target/linux/ath79/dts/ar7241_ubnt_xm.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "ar7241.dtsi"
   7
   8 / {
   9         compatible = "ubnt,xm", "qca,ar7241";
  10         model = "Ubiquiti Networks XM (rev 1.0) board";
  11
  12 /*      extosc: ref {
  13                 compatible = "fixed-clock";
  14                 #clock-cells = <0>;
  15                 clock-frequency = <40000000>;
  16         };
  17 */
  18         keys {
  19                 compatible = "gpio-keys-polled";
  20                 poll-interval = <20>;
  21                 reset {
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  24                         debounce-interval = <60>;
  25                 };
  26         };
  27 };
  28
  29 &uart {
  30         status = "okay";
  31 };
  32
  33 /*&pll {
  34         clocks = <&extosc>;
  35 };*/
  36
  37 &spi {
  38         status = "okay";
  39         num-cs = <1>;
  40
  41         flash@0 {
  42                 compatible = "jedec,spi-nor";
  43                 reg = <0>;
  44                 spi-max-frequency = <25000000>;
  45
  46                 partitions {
  47                         compatible = "fixed-partitions";
  48                         #address-cells = <1>;
  49                         #size-cells = <1>;
  50
  51                         partition@0 {
  52                                 label = "u-boot";
  53                                 reg = <0x000000 0x040000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@1 {
  58                                 label = "u-boot-env";
  59                                 reg = <0x040000 0x010000>;
  60                         };
  61
  62                         partition@2 {
  63                                 compatible = "denx,uimage";
  64                                 label = "firmware";
  65                                 reg = <0x050000 0x750000>;
  66                         };
  67
  68                         partition@3 {
  69                                 label = "board_config";
  70                                 reg = <0x7a0000 0x010000>;
  71                                 read-only;
  72                         };
  73
  74                         partition@4 {
  75                                 label = "cfg";
  76                                 reg = <0x7b0000 0x040000>;
  77                                 read-only;
  78                         };
  79
  80                         art: partition@5 {
  81                                 label = "art";
  82                                 reg = <0x7f0000 0x010000>;
  83                                 read-only;
  84                         };
  85                 };
  86         };
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91
  92         wifi@0,0 {
  93                 reg = <0x0000 0 0 0 0>;
  94                 qca,no-eeprom;
  95         };
  96 };
  97
  98 &eth0 {
  99         status = "okay";
 100
 101         mtd-mac-address = <&art 0x0>;
 102 };
 103
 104 &eth1 {
 105         status = "okay";
 106
 107         mtd-mac-address = <&art 0x6>;
 108 };