target/linux/ath79/dts/ar9331_tplink_tl-wr741nd-v4.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9331.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr741n-v4", "qca,ar9331";
  11         model = "TP-Link TL-WR741N/ND v4";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &system;
  16                 led-failsafe = &system;
  17                 led-running = &system;
  18                 led-upgrade = &system;
  19         };
  20
  21         gpio-keys-polled {
  22                 compatible = "gpio-keys-polled";
  23                 poll-interval = <20>;
  24
  25                 reset {
  26                         label = "reset";
  27                         linux,code = <KEY_RESTART>;
  28                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  29                         debounce-interval = <60>;
  30                 };
  31
  32                 wps {
  33                         label = "wps";
  34                         linux,code = <KEY_WPS_BUTTON>;
  35                         gpios = <&gpio 26 GPIO_ACTIVE_HIGH>;
  36                         debounce-interval = <60>;
  37                 };
  38         };
  39
  40         gpio-leds {
  41                 compatible = "gpio-leds";
  42                 pinctrl-names = "default";
  43                 pinctrl-0 = <&switch_led_pins>;
  44
  45                 lan1 {
  46                         label = "tp-link:green:lan1";
  47                         gpios = <&gpio 14 GPIO_ACTIVE_HIGH>;
  48                 };
  49
  50                 lan2 {
  51                         label = "tp-link:green:lan2";
  52                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  53                 };
  54
  55                 lan3 {
  56                         label = "tp-link:green:lan3";
  57                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  58                 };
  59
  60                 lan4 {
  61                         label = "tp-link:green:lan4";
  62                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 qss {
  66                         label = "tp-link:green:qss";
  67                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  68                 };
  69
  70                 system: system {
  71                         label = "tp-link:green:system";
  72                         gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
  73                 };
  74
  75                 wan {
  76                         label = "tp-link:green:wan";
  77                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  78                 };
  79
  80                 wlan {
  81                         label = "tp-link:green:wlan";
  82                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  83                         default-state = "off";
  84                         linux,default-trigger = "phy0tpt";
  85                 };
  86         };
  87 };
  88
  89 &spi {
  90         status = "okay";
  91         num-cs = <1>;
  92
  93         flash@0 {
  94                 compatible = "jedec,spi-nor";
  95                 reg = <0>;
  96                 spi-max-frequency = <25000000>;
  97
  98                 partitions {
  99                         compatible = "fixed-partitions";
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102
 103                         uboot: partition@0 {
 104                                 reg = <0x0 0x20000>;
 105                                 label = "u-boot";
 106                                 read-only;
 107                         };
 108
 109                         firmware: partition@20000 {
 110                                 compatible = "tplink,firmware";
 111                                 reg = <0x20000 0x3d0000>;
 112                                 label = "firmware";
 113                         };
 114
 115                         art: partition@3f0000 {
 116                                 reg = <0x3f0000 0x10000>;
 117                                 label = "art";
 118                                 read-only;
 119                         };
 120                 };
 121         };
 122 };
 123
 124 &eth0 {
 125         status = "okay";
 126
 127         mtd-mac-address = <&uboot 0x1fc00>;
 128         mtd-mac-address-increment = <1>;
 129
 130         gmac-config {
 131                 device = <&gmac>;
 132
 133                 switch-phy-addr-swap = <1>;
 134                 switch-phy-swap = <1>;
 135         };
 136 };
 137
 138 &eth1 {
 139         status = "okay";
 140
 141         mtd-mac-address = <&uboot 0x1fc00>;
 142         mtd-mac-address-increment = <(-1)>;
 143 };
 144
 145 &gpio {
 146         status = "okay";
 147 };
 148
 149 &uart {
 150         status = "okay";
 151 };
 152
 153 &wmac {
 154         status = "okay";
 155         mtd-cal-data = <&art 0x1000>;
 156         mtd-mac-address = <&uboot 0x1fc00>;
 157 };