target/linux/ath79/dts/ar7242_tl-wr2543-v1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "tplink,tl-wr2543-v1", "qca,ar7242";
  11         model = "TP-LINK TL-WR2543N/ND";
  12
  13         aliases {
  14                 led-status = &system;
  15         };
  16
  17         chosen {
  18                 bootargs = "console=ttyS0,115200n8";
  19         };
  20
  21         extosc: ref {
  22                 compatible = "fixed-clock";
  23                 #clock-cells = <0>;
  24                 clock-frequency = <40000000>;
  25         };
  26
  27         gpio-keys {
  28                 compatible = "gpio-keys-polled";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31                 poll-interval = <20>;
  32
  33                 reset {
  34                         label = "reset";
  35                         linux,code = <KEY_RESTART>;
  36                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  37                         debounce-interval = <60>;
  38                 };
  39
  40                 wps {
  41                         label = "wps";
  42                         linux,code = <KEY_WPS_BUTTON>;
  43                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  44                         debounce-interval = <60>;
  45                 };
  46         };
  47
  48         leds {
  49                 compatible = "gpio-leds";
  50
  51                 system: wps {
  52                         label = "tplink:green:wps";
  53                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  54                         default-state = "off";
  55                 };
  56
  57                 usb {
  58                         label = "tplink:green:usb";
  59                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  60                         default-state = "off";
  61                         trigger-sources = <&hub_port>;
  62                         linux,default-trigger = "usbport";
  63                 };
  64         };
  65
  66         ath9k-leds {
  67                 compatible = "gpio-leds";
  68
  69                 wlan2g {
  70                         label = "tplink:green:wlan2g";
  71                         gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
  72                         default-state = "off";
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75
  76                 wlan5g {
  77                         label = "tplink:green:wlan5g";
  78                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  79                         default-state = "off";
  80                         linux,default-trigger = "phy0tpt";
  81                 };
  82
  83         };
  84
  85         rtl8367 {
  86                 compatible = "realtek,rtl8367";
  87                 gpio-sda = <&gpio 1 GPIO_ACTIVE_HIGH>;
  88                 gpio-sck = <&gpio 6 GPIO_ACTIVE_HIGH>;
  89                 realtek,extif0 = <1 0 1 1 1 1 1 1 2>;
  90
  91                 mdio-bus {
  92                         status = "okay";
  93
  94                         phy0: ethernet-phy@0 {
  95                                 reg = <0>;
  96                         };
  97                 };
  98         };
  99 };
 100
 101 &pll {
 102         clocks = <&extosc>;
 103 };
 104
 105 &spi {
 106         status = "okay";
 107         num-cs = <1>;
 108
 109         flash@0 {
 110                 #address-cells = <1>;
 111                 #size-cells = <1>;
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <25000000>;
 115
 116                 partitions {
 117                         compatible = "fixed-partitions";
 118                         #address-cells = <1>;
 119                         #size-cells = <1>;
 120
 121                         uboot:  partition@0 {
 122                                 label = "u-boot";
 123                                 reg = <0x000000 0x020000>;
 124                                 read-only;
 125                         };
 126
 127                         partition@20000 {
 128                                 label = "firmware";
 129                                 reg = <0x020000 0x7d0000>;
 130                         };
 131
 132                         partition@7f0000 {
 133                                 label = "art";
 134                                 reg = <0x7f0000 0x010000>;
 135                                 read-only;
 136                         };
 137                 };
 138         };
 139 };
 140
 141 &uart {
 142         status = "okay";
 143 };
 144
 145 &usb {
 146         status = "okay";
 147
 148         hub_port: port@1 {
 149                 reg = <1>;
 150                 #trigger-source-cells = <0>;
 151         };
 152 };
 153
 154 &usb_phy {
 155         status = "okay";
 156 };
 157
 158 &pcie {
 159         status = "okay";
 160
 161         ath9k: wifi@0 {
 162                 reg = <0x0000 0 0 0 0>;
 163                 #gpio-cells = <2>;
 164                 gpio-controller;
 165                 qca,no-eeprom;
 166                 mtd-mac-address = <&uboot 0x1fc00>;
 167         };
 168 };
 169
 170 &eth0 {
 171         status = "okay";
 172
 173         phy-mode = "rgmii";
 174         mtd-mac-address = <&uboot 0x1fc00>;
 175
 176         phy-handle = <&phy0>;
 177         fixed-link {
 178                 speed = <1000>;
 179                 full-duplex;
 180         };
 181 };