target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
  11         model = "TP-Link TL-WR2543N/ND";
  12
  13         aliases {
  14                 led-boot = &led_wps;
  15                 led-failsafe = &led_wps;
  16                 led-running = &led_wps;
  17                 led-upgrade = &led_wps;
  18                 label-mac-device = &eth0;
  19         };
  20
  21         chosen {
  22                 bootargs = "console=ttyS0,115200n8";
  23         };
  24
  25         extosc: ref {
  26                 compatible = "fixed-clock";
  27                 #clock-cells = <0>;
  28                 clock-frequency = <40000000>;
  29         };
  30
  31         keys {
  32                 compatible = "gpio-keys";
  33
  34                 reset {
  35                         label = "reset";
  36                         linux,code = <KEY_RESTART>;
  37                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  38                         debounce-interval = <60>;
  39                 };
  40
  41                 wps {
  42                         label = "wps";
  43                         linux,code = <KEY_WPS_BUTTON>;
  44                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  45                         debounce-interval = <60>;
  46                 };
  47         };
  48
  49         leds {
  50                 compatible = "gpio-leds";
  51
  52                 led_wps: wps {
  53                         label = "tplink:green:wps";
  54                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  55                 };
  56
  57                 usb {
  58                         label = "tplink:green:usb";
  59                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  60                         trigger-sources = <&hub_port>;
  61                         linux,default-trigger = "usbport";
  62                 };
  63         };
  64
  65         ath9k-leds {
  66                 compatible = "gpio-leds";
  67
  68                 wlan2g {
  69                         label = "tplink:green:wlan2g";
  70                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  71                         linux,default-trigger = "phy0tpt";
  72                 };
  73
  74                 wlan5g {
  75                         label = "tplink:green:wlan5g";
  76                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  77                         linux,default-trigger = "phy0tpt";
  78                 };
  79         };
  80
  81         rtl8367 {
  82                 compatible = "realtek,rtl8367";
  83                 gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
  84                 gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
  85                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  86
  87                 mdio-bus {
  88                         #address-cells = <1>;
  89                         #size-cells = <0>;
  90                         status = "okay";
  91
  92                         phy0: ethernet-phy@0 {
  93                                 reg = <0>;
  94                         };
  95                 };
  96         };
  97 };
  98
  99 &pll {
 100         clocks = <&extosc>;
 101 };
 102
 103 &spi {
 104         status = "okay";
 105
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112                 m25p,fast-read;
 113
 114                 partitions {
 115                         compatible = "fixed-partitions";
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118
 119                         uboot:  partition@0 {
 120                                 label = "u-boot";
 121                                 reg = <0x000000 0x020000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@20000 {
 126                                 compatible = "tplink,firmware";
 127                                 label = "firmware";
 128                                 reg = <0x020000 0x7d0000>;
 129                         };
 130
 131                         partition@7f0000 {
 132                                 label = "art";
 133                                 reg = <0x7f0000 0x010000>;
 134                                 read-only;
 135                         };
 136                 };
 137         };
 138 };
 139
 140 &uart {
 141         status = "okay";
 142 };
 143
 144 &usb {
 145         #address-cells = <1>;
 146         #size-cells = <0>;
 147         status = "okay";
 148
 149         hub_port: port@1 {
 150                 reg = <1>;
 151                 #trigger-source-cells = <0>;
 152         };
 153 };
 154
 155 &usb_phy {
 156         status = "okay";
 157 };
 158
 159 &pcie {
 160         status = "okay";
 161
 162         ath9k: wifi@0,0 {
 163                 reg = <0x0000 0 0 0 0>;
 164                 #gpio-cells = <2>;
 165                 gpio-controller;
 166                 qca,no-eeprom;
 167                 mtd-mac-address = <&uboot 0x1fc00>;
 168         };
 169 };
 170
 171 &eth0 {
 172         status = "okay";
 173
 174         phy-mode = "rgmii";
 175         mtd-mac-address = <&uboot 0x1fc00>;
 176
 177         phy-handle = <&phy0>;
 178         fixed-link {
 179                 speed = <1000>;
 180                 full-duplex;
 181         };
 182 };