target/linux/ath79/dts/ar7242_avm_fritz300e.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7242.dtsi"
   8
   9 / {
  10         compatible = "avm,fritz300e", "qca,ar7242";
  11         model = "AVM FRITZ!WLAN Repeater 300E";
  12
  13         aliases {
  14                 led-status = &power;
  15         };
  16
  17         gpio-keys {
  18                 compatible = "gpio-keys-polled";
  19                 #address-cells = <1>;
  20                 #size-cells = <0>;
  21                 poll-interval = <20>;
  22
  23                 wps {
  24                         label = "wps";
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  27                         debounce-interval = <60>;
  28                 };
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33
  34                 power: power {
  35                         label = "fritz300e:green:power";
  36                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  37                         default-state = "on";
  38                 };
  39
  40                 lan {
  41                         label = "fritz300e:green:lan";
  42                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wlan {
  46                         label = "fritz300e:green:wlan";
  47                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  48                         linux,default-trigger = "phy0tpt";
  49                 };
  50         };
  51
  52         ath9k-leds {
  53                 compatible = "gpio-leds";
  54
  55                 rssi0 {
  56                         label = "fritz300e:green:rssi0";
  57                         gpios = <&ath9k 10 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 rssi1 {
  61                         label = "fritz300e:green:rssi1";
  62                         gpios = <&ath9k 4 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 rssi2 {
  66                         label = "fritz300e:green:rssi2";
  67                         gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 rssi3 {
  71                         label = "fritz300e:green:rssi3";
  72                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 rssi4 {
  76                         label = "fritz300e:green:rssi4";
  77                         gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         eth-phy-reset {
  82                 compatible = "regulator-fixed";
  83
  84                 regulator-name = "eth-phy-reset";
  85                 regulator-min-microvolt = <3300000>;
  86                 regulator-max-microvolt = <3300000>;
  87
  88                 gpio = <&gpio 11 GPIO_ACTIVE_LOW>;
  89                 startup-delay-us = <300000>;
  90                 enable-active-high;
  91
  92                 regulator-always-on;
  93         };
  94 };
  95
  96 &spi {
  97         status = "okay";
  98         num-cs = <1>;
  99
 100         flash@0 {
 101                 #address-cells = <1>;
 102                 #size-cells = <1>;
 103                 compatible = "jedec,spi-nor";
 104                 reg = <0>;
 105                 spi-max-frequency = <25000000>;
 106
 107                 partitions {
 108                         compatible = "fixed-partitions";
 109                         #address-cells = <1>;
 110                         #size-cells = <1>;
 111
 112                         partition@0 {
 113                                 reg = <0x0 0x20000>;
 114                                 label = "urloader";
 115                                 read-only;
 116                         };
 117
 118                         partition@20000 {
 119                                 reg = <0x20000 0xee0000>;
 120                                 label = "firmware";
 121                         };
 122
 123                         partition@f00000 {
 124                                 reg = <0xf00000 0x80000>;
 125                                 label = "tffs (1)";
 126                                 read-only;
 127                         };
 128
 129                         partition@f80000 {
 130                                 reg = <0xf80000 0x80000>;
 131                                 label = "tffs (2)";
 132                                 read-only;
 133                         };
 134                 };
 135         };
 136 };
 137
 138 &uart {
 139         status = "okay";
 140 };
 141
 142 &pcie {
 143         status = "okay";
 144
 145         ath9k: wifi@0 {
 146                 reg = <0x0000 0 0 0 0>;
 147                 #gpio-cells = <2>;
 148                 gpio-controller;
 149                 qca,no-eeprom;
 150         };
 151 };
 152
 153 &mdio0 {
 154         status = "okay";
 155
 156         phy0: ethernet-phy@0 {
 157                 reg = <0>;
 158                 phy-mode = "rgmii";
 159         };
 160 };
 161
 162 &eth0 {
 163         status = "okay";
 164
 165         phy-mode = "rgmii";
 166         phy-handle = <&phy0>;
 167
 168         pll-data = <0x16000000 0x00000101 0x00001313>;
 169 };