target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &status;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys";
  23
  24                 pinctrl-names = "default";
  25                 pinctrl-0 = <&jtag_disable_pins>;
  26
  27                 reset {
  28                         label = "Reset button";
  29                         linux,code = <KEY_RESTART>;
  30                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  31                         debounce-interval = <60>;
  32                 };
  33
  34                 wps {
  35                         label = "WPS button";
  36                         linux,code = <KEY_WPS_BUTTON>;
  37                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40         };
  41
  42         leds {
  43                 compatible = "gpio-leds";
  44
  45                 status: power {
  46                         label = "pcs:amber:power";
  47                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  48                         default-state = "on";
  49                 };
  50
  51                 wlan2g {
  52                         label = "pcs:blue:wlan";
  53                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  54                         linux,default-trigger = "phy0tpt";
  55                 };
  56
  57                 wan {
  58                         label = "pcs:blue:wan";
  59                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  60                 };
  61
  62                 lan1 {
  63                         label = "pcs:blue:lan1";
  64                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  65                 };
  66
  67                 lan2 {
  68                         label = "pcs:blue:lan2";
  69                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  70                 };
  71
  72                 lan3 {
  73                         label = "pcs:blue:lan3";
  74                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  75                 };
  76
  77                 lan4 {
  78                         label = "pcs:blue:lan4";
  79                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  80                 };
  81         };
  82 };
  83
  84 &ref {
  85         clock-frequency = <25000000>;
  86 };
  87
  88 &uart {
  89         status = "okay";
  90 };
  91
  92 &gpio {
  93         status = "okay";
  94 };
  95
  96 &spi {
  97         num-cs = <1>;
  98
  99         status = "okay";
 100
 101         flash@0 {
 102                 compatible = "jedec,spi-nor";
 103                 reg = <0>;
 104                 spi-max-frequency = <25000000>;
 105
 106                 partitions {
 107                         compatible = "fixed-partitions";
 108                         #address-cells = <1>;
 109                         #size-cells = <1>;
 110
 111                         uboot: partition@0 {
 112                                 label = "u-boot";
 113                                 reg = <0x000000 0x040000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@40000 {
 118                                 label = "u-boot-env";
 119                                 reg = <0x040000 0x010000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@50000 {
 124                                 compatible = "denx,uimage";
 125                                 label = "firmware";
 126                                 reg = <0x050000 0x07a0000>;
 127                         };
 128
 129                         art: partition@7f0000 {
 130                                 label = "art";
 131                                 reg = <0x7f0000 0x010000>;
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &wmac {
 139         status = "okay";
 140
 141         mtd-cal-data = <&art 0x1000>;
 142         mtd-mac-address = <&art 0x1002>;
 143 };
 144
 145 &eth0 {
 146         status = "okay";
 147
 148         phy-handle = <&swphy0>;
 149         mtd-mac-address = <&art 0x0>;
 150         mtd-mac-address-increment = <1>;
 151 };
 152
 153 &eth1 {
 154         status = "okay";
 155
 156         phy-handle = <&swphy4>;
 157         mtd-mac-address = <&art 0x0>;
 158         phy-mode = "gmii";
 159         pll-data = <0x06000000 0x00000101 0x00001616>;
 160
 161         gmac-config {
 162                 device = <&gmac>;
 163                 switch-phy-swap = <1>;
 164         };
 165 };