target/linux/ath79/dts/ar9330_glinet_ar150.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9330.dtsi"
   8
   9 / {
  10         model = "GL.iNet GL-AR150";
  11         compatible = "glinet,ar150", "qca,ar9330";
  12
  13         aliases {
  14                 serial0 = &uart;
  15         };
  16
  17         memory@0 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x4000000>;
  20         };
  21
  22         leds {
  23                 compatible = "gpio-leds";
  24
  25                 wlan {
  26                         label = "gl-ar150:orange:wlan";
  27                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  28                         default-state = "off";
  29                 };
  30
  31                 lan {
  32                         label = "gl-ar150:green:lan";
  33                         gpios = <&gpio 13 GPIO_ACTIVE_HIGH>;
  34                         default-state = "off";
  35                 };
  36
  37                 wan {
  38                         label = "gl-ar150:green:wan";
  39                         gpios = <&gpio 15 GPIO_ACTIVE_HIGH>;
  40                         default-state = "off";
  41                 };
  42         };
  43
  44         keys {
  45                 compatible = "gpio-keys-polled";
  46                 #address-cells = <1>;
  47                 #size-cells = <0>;
  48                 poll-interval = <100>;
  49
  50                 manual {
  51                         label = "manual";
  52                         linux,code = <BTN_7>;
  53                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  54                 };
  55
  56                 auto {
  57                         label = "auto";
  58                         linux,code = <BTN_8>;
  59                         gpios = <&gpio 8 GPIO_ACTIVE_HIGH>;
  60                 };
  61
  62                 reset {
  63                         label = "reset";
  64                         linux,code = <KEY_RESTART>;
  65                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  66                 };
  67         };
  68 };
  69
  70 &uart {
  71         status = "okay";
  72 };
  73
  74 &gpio {
  75         status = "okay";
  76 };
  77
  78 &usb {
  79         dr_mode = "host";
  80         status = "okay";
  81 };
  82
  83 &usb_phy {
  84         status = "okay";
  85         gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
  86 };
  87
  88 &spi {
  89         num-chipselects = <1>;
  90         status = "okay";
  91
  92         spiflash@0 {
  93                 #address-cells = <1>;
  94                 #size-cells = <1>;
  95                 compatible = "jedec,spi-nor";
  96                 spi-max-frequency = <104000000>;
  97                 reg = <0>;
  98
  99                 partitions {
 100                         compatible = "fixed-partitions";
 101                         #address-cells = <1>;
 102                         #size-cells = <1>;
 103
 104                         partition@0 {
 105                                 label = "u-boot";
 106                                 reg = <0x000000 0x040000>;
 107                                 read-only;
 108                         };
 109
 110                         partition@1 {
 111                                 label = "u-boot-env";
 112                                 reg = <0x040000 0x010000>;
 113                         };
 114
 115                         partition@2 {
 116                                 label = "firmware";
 117                                 reg = <0x050000 0xfa0000>;
 118                         };
 119
 120                         art: partition@3 {
 121                                 label = "ART";
 122                                 reg = <0xff0000 0x010000>;
 123                                 read-only;
 124                         };
 125                 };
 126         };
 127 };
 128
 129 &mdio0 {
 130         status = "okay";
 131
 132         phy4: ethernet-phy@4 {
 133                 reg = <4>;
 134                 phy-mode = "mii";
 135         };
 136 };
 137
 138 &eth0 {
 139         status = "okay";
 140
 141         mtd-mac-address = <&art 0x0>;
 142
 143         phy-handle = <&phy4>;
 144 };
 145
 146 &eth1 {
 147         status = "okay";
 148
 149         mtd-mac-address = <&art 0x0>;
 150
 151         fixed-link {
 152                 speed = <1000>;
 153                 full-duplex;
 154         };
 155
 156         gmac-config {
 157                 device = <&gmac>;
 158
 159                 switch-phy-addr-swap = <0>;
 160                 switch-phy-swap = <0>;
 161         };
 162 };
 163
 164 &wmac {
 165         status = "okay";
 166         mtd-cal-data = <&art 0x1000>;
 167         mtd-mac-address = <&art 0x0>;
 168 };