1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
3 #include <dt-bindings/gpio/gpio.h>
4 #include <dt-bindings/input/input.h>
10 bootargs = "console=ttyS0,115200n8";
14 led-boot = &led_power_amber;
15 led-failsafe = &led_power_amber;
16 led-running = &led_power_green;
17 led-upgrade = &led_power_amber;
18 label-mac-device = ð1;
22 compatible = "gpio-keys-polled";
27 linux,code = <KEY_WPS_BUTTON>;
28 gpios = <&ath9k 5 GPIO_ACTIVE_LOW>;
29 debounce-interval = <60>;
34 linux,code = <KEY_RESTART>;
35 gpios = <&ath9k 6 GPIO_ACTIVE_LOW>;
36 debounce-interval = <60>;
41 linux,code = <KEY_RFKILL>;
42 gpios = <&ath9k 3 GPIO_ACTIVE_LOW>;
43 debounce-interval = <60>;
48 compatible = "gpio-leds";
50 pinctrl-names = "default";
51 pinctrl-0 = <&jtag_disable_pins &switch_led_disable_pins &clks_disable_pins>;
54 label = "netgear:green:wan";
55 gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
59 label = "netgear:amber:wan";
60 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
64 label = "netgear:green:lan1";
65 gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
69 label = "netgear:amber:lan1";
70 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
74 label = "netgear:green:lan2";
75 gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
79 label = "netgear:amber:lan2";
80 gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
84 label = "netgear:green:lan3";
85 gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
89 label = "netgear:amber:lan3";
90 gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
94 label = "netgear:green:lan4";
95 gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
99 label = "netgear:amber:lan4";
100 gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
104 label = "netgear:green:wps";
105 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
109 label = "netgear:green:usb";
110 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
111 trigger-sources = <&hub_port>;
112 linux,default-trigger = "usbport";
117 compatible = "gpio-leds";
119 led_power_green: power_green {
120 label = "netgear:green:power";
121 gpios = <&ath9k 2 GPIO_ACTIVE_LOW>;
124 led_power_amber: power_amber {
125 label = "netgear:amber:power";
126 gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
127 default-state = "keep";
131 label = "netgear:blue:wlan";
132 gpios = <&ath9k 0 GPIO_ACTIVE_LOW>;
133 linux,default-trigger = "phy0tpt";
143 compatible = "jedec,spi-nor";
145 spi-max-frequency = <25000000>;
147 partitions: partitions {
148 compatible = "fixed-partitions";
149 #address-cells = <1>;
158 mtd-mac-address = <&art 0x0>;
164 compatible = "qca,ar7241-eth", "syscon", "simple-mfd";
165 mtd-mac-address = <&art 0x6>;
172 compatible = "pci168c,002e";
173 reg = <0x0000 0 0 0 0>;
174 mtd-mac-address = <&art 0x0>;
175 mtd-mac-address-increment = <1>;
182 line-name = "netgear:power:usb";
183 gpios = <4 GPIO_ACTIVE_HIGH>;
198 #address-cells = <1>;
204 #trigger-source-cells = <0>;