target/linux/ath79/dts/ar9341_tplink_tl-wr841-v8.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "TP-Link TL-WR841N/ND v8";
  11         compatible = "tplink,tl-wr841-v8", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 rfkill {
  36                         label = "WiFi";
  37                         linux,code = <KEY_RFKILL>;
  38                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 system: power {
  47                         label = "tp-link:green:power";
  48                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan {
  53                         label = "tp-link:green:wlan";
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 qss {
  59                         label = "tp-link:green:qss";
  60                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 wan {
  64                         label = "tp-link:green:wan";
  65                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 lan1 {
  69                         label = "tp-link:green:lan1";
  70                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 lan2 {
  74                         label = "tp-link:green:lan2";
  75                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 lan3 {
  79                         label = "tp-link:green:lan3";
  80                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  81                 };
  82
  83                 lan4 {
  84                         label = "tp-link:green:lan4";
  85                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  86                 };
  87         };
  88 };
  89
  90 &ref {
  91         clock-frequency = <25000000>;
  92 };
  93
  94 &uart {
  95         status = "okay";
  96 };
  97
  98 &gpio {
  99         status = "okay";
 100 };
 101
 102 &spi {
 103         num-cs = <1>;
 104
 105         status = "okay";
 106
 107         flash@0 {
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         uboot: partition@0 {
 118                                 label = "u-boot";
 119                                 reg = <0x000000 0x020000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 compatible = "tplink,firmware";
 125                                 label = "firmware";
 126                                 reg = <0x020000 0x3d0000>;
 127                         };
 128
 129                         art: partition@3f0000 {
 130                                 label = "art";
 131                                 reg = <0x3f0000 0x010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &eth0 {
 139         status = "okay";
 140
 141         phy-handle = <&swphy0>;
 142         mtd-mac-address = <&uboot 0x1fc00>;
 143         mtd-mac-address-increment = <(-1)>;
 144 };
 145
 146 &eth1 {
 147         status = "okay";
 148
 149         mtd-mac-address = <&uboot 0x1fc00>;
 150
 151         pll-data = <0x06000000 0x00000101 0x00001616>;
 152
 153         gmac-config {
 154                 device = <&gmac>;
 155                 switch-phy-swap = <1>;
 156         };
 157 };
 158
 159 &wmac {
 160         status = "okay";
 161
 162         mtd-cal-data = <&art 0x1000>;
 163         mtd-mac-address = <&uboot 0x1fc00>;
 164 };