07600000 /* PORT0 PAD Mode */
  52                         0x0c 0x01000000 /* PORT6 PAD Mode */
  53                         0x7c 0x0000007e /* PORT0_STATUS */
  54                         0x94 0x0000007e /* PORT6_STATUS */
  55                 >;
  56         };
  57 };
  58
  59 &pcie {
  60         status = "okay";
  61
  62         ath9k: wifi@0,0 {
  63                 compatible = "pci168c,0030";
  64                 reg = <0x0000 0 0 0 0>;
  65                 qca,no-eeprom;
  66                 gpio-controller;
  67                 #gpio-cells = <2>;
  68         };
  69 };
  70
  71 &ref {
  72         clock-frequency = <40000000>;
  73 };
  74
  75 &spi {
  76         status = "okay";
  77         num-cs = <1>;
  78
  79         flash@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         partition@0 {
  90                                 label = "uboot";
  91                                 reg = <0x000000 0x010000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@10000 {
  96                                 label = "nvram";
  97                                 reg = <0x010000 0x010000>;
  98                                 read-only;
  99                         };
 100
 101                         partition@20000 {
 102                                 label = "firmware";
 103                                 reg = <0x020000 0xF90000>;
 104                                 compatible = "denx,uimage";
 105                         };
 106
 107                         partition@fb0000 {
 108                                 label = "lang";
 109                                 reg = <0xfb0000 0x030000>;
 110                                 read-only;
 111                         };
 112
 113                         partition@fe0000 {
 114                                 label = "mac";
 115                                 reg = <0xfe0000 0x010000>;
 116                                 read-only;
 117                         };
 118
 119                         partition@ff0000 {
 120                                 label = "art";
 121                                 reg = <0xff0000 0x010000>;
 122                                 read-only;
 123                         };
 124                 };
 125         };
 126 };
 127
 128 &uart {
 129         status = "okay";
 130 };
 131
 132 &usb {
 133         status = "okay";
 134         #address-cells = <1>;
 135         #size-cells = <0>;
 136
 137         hub_port1: port@1 {
 138                 reg = <1>;
 139                 #trigger-source-cells = <0>;
 140         };
 141 };
 142
 143 &usb_phy {
 144         status = "okay";
 145 };
 146
 147 &wmac {
 148         status = "okay";
 149         qca,no-eeprom;
 150 };
 151