target/linux/ath79/dts/ar9132_tplink_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND Version 1";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25
  26                 button0 {
  27                         label = "reset";
  28                         linux,code = <KEY_RESTART>;
  29                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  30                         debounce-interval = <60>;
  31                 };
  32
  33                 button1 {
  34                         label = "qss";
  35                         linux,code = <KEY_WPS_BUTTON>;
  36                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39         };
  40
  41         leds {
  42                 compatible = "gpio-leds";
  43                 usb {
  44                         label = "tp-link:green:usb";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  46                         default-state = "off";
  47                         trigger-sources = <&hub_port>;
  48                         linux,default-trigger = "usbport";
  49                 };
  50
  51                 system: system {
  52                         label = "tp-link:green:system";
  53                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  54                         linux,default-trigger = "heartbeat";
  55                 };
  56
  57                 qss {
  58                         label = "tp-link:green:qss";
  59                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  60                 };
  61
  62                 wlan {
  63                         label = "tp-link:green:wlan";
  64                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  65                         default-state = "off";
  66                         linux,default-trigger = "phy0tpt";
  67                 };
  68         };
  69
  70         rtl8366rb {
  71                 compatible = "realtek,rtl8366rb";
  72                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  73                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  74
  75                 resets = <&rst 8>;
  76                 reset-names = "switch";
  77         };
  78 };
  79
  80 &uart {
  81         status = "okay";
  82 };
  83
  84 &pll {
  85         clocks = <&extosc>;
  86 };
  87
  88 &usb {
  89         #address-cells = <1>;
  90         #size-cells = <0>;
  91         status = "okay";
  92
  93         hub_port: port@1 {
  94                 reg = <1>;
  95                 #trigger-source-cells = <0>;
  96         };
  97 };
  98
  99 &usb_phy {
 100         status = "okay";
 101 };
 102
 103 &spi {
 104         status = "okay";
 105         num-cs = <1>;
 106
 107         flash@0 {
 108                 compatible = "jedec,spi-nor";
 109                 reg = <0>;
 110                 spi-max-frequency = <25000000>;
 111
 112                 partitions {
 113                         compatible = "fixed-partitions";
 114                         #address-cells = <1>;
 115                         #size-cells = <1>;
 116
 117                         uboot: partition@0 {
 118                                 label = "u-boot";
 119                                 reg = <0x000000 0x020000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@20000 {
 124                                 label = "firmware";
 125                                 reg = <0x020000 0x7D0000>;
 126                         };
 127
 128                         art: partition@7F0000 {
 129                                 label = "art";
 130                                 reg = <0x7F0000 0x010000>;
 131                                 read-only;
 132                         };
 133                 };
 134         };
 135 };
 136
 137 &eth0 {
 138         status = "okay";
 139
 140         phy-mode = "rgmii";
 141         mtd-mac-address = <&uboot 0x1fc00>;
 142
 143         resets = <&rst 9>;
 144         reset-names = "mac";
 145
 146         fixed-link {
 147                 speed = <1000>;
 148                 full-duplex;
 149         };
 150 };
 151
 152 &wmac {
 153         status = "okay";
 154         mtd-cal-data = <&art 0x1000>;
 155         mtd-mac-address = <&uboot 0x1fc00>;
 156 };