target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &status;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wps {
  36                         label = "WPS button";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 status: power {
  47                         label = "pcs:amber:power";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan2g {
  53                         label = "pcs:blue:wlan";
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57
  58                 wan {
  59                         label = "pcs:blue:wan";
  60                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 lan1 {
  64                         label = "pcs:blue:lan1";
  65                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 lan2 {
  69                         label = "pcs:blue:lan2";
  70                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 lan3 {
  74                         label = "pcs:blue:lan3";
  75                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  76                 };
  77
  78                 lan4 {
  79                         label = "pcs:blue:lan4";
  80                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  81                 };
  82         };
  83 };
  84
  85 &ref {
  86         clock-frequency = <25000000>;
  87 };
  88
  89 &uart {
  90         status = "okay";
  91 };
  92
  93 &gpio {
  94         status = "okay";
  95 };
  96
  97 &spi {
  98         num-cs = <1>;
  99
 100         status = "okay";
 101
 102         flash@0 {
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <25000000>;
 106
 107                 partitions {
 108                         compatible = "fixed-partitions";
 109                         #address-cells = <1>;
 110                         #size-cells = <1>;
 111
 112                         uboot: partition@0 {
 113                                 label = "u-boot";
 114                                 reg = <0x000000 0x040000>;
 115                                 read-only;
 116                         };
 117
 118                         partition@40000 {
 119                                 label = "u-boot-env";
 120                                 reg = <0x040000 0x010000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@50000 {
 125                                 compatible = "denx,uimage";
 126                                 label = "firmware";
 127                                 reg = <0x050000 0x07a0000>;
 128                         };
 129
 130                         art: partition@7f0000 {
 131                                 label = "art";
 132                                 reg = <0x7f0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &wmac {
 140         status = "okay";
 141
 142         mtd-cal-data = <&art 0x1000>;
 143         mtd-mac-address = <&art 0x1002>;
 144 };
 145
 146 &eth0 {
 147         status = "okay";
 148
 149         phy-handle = <&swphy0>;
 150         mtd-mac-address = <&art 0x0>;
 151         mtd-mac-address-increment = <1>;
 152 };
 153
 154 &eth1 {
 155         status = "okay";
 156
 157         phy-handle = <&swphy4>;
 158         mtd-mac-address = <&art 0x0>;
 159         phy-mode = "gmii";
 160         pll-data = <0x06000000 0x00000101 0x00001616>;
 161
 162         gmac-config {
 163                 device = <&gmac>;
 164                 switch-phy-swap = <1>;
 165         };
 166 };