target/linux/ath79/dts/ar9341_tplink.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar9341.dtsi"
   7
   8 / {
   9         aliases {
  10                 serial0 = &uart;
  11                 led-boot = &led_power;
  12                 led-failsafe = &led_power;
  13                 led-running = &led_power;
  14                 led-upgrade = &led_power;
  15                 label-mac-device = &wmac;
  16         };
  17
  18         keys: keys {
  19                 compatible = "gpio-keys";
  20
  21                 rfkill {
  22                         label = "WiFi";
  23                         linux,code = <KEY_RFKILL>;
  24                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  25                         debounce-interval = <60>;
  26                 };
  27         };
  28
  29         leds: leds {
  30                 compatible = "gpio-leds";
  31
  32                 led_power: power {
  33                         label = "tp-link:green:power";
  34                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  35                         default-state = "on";
  36                 };
  37
  38                 wlan {
  39                         label = "tp-link:green:wlan";
  40                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  41                         linux,default-trigger = "phy0tpt";
  42                 };
  43
  44                 qss {
  45                         label = "tp-link:green:qss";
  46                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  47                 };
  48
  49                 wan {
  50                         label = "tp-link:green:wan";
  51                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  52                 };
  53
  54                 lan1 {
  55                         label = "tp-link:green:lan1";
  56                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  57                 };
  58
  59                 lan2 {
  60                         label = "tp-link:green:lan2";
  61                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  62                 };
  63
  64                 lan3 {
  65                         label = "tp-link:green:lan3";
  66                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 lan4 {
  70                         label = "tp-link:green:lan4";
  71                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74 };
  75
  76 &ref {
  77         clock-frequency = <25000000>;
  78 };
  79
  80 &uart {
  81         status = "okay";
  82 };
  83
  84 &gpio {
  85         pinctrl-names = "default";
  86         pinctrl-0 = <&jtag_disable_pins &pmx_usb_power>;
  87 };
  88
  89 &pinmux {
  90         pmx_usb_power: usb_power {
  91                 pinctrl-single,bits = <0x4 0x0 0xff>;
  92         };
  93 };
  94
  95 &eth0 {
  96         status = "okay";
  97
  98         phy-handle = <&swphy0>;
  99
 100         mtd-mac-address = <&uboot 0x1fc00>;
 101         mtd-mac-address-increment = <(-1)>;
 102 };
 103
 104 &eth1 {
 105         mtd-mac-address = <&uboot 0x1fc00>;
 106
 107         gmac-config {
 108                 device = <&gmac>;
 109                 switch-phy-swap = <1>;
 110         };
 111 };
 112
 113 &wmac {
 114         status = "okay";
 115
 116         mtd-cal-data = <&art 0x1000>;
 117         mtd-mac-address = <&uboot 0x1fc00>;
 118 };