target/linux/ath79/dts/ar9132_tplink_tl-wa901nd-v2.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wa901nd-v2", "qca,ar9132";
  11         model = "TP-Link TL-WA901ND v2";
  12
  13         aliases {
  14                 led-boot = &led_system;
  15                 led-failsafe = &led_system;
  16                 led-running = &led_system;
  17                 led-upgrade = &led_system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <40000000>;
  25         };
  26
  27         keys {
  28                 compatible = "gpio-keys";
  29
  30                 reset {
  31                         label = "reset";
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  34                         debounce-interval = <60>;
  35                 };
  36
  37                 qss {
  38                         label = "qss";
  39                         linux,code = <KEY_WPS_BUTTON>;
  40                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  41                         debounce-interval = <60>;
  42                 };
  43         };
  44
  45         leds {
  46                 compatible = "gpio-leds";
  47
  48                 led_system: system {
  49                         label = "tp-link:green:system";
  50                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 qss {
  54                         label = "tp-link:green:qss";
  55                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  56                 };
  57
  58                 wlan {
  59                         label = "tp-link:green:wlan";
  60                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "phy0tpt";
  62                 };
  63         };
  64 };
  65
  66 &uart {
  67         status = "okay";
  68 };
  69
  70 &pll {
  71         clocks = <&extosc>;
  72 };
  73
  74 &spi {
  75         status = "okay";
  76
  77         num-cs = <1>;
  78
  79         flash@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <25000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         uboot: partition@0 {
  90                                 label = "u-boot";
  91                                 reg = <0x000000 0x020000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@1 {
  96                                 compatible = "tplink,firmware";
  97                                 label = "firmware";
  98                                 reg = <0x020000 0x3D0000>;
  99                         };
 100
 101                         art: partition@2 {
 102                                 label = "art";
 103                                 reg = <0x3F0000 0x010000>;
 104                                 read-only;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &mdio0 {
 111         status = "okay";
 112
 113         phy12: ethernet-phy@c {
 114                 reg = <0xc>;
 115                 phy-mode = "mii";
 116
 117                 resets = <&rst 8>;
 118                 reset-names = "phy";
 119
 120                 reset-assert-us = <10000>;
 121                 reset-deassert-us = <10000>;
 122         };
 123 };
 124
 125 &eth0 {
 126         status = "okay";
 127
 128         mtd-mac-address = <&uboot 0x1fc00>;
 129
 130         phy-handle = <&phy12>;
 131 };
 132
 133 &wmac {
 134         status = "okay";
 135
 136         mtd-cal-data = <&art 0x1000>;
 137         mtd-mac-address = <&uboot 0x1fc00>;
 138 };