target/linux/ath79/dts/ar7242_buffalo_wzr-hp-g450h.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "buffalo,wzr-hp-g450h", "qca,ar7242";
  11         model = "Buffalo WZR-HP-G450H";
  12
  13         keys {
  14                 compatible = "gpio-keys-polled";
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 poll-interval = <20>;
  19                 usb {
  20                         linux,code = <BTN_2>;
  21                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  22                         debounce-interval = <60>;
  23                 };
  24
  25                 reset {
  26                         linux,code = <KEY_RESTART>;
  27                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  28                         debounce-interval = <60>;
  29                 };
  30
  31                 movie_engine {
  32                         linux,code = <KEY_RESTART>;
  33                         gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
  34                         debounce-interval = <60>;
  35                 };
  36
  37                 aoss {
  38                         linux,code = <KEY_WPS_BUTTON>;
  39                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  40                         debounce-interval = <60>;
  41                 };
  42
  43                 router_off {
  44                         linux,code = <BTN_5>;
  45                         gpios = <&gpio 12 GPIO_ACTIVE_HIGH>;
  46                         debounce-interval = <60>;
  47                 };
  48
  49         };
  50
  51         leds {
  52                 compatible = "gpio-leds";
  53                 security {
  54                         label = "buffalo:orange:security";
  55                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 diag {
  59                         label = "buffalo:red:diag";
  60                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         gpio-export {
  65                 compatible = "gpio-export";
  66                 #size-cells = <0>;
  67
  68                 gpio_usb_power {
  69                         gpio-export,name = "wzr-hp-g450h:usb-power";
  70                         gpio-export,output = <1>;
  71                         gpios = <&gpio 16 GPIO_ACTIVE_HIGH>;
  72                 };
  73         };
  74 };
  75
  76 &mdio0 {
  77         status = "okay";
  78         phy-mask = <0x1>;
  79
  80         phy0: ethernet-phy@0 {
  81                 reg = <0>;
  82                 phy-mode = "rgmii";
  83         };
  84 };
  85
  86 &eth0 {
  87         status = "okay";
  88
  89         phy-mode = "rgmii";
  90         pll-data = <0x62000000 0 0>;
  91
  92         fixed-link {
  93                 speed = <1000>;
  94                 full-duplex;
  95         };
  96 };
  97
  98 &uart {
  99         status = "okay";
 100 };
 101
 102 &usb_phy {
 103         status = "okay";
 104 };
 105
 106 &usb {
 107         status = "okay";
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112
 113         ath9k@0 {
 114                 reg = <0x0000 0 0 0 0>;
 115                 qca,no-eeprom;
 116         };
 117 };