target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
  11         model = "TP-Link TL-WR2543N/ND";
  12
  13         aliases {
  14                 led-boot = &system;
  15                 led-failsafe = &system;
  16                 led-running = &system;
  17                 led-upgrade = &system;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         extosc: ref {
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-frequency = <40000000>;
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys-polled";
  33                 poll-interval = <20>;
  34
  35                 reset {
  36                         label = "reset";
  37                         linux,code = <KEY_RESTART>;
  38                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  39                         debounce-interval = <60>;
  40                 };
  41
  42                 wps {
  43                         label = "wps";
  44                         linux,code = <KEY_WPS_BUTTON>;
  45                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  46                         debounce-interval = <60>;
  47                 };
  48         };
  49
  50         leds {
  51                 compatible = "gpio-leds";
  52
  53                 system: wps {
  54                         label = "tplink:green:wps";
  55                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 usb {
  59                         label = "tplink:green:usb";
  60                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  61                         trigger-sources = <&hub_port>;
  62                         linux,default-trigger = "usbport";
  63                 };
  64         };
  65
  66         ath9k-leds {
  67                 compatible = "gpio-leds";
  68
  69                 wlan2g {
  70                         label = "tplink:green:wlan2g";
  71                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  72                         linux,default-trigger = "phy0tpt";
  73                 };
  74
  75                 wlan5g {
  76                         label = "tplink:green:wlan5g";
  77                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  78                         linux,default-trigger = "phy0tpt";
  79                 };
  80         };
  81
  82         rtl8367 {
  83                 compatible = "realtek,rtl8367";
  84                 gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
  85                 gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
  86                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  87
  88                 mdio-bus {
  89                         #address-cells = <1>;
  90                         #size-cells = <0>;
  91                         status = "okay";
  92
  93                         phy0: ethernet-phy@0 {
  94                                 reg = <0>;
  95                         };
  96                 };
  97         };
  98 };
  99
 100 &pll {
 101         clocks = <&extosc>;
 102 };
 103
 104 &spi {
 105         status = "okay";
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         uboot:  partition@0 {
 119                                 label = "u-boot";
 120                                 reg = <0x000000 0x020000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@20000 {
 125                                 compatible = "tplink,firmware";
 126                                 label = "firmware";
 127                                 reg = <0x020000 0x7d0000>;
 128                         };
 129
 130                         partition@7f0000 {
 131                                 label = "art";
 132                                 reg = <0x7f0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &uart {
 140         status = "okay";
 141 };
 142
 143 &usb {
 144         #address-cells = <1>;
 145         #size-cells = <0>;
 146         status = "okay";
 147
 148         hub_port: port@1 {
 149                 reg = <1>;
 150                 #trigger-source-cells = <0>;
 151         };
 152 };
 153
 154 &usb_phy {
 155         status = "okay";
 156 };
 157
 158 &pcie {
 159         status = "okay";
 160
 161         ath9k: wifi@0,0 {
 162                 reg = <0x0000 0 0 0 0>;
 163                 #gpio-cells = <2>;
 164                 gpio-controller;
 165                 qca,no-eeprom;
 166                 mtd-mac-address = <&uboot 0x1fc00>;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         phy-mode = "rgmii";
 174         mtd-mac-address = <&uboot 0x1fc00>;
 175
 176         phy-handle = <&phy0>;
 177         fixed-link {
 178                 speed = <1000>;
 179                 full-duplex;
 180         };
 181 };