target/linux/ath79/dts/ar9341_tplink_tl-wa.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar9341.dtsi"
   7
   8 / {
   9         aliases {
  10                 serial0 = &uart;
  11                 label-mac-device = &wmac;
  12         };
  13 };
  14
  15 &ref {
  16         clock-frequency = <25000000>;
  17 };
  18
  19 &spi {
  20         status = "okay";
  21
  22         num-cs = <1>;
  23
  24         flash@0 {
  25                 compatible = "jedec,spi-nor";
  26                 reg = <0>;
  27                 spi-max-frequency = <25000000>;
  28
  29                 partitions {
  30                         compatible = "fixed-partitions";
  31                         #address-cells = <1>;
  32                         #size-cells = <1>;
  33
  34                         uboot: partition@0 {
  35                                 label = "u-boot";
  36                                 reg = <0x000000 0x020000>;
  37                                 read-only;
  38                         };
  39
  40                         partition@20000 {
  41                                 compatible = "tplink,firmware";
  42                                 label = "firmware";
  43                                 reg = <0x020000 0x3d0000>;
  44                         };
  45
  46                         art: partition@3f0000 {
  47                                 label = "art";
  48                                 reg = <0x3f0000 0x010000>;
  49                                 read-only;
  50                         };
  51                 };
  52         };
  53 };
  54
  55 &uart {
  56         status = "okay";
  57 };
  58
  59 &eth0 {
  60         status = "okay";
  61
  62         phy-handle = <&swphy0>;
  63
  64         mtd-mac-address = <&uboot 0x1fc00>;
  65
  66         gmac-config {
  67                 device = <&gmac>;
  68
  69                 switch-phy-swap = <1>;
  70         };
  71 };
  72
  73 &eth1 {
  74         compatible = "syscon", "simple-mfd";
  75 };
  76
  77 &wmac {
  78         status = "okay";
  79
  80         mtd-cal-data = <&art 0x1000>;
  81         mtd-mac-address = <&uboot 0x1fc00>;
  82 };