target/linux/ath79/dts/ar7241_ubnt_unifi.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7241.dtsi"
   8
   9 / {
  10         compatible = "ubnt,unifi", "qca,ar7241";
  11         model = "Ubiquiti UniFi AP";
  12
  13         aliases {
  14                 led-boot = &dome_green;
  15                 led-failsafe = &dome_green;
  16                 led-running = &dome_green;
  17                 led-upgrade = &dome_green;
  18         };
  19
  20         extosc: ref {
  21                 compatible = "fixed-clock";
  22                 #clock-cells = <0>;
  23                 clock-frequency = <40000000>;
  24         };
  25
  26         keys {
  27                 compatible = "gpio-keys-polled";
  28                 poll-interval = <20>;
  29                 reset {
  30                         linux,code = <KEY_RESTART>;
  31                         gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  32                         debounce-interval = <60>;
  33                 };
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38                 dome_green: dome-green {
  39                         label = "ubnt:green:dome";
  40                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  41                 };
  42
  43                 dome-orange {
  44                         label = "ubnt:orange:dome";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  46                 };
  47         };
  48 };
  49
  50 &uart {
  51         status = "okay";
  52 };
  53
  54 &pll {
  55         clocks = <&extosc>;
  56 };
  57
  58 &spi {
  59         status = "okay";
  60         num-cs = <1>;
  61
  62         flash@0 {
  63                 compatible = "jedec,spi-nor";
  64                 reg = <0>;
  65                 spi-max-frequency = <25000000>;
  66
  67                 partitions {
  68                         compatible = "fixed-partitions";
  69                         #address-cells = <1>;
  70                         #size-cells = <1>;
  71
  72                         partition@0 {
  73                                 label = "u-boot";
  74                                 reg = <0x000000 0x040000>;
  75                                 read-only;
  76                         };
  77
  78                         partition@1 {
  79                                 label = "u-boot-env";
  80                                 reg = <0x040000 0x010000>;
  81                         };
  82
  83                         partition@2 {
  84                                 compatible = "denx,uimage";
  85                                 label = "firmware";
  86                                 reg = <0x050000 0x750000>;
  87                         };
  88
  89                         partition@3 {
  90                                 label = "board_config";
  91                                 reg = <0x7a0000 0x010000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@4 {
  96                                 label = "cfg";
  97                                 reg = <0x7b0000 0x040000>;
  98                                 read-only;
  99                         };
 100
 101                         art: partition@5 {
 102                                 label = "art";
 103                                 reg = <0x7f0000 0x010000>;
 104                                 read-only;
 105                         };
 106                 };
 107         };
 108 };
 109
 110 &pcie {
 111         status = "okay";
 112
 113         wifi@0,0 {
 114                 reg = <0x0000 0 0 0 0>;
 115                 qca,no-eeprom;
 116         };
 117 };
 118
 119 &eth0 {
 120         status = "okay";
 121
 122         mtd-mac-address = <&art 0x0>;
 123 };
 124
 125 &eth1 {
 126         status = "okay";
 127
 128         compatible = "syscon", "simple-mfd";
 129 };