target/linux/ath79/dts/ar7240_netgear_wnr612-v2.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7240.dtsi"
   8
   9 / {
  10         compatible = "netgear,wnr612-v2", "qca,ar7240";
  11         model = "Netgear WNR612 V2";
  12
  13         aliases {
  14                 led-status = &led_power;
  15         };
  16
  17         gpio-keys-polled {
  18                 compatible = "gpio-keys-polled";
  19                 poll-interval = <20>;
  20
  21                 reset {
  22                         label = "reset";
  23                         linux,code = <KEY_RESTART>;
  24                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
  25                         debounce-interval = <60>;
  26                 };
  27         };
  28
  29         gpio-leds {
  30                 compatible = "gpio-leds";
  31                 led_power: power {
  32                         label = "netgear:green:power";
  33                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  34                 };
  35
  36                 lan1 {
  37                         label = "netgear:green:lan1";
  38                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  39                 };
  40
  41                 lan2 {
  42                         label = "netgear:green:lan2";
  43                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  44                 };
  45
  46                 wan {
  47                         label = "netgear:green:wan";
  48                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 wlan: wlan {
  52                         label = "netgear:green:wlan";
  53                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
  54                         default-state = "off";
  55                         linux,default-trigger = "phy0tpt";
  56                 };
  57         };
  58 };
  59
  60 &spi {
  61         status = "okay";
  62         num-cs = <1>;
  63
  64         flash@0 {
  65                 compatible = "jedec,spi-nor";
  66                 reg = <0>;
  67                 spi-max-frequency = <25000000>;
  68
  69                 partitions {
  70                         compatible = "fixed-partitions";
  71                         #address-cells = <1>;
  72                         #size-cells = <1>;
  73
  74                         uboot: partition@0 {
  75                                 reg = <0x0 0x40000>;
  76                                 label = "u-boot";
  77                                 read-only;
  78                         };
  79
  80                         partition@40000 {
  81                                 reg = <0x40000 0x10000>;
  82                                 label = "u-boot-env";
  83                         };
  84
  85                         partition@50000 {
  86                                 reg = <0x50000 0x3a0000>;
  87                                 label = "firmware";
  88                         };
  89
  90                         partition@3f0000 {
  91                                 reg = <0x3f0000 0x10000>;
  92                                 label = "art";
  93                                 read-only;
  94                         };
  95                 };
  96         };
  97 };
  98
  99 &eth0 {
 100         status = "okay";
 101
 102         mtd-mac-address = <&uboot 0x1fc00>;
 103         mtd-mac-address-increment = <(-1)>;
 104 };
 105
 106 &eth1 {
 107         status = "okay";
 108
 109         mtd-mac-address = <&uboot 0x1fc00>;
 110         mtd-mac-address-increment = <1>;
 111 };
 112
 113 &pcie {
 114         status = "okay";
 115
 116         ath9k: wifi@0,0 {
 117                 compatible = "pci168c,002b";
 118                 reg = <0x0000 0 0 0 0>;
 119                 qca,no-eeprom;
 120                 #gpio-cells = <2>;
 121                 gpio-controller;
 122         };
 123 };
 124
 125 &uart {
 126         status = "okay";
 127 };