target/linux/ath79/dts/ar9330_glinet_ar150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9330.dtsi"
   8
   9 / {
  10         model = "GL.iNet GL-AR150";
  11         compatible = "glinet,ar150", "qca,ar9330";
  12
  13         aliases {
  14                 serial0 = &uart;
  15                 led-boot = &wlan;
  16                 led-failsafe = &wlan;
  17                 led-upgrade = &wlan;
  18         };
  19
  20         leds {
  21                 compatible = "gpio-leds";
  22
  23                 wlan: wlan {
  24                         label = "gl-ar150:orange:wlan";
  25                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  26                         default-state = "off";
  27                         linux,default-trigger = "phy0tpt";
  28                 };
  29
  30                 lan {
  31                         label = "gl-ar150:green:lan";
  32                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  33                         default-state = "off";
  34                 };
  35
  36                 wan {
  37                         label = "gl-ar150:green:wan";
  38                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  39                         default-state = "off";
  40                 };
  41         };
  42
  43         keys {
  44                 compatible = "gpio-keys-polled";
  45                 poll-interval = <100>;
  46
  47                 manual {
  48                         label = "manual";
  49                         linux,code = <BTN_7>;
  50                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  51                 };
  52
  53                 auto {
  54                         label = "auto";
  55                         linux,code = <BTN_8>;
  56                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  57                 };
  58
  59                 reset {
  60                         label = "reset";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  63                 };
  64         };
  65 };
  66
  67 &uart {
  68         status = "okay";
  69 };
  70
  71 &gpio {
  72         status = "okay";
  73 };
  74
  75 &usb {
  76         dr_mode = "host";
  77         status = "okay";
  78 };
  79
  80 &usb_phy {
  81         status = "okay";
  82         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  83 };
  84
  85 &spi {
  86         num-chipselects = <1>;
  87         status = "okay";
  88
  89         flash@0 {
  90                 compatible = "jedec,spi-nor";
  91                 spi-max-frequency = <104000000>;
  92                 reg = <0>;
  93
  94                 partitions {
  95                         compatible = "fixed-partitions";
  96                         #address-cells = <1>;
  97                         #size-cells = <1>;
  98
  99                         partition@0 {
 100                                 label = "u-boot";
 101                                 reg = <0x000000 0x040000>;
 102                                 read-only;
 103                         };
 104
 105                         partition@1 {
 106                                 label = "u-boot-env";
 107                                 reg = <0x040000 0x010000>;
 108                         };
 109
 110                         partition@2 {
 111                                 compatible = "denx,uimage";
 112                                 label = "firmware";
 113                                 reg = <0x050000 0xfa0000>;
 114                         };
 115
 116                         art: partition@3 {
 117                                 label = "ART";
 118                                 reg = <0xff0000 0x010000>;
 119                                 read-only;
 120                         };
 121                 };
 122         };
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127
 128         mtd-mac-address = <&art 0x0>;
 129 };
 130
 131 &eth1 {
 132         status = "okay";
 133
 134         mtd-mac-address = <&art 0x0>;
 135
 136         gmac-config {
 137                 device = <&gmac>;
 138
 139                 switch-phy-addr-swap = <0>;
 140                 switch-phy-swap = <0>;
 141         };
 142 };
 143
 144 &wmac {
 145         status = "okay";
 146         mtd-cal-data = <&art 0x1000>;
 147         mtd-mac-address = <&art 0x0>;
 148 };