target/linux/ath79/dts/ar7242_avm_fritz300e.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz300e", "qca,ar7242";
  11         model = "AVM FRITZ!WLAN Repeater 300E";
  12
  13         aliases {
  14                 led-status = &power;
  15         };
  16
  17         gpio-keys {
  18                 compatible = "gpio-keys-polled";
  19                 poll-interval = <20>;
  20
  21                 wps {
  22                         label = "wps";
  23                         linux,code = <KEY_WPS_BUTTON>;
  24                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  25                         debounce-interval = <60>;
  26                 };
  27         };
  28
  29         leds {
  30                 compatible = "gpio-leds";
  31
  32                 power: power {
  33                         label = "fritz300e:green:power";
  34                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  35                         default-state = "on";
  36                 };
  37
  38                 lan {
  39                         label = "fritz300e:green:lan";
  40                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  41                 };
  42
  43                 wlan {
  44                         label = "fritz300e:green:wlan";
  45                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  46                         linux,default-trigger = "phy0tpt";
  47                 };
  48         };
  49
  50         ath9k-leds {
  51                 compatible = "gpio-leds";
  52
  53                 rssi0 {
  54                         label = "fritz300e:green:rssi0";
  55                         gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 rssi1 {
  59                         label = "fritz300e:green:rssi1";
  60                         gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
  61                 };
  62
  63                 rssi2 {
  64                         label = "fritz300e:green:rssi2";
  65                         gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
  66                 };
  67
  68                 rssi3 {
  69                         label = "fritz300e:green:rssi3";
  70                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  71                 };
  72
  73                 rssi4 {
  74                         label = "fritz300e:green:rssi4";
  75                         gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
  76                 };
  77         };
  78
  79         eth-phy-reset {
  80                 compatible = "regulator-fixed";
  81
  82                 regulator-name = "eth-phy-reset";
  83                 regulator-min-microvolt = <3300000>;
  84                 regulator-max-microvolt = <3300000>;
  85
  86                 gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
  87                 startup-delay-us = <300000>;
  88                 enable-active-high;
  89
  90                 regulator-always-on;
  91         };
  92 };
  93
  94 &spi {
  95         status = "okay";
  96         num-cs = <1>;
  97
  98         flash@0 {
  99                 compatible = "jedec,spi-nor";
 100                 reg = <0>;
 101                 spi-max-frequency = <25000000>;
 102
 103                 partitions {
 104                         compatible = "fixed-partitions";
 105                         #address-cells = <1>;
 106                         #size-cells = <1>;
 107
 108                         partition@0 {
 109                                 reg = <0x0 0x20000>;
 110                                 label = "urloader";
 111                                 read-only;
 112                         };
 113
 114                         partition@20000 {
 115                                 reg = <0x20000 0xee0000>;
 116                                 label = "firmware";
 117                         };
 118
 119                         partition@f00000 {
 120                                 reg = <0xf00000 0x80000>;
 121                                 label = "tffs (1)";
 122                                 read-only;
 123                         };
 124
 125                         partition@f80000 {
 126                                 reg = <0xf80000 0x80000>;
 127                                 label = "tffs (2)";
 128                                 read-only;
 129                         };
 130                 };
 131         };
 132 };
 133
 134 &uart {
 135         status = "okay";
 136 };
 137
 138 &pcie {
 139         status = "okay";
 140
 141         ath9k: wifi@0,0 {
 142                 reg = <0x0000 0 0 0 0>;
 143                 #gpio-cells = <2>;
 144                 gpio-controller;
 145                 qca,no-eeprom;
 146         };
 147 };
 148
 149 &mdio0 {
 150         status = "okay";
 151
 152         phy0: ethernet-phy@0 {
 153                 reg = <0>;
 154                 phy-mode = "rgmii";
 155         };
 156 };
 157
 158 &eth0 {
 159         status = "okay";
 160
 161         phy-mode = "rgmii";
 162         phy-handle = <&phy0>;
 163
 164         pll-data = <0x16000000 0x00000101 0x00001313>;
 165 };