target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND Version 1";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         extosc: ref {
  18                 compatible = "fixed-clock";
  19                 #clock-cells = <0>;
  20                 clock-frequency = <40000000>;
  21         };
  22
  23         keys {
  24                 compatible = "gpio-keys";
  25                 #address-cells = <1>;
  26                 #size-cells = <0>;
  27
  28                 button0 {
  29                         label = "reset";
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34
  35                 button1 {
  36                         label = "qss";
  37                         linux,code = <KEY_WPS_BUTTON>;
  38                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41         };
  42
  43         leds {
  44                 compatible = "gpio-leds";
  45                 usb {
  46                         label = "tp-link:green:usb";
  47                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  48                         default-state = "off";
  49                         trigger-sources = <&hub_port>;
  50                         linux,default-trigger = "usbport";
  51                 };
  52
  53                 system: system {
  54                         label = "tp-link:green:system";
  55                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "heartbeat";
  57                 };
  58
  59                 qss {
  60                         label = "tp-link:green:qss";
  61                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  62                 };
  63
  64                 wlan {
  65                         label = "tp-link:green:wlan";
  66                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  67                         default-state = "off";
  68                         linux,default-trigger = "phy0tpt";
  69                 };
  70         };
  71
  72         rtl8366rb {
  73                 compatible = "realtek,rtl8366rb";
  74                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  75                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  76
  77                 resets = <&rst 8>;
  78                 reset-names = "switch";
  79
  80                 mdio-bus {
  81                         status = "okay";
  82
  83                         phy0: ethernet-phy@0 {
  84                                 reg = <0>;
  85                         };
  86                 };
  87         };
  88
  89 };
  90
  91 &uart {
  92         status = "okay";
  93 };
  94
  95 &pll {
  96         clocks = <&extosc>;
  97 };
  98
  99 &usb {
 100         status = "okay";
 101
 102         hub_port: port@1 {
 103                 reg = <1>;
 104                 #trigger-source-cells = <0>;
 105         };
 106 };
 107
 108 &usb_phy {
 109         status = "okay";
 110 };
 111
 112 &spi {
 113         status = "okay";
 114         num-cs = <1>;
 115
 116         flash@0 {
 117                 #address-cells = <1>;
 118                 #size-cells = <1>;
 119                 compatible = "jedec,spi-nor";
 120                 reg = <0>;
 121                 spi-max-frequency = <25000000>;
 122
 123                 partitions {
 124                         compatible = "fixed-partitions";
 125                         #address-cells = <1>;
 126                         #size-cells = <1>;
 127
 128                         uboot: partition@0 {
 129                                 label = "u-boot";
 130                                 reg = <0x000000 0x020000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@20000 {
 135                                 label = "firmware";
 136                                 reg = <0x020000 0x7D0000>;
 137                         };
 138
 139                         art: partition@7F0000 {
 140                                 label = "art";
 141                                 reg = <0x7F0000 0x010000>;
 142                                 read-only;
 143                         };
 144                 };
 145         };
 146 };
 147
 148 &eth0 {
 149         status = "okay";
 150
 151         phy-mode = "rgmii";
 152         mtd-mac-address = <&uboot 0x1fc00>;
 153
 154         resets = <&rst 9>;
 155         reset-names = "mac";
 156
 157         phy-handle = <&phy0>;
 158         fixed-link {
 159                 speed = <1000>;
 160                 full-duplex;
 161         };
 162 };
 163
 164 &wmac {
 165         status = "okay";
 166         mtd-cal-data = <&art 0x1000>;
 167         mtd-mac-address = <&uboot 0x1fc00>;
 168 };