target/linux/ath79/dts/ar9132_tl-wr1043nd-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar9132.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr1043nd-v1", "qca,ar9132";
  11         model = "TP-Link TL-WR1043ND Version 1";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         memory@0 {
  18                 device_type = "memory";
  19                 reg = <0x0 0x2000000>;
  20         };
  21
  22         extosc: ref {
  23                 compatible = "fixed-clock";
  24                 #clock-cells = <0>;
  25                 clock-frequency = <40000000>;
  26         };
  27
  28         keys {
  29                 compatible = "gpio-keys";
  30                 #address-cells = <1>;
  31                 #size-cells = <0>;
  32
  33                 button0 {
  34                         label = "reset";
  35                         linux,code = <KEY_RESTART>;
  36                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39
  40                 button1 {
  41                         label = "qss";
  42                         linux,code = <KEY_WPS_BUTTON>;
  43                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  44                         debounce-interval = <60>;
  45                 };
  46         };
  47
  48         leds {
  49                 compatible = "gpio-leds";
  50                 usb {
  51                         label = "tp-link:green:usb";
  52                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  53                         default-state = "off";
  54                         trigger-sources = <&hub_port>;
  55                         linux,default-trigger = "usbport";
  56                 };
  57
  58                 system: system {
  59                         label = "tp-link:green:system";
  60                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  61                         linux,default-trigger = "heartbeat";
  62                 };
  63
  64                 qss {
  65                         label = "tp-link:green:qss";
  66                         gpios = <&gpio 5 GPIO_ACTIVE_HIGH>;
  67                 };
  68
  69                 wlan {
  70                         label = "tp-link:green:wlan";
  71                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  72                         default-state = "off";
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75         };
  76
  77         rtl8366rb {
  78                 compatible = "realtek,rtl8366rb";
  79                 gpio-sda = <&gpio 18 GPIO_ACTIVE_HIGH>;
  80                 gpio-sck = <&gpio 19 GPIO_ACTIVE_HIGH>;
  81
  82                 resets = <&rst 8>;
  83                 reset-names = "switch";
  84
  85                 mdio-bus {
  86                         status = "okay";
  87
  88                         phy0: ethernet-phy@0 {
  89                                 reg = <0>;
  90                         };
  91                 };
  92         };
  93
  94 };
  95
  96 &uart {
  97         status = "okay";
  98 };
  99
 100 &pll {
 101         clocks = <&extosc>;
 102 };
 103
 104 &usb {
 105         status = "okay";
 106
 107         hub_port: port@1 {
 108                 reg = <1>;
 109                 #trigger-source-cells = <0>;
 110         };
 111 };
 112
 113 &usb_phy {
 114         status = "okay";
 115 };
 116
 117 &spi {
 118         status = "okay";
 119         num-cs = <1>;
 120
 121         flash@0 {
 122                 #address-cells = <1>;
 123                 #size-cells = <1>;
 124                 compatible = "jedec,spi-nor";
 125                 reg = <0>;
 126                 spi-max-frequency = <25000000>;
 127
 128                 partitions {
 129                         compatible = "fixed-partitions";
 130                         #address-cells = <1>;
 131                         #size-cells = <1>;
 132
 133                         uboot: partition@0 {
 134                                 label = "u-boot";
 135                                 reg = <0x000000 0x020000>;
 136                                 read-only;
 137                         };
 138
 139                         partition@20000 {
 140                                 label = "firmware";
 141                                 reg = <0x020000 0x7D0000>;
 142                         };
 143
 144                         art: partition@7F0000 {
 145                                 label = "art";
 146                                 reg = <0x7F0000 0x010000>;
 147                                 read-only;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &eth0 {
 154         status = "okay";
 155
 156         phy-mode = "rgmii";
 157         mtd-mac-address = <&uboot 0x1fc00>;
 158
 159         resets = <&rst 9>;
 160         reset-names = "mac";
 161
 162         phy-handle = <&phy0>;
 163         fixed-link {
 164                 speed = <1000>;
 165                 full-duplex;
 166         };
 167 };
 168
 169 &wmac {
 170         status = "okay";
 171         mtd-cal-data = <&art 0x1000>;
 172         mtd-mac-address = <&uboot 0x1fc00>;
 173 };