target/linux/ath79/dts/ar7242_tplink_tl-wr2543-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
  11         model = "TP-LINK TL-WR2543N/ND";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200n8";
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <40000000>;
  25         };
  26
  27         gpio-keys {
  28                 compatible = "gpio-keys-polled";
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         linux,code = <KEY_RESTART>;
  34                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  35                         debounce-interval = <60>;
  36                 };
  37
  38                 wps {
  39                         label = "wps";
  40                         linux,code = <KEY_WPS_BUTTON>;
  41                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  42                         debounce-interval = <60>;
  43                 };
  44         };
  45
  46         leds {
  47                 compatible = "gpio-leds";
  48
  49                 system: wps {
  50                         label = "tplink:green:wps";
  51                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                 };
  54
  55                 usb {
  56                         label = "tplink:green:usb";
  57                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  58                         default-state = "off";
  59                         trigger-sources = <&hub_port>;
  60                         linux,default-trigger = "usbport";
  61                 };
  62         };
  63
  64         ath9k-leds {
  65                 compatible = "gpio-leds";
  66
  67                 wlan2g {
  68                         label = "tplink:green:wlan2g";
  69                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  70                         default-state = "off";
  71                         linux,default-trigger = "phy0tpt";
  72                 };
  73
  74                 wlan5g {
  75                         label = "tplink:green:wlan5g";
  76                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  77                         default-state = "off";
  78                         linux,default-trigger = "phy0tpt";
  79                 };
  80
  81         };
  82
  83         rtl8367 {
  84                 compatible = "realtek,rtl8367";
  85                 gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
  86                 gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
  87                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  88
  89                 mdio-bus {
  90                         #address-cells = <1>;
  91                         #size-cells = <0>;
  92                         status = "okay";
  93
  94                         phy0: ethernet-phy@0 {
  95                                 reg = <0>;
  96                         };
  97                 };
  98         };
  99 };
 100
 101 &pll {
 102         clocks = <&extosc>;
 103 };
 104
 105 &spi {
 106         status = "okay";
 107         num-cs = <1>;
 108
 109         flash@0 {
 110                 compatible = "jedec,spi-nor";
 111                 reg = <0>;
 112                 spi-max-frequency = <25000000>;
 113
 114                 partitions {
 115                         compatible = "fixed-partitions";
 116                         #address-cells = <1>;
 117                         #size-cells = <1>;
 118
 119                         uboot:  partition@0 {
 120                                 label = "u-boot";
 121                                 reg = <0x000000 0x020000>;
 122                                 read-only;
 123                         };
 124
 125                         partition@20000 {
 126                                 label = "firmware";
 127                                 reg = <0x020000 0x7d0000>;
 128                         };
 129
 130                         partition@7f0000 {
 131                                 label = "art";
 132                                 reg = <0x7f0000 0x010000>;
 133                                 read-only;
 134                         };
 135                 };
 136         };
 137 };
 138
 139 &uart {
 140         status = "okay";
 141 };
 142
 143 &usb {
 144         #address-cells = <1>;
 145         #size-cells = <0>;
 146         status = "okay";
 147
 148         hub_port: port@1 {
 149                 reg = <1>;
 150                 #trigger-source-cells = <0>;
 151         };
 152 };
 153
 154 &usb_phy {
 155         status = "okay";
 156 };
 157
 158 &pcie {
 159         status = "okay";
 160
 161         ath9k: wifi@0,0 {
 162                 reg = <0x0000 0 0 0 0>;
 163                 #gpio-cells = <2>;
 164                 gpio-controller;
 165                 qca,no-eeprom;
 166                 mtd-mac-address = <&uboot 0x1fc00>;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         phy-mode = "rgmii";
 174         mtd-mac-address = <&uboot 0x1fc00>;
 175
 176         phy-handle = <&phy0>;
 177         fixed-link {
 178                 speed = <1000>;
 179                 full-duplex;
 180         };
 181 };