target/linux/ath79/dts/ar9341_pcs_cr3000.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9341.dtsi"
   8
   9 / {
  10         model = "PowerCloud Systems CR3000";
  11         compatible = "pcs,cr3000", "qca,ar9341";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &status;
  16                 led-failsafe = &status;
  17                 led-running = &status;
  18                 led-upgrade = &status;
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 pinctrl-names = "default";
  26                 pinctrl-0 = <&jtag_disable_pins>;
  27
  28                 reset {
  29                         label = "Reset button";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 wps {
  36                         label = "WPS button";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45
  46                 status: power {
  47                         label = "pcs:amber:power";
  48                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  49                         default-state = "on";
  50                 };
  51
  52                 wlan2g {
  53                         label = "pcs:blue:wlan";
  54                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 wan {
  60                         label = "pcs:blue:wan";
  61                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  62                         default-state = "off";
  63                 };
  64
  65                 lan1 {
  66                         label = "pcs:blue:lan1";
  67                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  68                         default-state = "off";
  69                 };
  70
  71                 lan2 {
  72                         label = "pcs:blue:lan2";
  73                         gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
  74                         default-state = "off";
  75                 };
  76
  77                 lan3 {
  78                         label = "pcs:blue:lan3";
  79                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  80                         default-state = "off";
  81                 };
  82
  83                 lan4 {
  84                         label = "pcs:blue:lan4";
  85                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  86                         default-state = "off";
  87                 };
  88         };
  89 };
  90
  91 &ref {
  92         clock-frequency = <25000000>;
  93 };
  94
  95 &uart {
  96         status = "okay";
  97 };
  98
  99 &gpio {
 100         status = "okay";
 101 };
 102
 103 &spi {
 104         num-cs = <1>;
 105
 106         status = "okay";
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         uboot: partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x000000 0x040000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@40000 {
 125                                 label = "u-boot-env";
 126                                 reg = <0x040000 0x010000>;
 127                                 read-only;
 128                         };
 129
 130                         partition@50000 {
 131                                 compatible = "denx,uimage";
 132                                 label = "firmware";
 133                                 reg = <0x050000 0x07a0000>;
 134                         };
 135
 136                         art: partition@7f0000 {
 137                                 label = "art";
 138                                 reg = <0x7f0000 0x010000>;
 139                                 read-only;
 140                         };
 141                 };
 142         };
 143 };
 144
 145 &wmac {
 146         status = "okay";
 147
 148         mtd-cal-data = <&art 0x1000>;
 149         mtd-mac-address = <&art 0x1002>;
 150 };
 151
 152 &eth0 {
 153         status = "okay";
 154
 155         phy-handle = <&swphy0>;
 156         mtd-mac-address = <&art 0x0>;
 157         mtd-mac-address-increment = <1>;
 158 };
 159
 160 &eth1 {
 161         status = "okay";
 162
 163         phy-handle = <&swphy4>;
 164         mtd-mac-address = <&art 0x0>;
 165         phy-mode = "gmii";
 166         pll-data = <0x06000000 0x00000101 0x00001616>;
 167
 168         gmac-config {
 169                 device = <&gmac>;
 170                 switch-phy-swap = <1>;
 171         };
 172 };