target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
  11         model = "TP-LINK TL-WR2543N/ND";
  12
  13         aliases {
  14                 led-boot = &system;
  15                 led-failsafe = &system;
  16                 led-running = &system;
  17                 led-upgrade = &system;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200n8";
  22         };
  23
  24         extosc: ref {
  25                 compatible = "fixed-clock";
  26                 #clock-cells = <0>;
  27                 clock-frequency = <40000000>;
  28         };
  29
  30         gpio-keys {
  31                 compatible = "gpio-keys-polled";
  32                 poll-interval = <20>;
  33
  34                 reset {
  35                         label = "reset";
  36                         linux,code = <KEY_RESTART>;
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40
  41                 wps {
  42                         label = "wps";
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <60>;
  46                 };
  47         };
  48
  49         leds {
  50                 compatible = "gpio-leds";
  51
  52                 system: wps {
  53                         label = "tplink:green:wps";
  54                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  55                         default-state = "off";
  56                 };
  57
  58                 usb {
  59                         label = "tplink:green:usb";
  60                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  61                         default-state = "off";
  62                         trigger-sources = <&hub_port>;
  63                         linux,default-trigger = "usbport";
  64                 };
  65         };
  66
  67         ath9k-leds {
  68                 compatible = "gpio-leds";
  69
  70                 wlan2g {
  71                         label = "tplink:green:wlan2g";
  72                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  73                         default-state = "off";
  74                         linux,default-trigger = "phy0tpt";
  75                 };
  76
  77                 wlan5g {
  78                         label = "tplink:green:wlan5g";
  79                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  80                         default-state = "off";
  81                         linux,default-trigger = "phy0tpt";
  82                 };
  83         };
  84
  85         rtl8367 {
  86                 compatible = "realtek,rtl8367";
  87                 gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
  88                 gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
  89                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  90
  91                 mdio-bus {
  92                         #address-cells = <1>;
  93                         #size-cells = <0>;
  94                         status = "okay";
  95
  96                         phy0: ethernet-phy@0 {
  97                                 reg = <0>;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &pll {
 104         clocks = <&extosc>;
 105 };
 106
 107 &spi {
 108         status = "okay";
 109         num-cs = <1>;
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         uboot:  partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x020000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@20000 {
 128                                 label = "firmware";
 129                                 reg = <0x020000 0x7d0000>;
 130                         };
 131
 132                         partition@7f0000 {
 133                                 label = "art";
 134                                 reg = <0x7f0000 0x010000>;
 135                                 read-only;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &uart {
 142         status = "okay";
 143 };
 144
 145 &usb {
 146         #address-cells = <1>;
 147         #size-cells = <0>;
 148         status = "okay";
 149
 150         hub_port: port@1 {
 151                 reg = <1>;
 152                 #trigger-source-cells = <0>;
 153         };
 154 };
 155
 156 &usb_phy {
 157         status = "okay";
 158 };
 159
 160 &pcie {
 161         status = "okay";
 162
 163         ath9k: wifi@0,0 {
 164                 reg = <0x0000 0 0 0 0>;
 165                 #gpio-cells = <2>;
 166                 gpio-controller;
 167                 qca,no-eeprom;
 168                 mtd-mac-address = <&uboot 0x1fc00>;
 169         };
 170 };
 171
 172 &eth0 {
 173         status = "okay";
 174
 175         phy-mode = "rgmii";
 176         mtd-mac-address = <&uboot 0x1fc00>;
 177
 178         phy-handle = <&phy0>;
 179         fixed-link {
 180                 speed = <1000>;
 181                 full-duplex;
 182         };
 183 };