ath79: add support for COMFAST CF-E120A v3
[oweals/openwrt.git] / target / linux / ath79 / dts / ar7240_netgear_wnr612-v2.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "ar7240.dtsi"
8
9 / {
10         aliases {
11                 led-boot = &power;
12                 led-failsafe = &power;
13                 led-running = &power;
14                 led-upgrade = &power;
15         };
16
17         keys {
18                 compatible = "gpio-keys-polled";
19                 poll-interval = <20>;
20
21                 reset {
22                         label = "reset";
23                         linux,code = <KEY_RESTART>;
24                         gpios = <&ath9k 7 GPIO_ACTIVE_LOW>;
25                         debounce-interval = <60>;
26                 };
27         };
28
29         leds {
30                 compatible = "gpio-leds";
31                 power: power {
32                         label = "netgear:green:power";
33                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
34                 };
35
36                 lan1 {
37                         label = "netgear:green:lan1";
38                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
39                 };
40
41                 lan2 {
42                         label = "netgear:green:lan2";
43                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
44                 };
45
46                 wan {
47                         label = "netgear:green:wan";
48                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
49                 };
50
51                 wlan: wlan {
52                         label = "netgear:green:wlan";
53                         gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
54                         linux,default-trigger = "phy0tpt";
55                 };
56         };
57 };
58
59 &spi {
60         status = "okay";
61         num-cs = <1>;
62
63         flash@0 {
64                 compatible = "jedec,spi-nor";
65                 reg = <0>;
66                 spi-max-frequency = <25000000>;
67
68                 partitions {
69                         compatible = "fixed-partitions";
70                         #address-cells = <1>;
71                         #size-cells = <1>;
72
73                         uboot: partition@0 {
74                                 reg = <0x0 0x40000>;
75                                 label = "u-boot";
76                                 read-only;
77                         };
78
79                         partition@40000 {
80                                 reg = <0x40000 0x10000>;
81                                 label = "u-boot-env";
82                         };
83
84                         partition@50000 {
85                                 compatible = "netgear,uimage";
86                                 reg = <0x50000 0x3a0000>;
87                                 label = "firmware";
88                         };
89
90                         partition@3f0000 {
91                                 reg = <0x3f0000 0x10000>;
92                                 label = "art";
93                                 read-only;
94                         };
95                 };
96         };
97 };
98
99 &eth0 {
100         status = "okay";
101
102         mtd-mac-address = <&uboot 0x1fc00>;
103         mtd-mac-address-increment = <(-1)>;
104 };
105
106 &eth1 {
107         status = "okay";
108
109         mtd-mac-address = <&uboot 0x1fc00>;
110         mtd-mac-address-increment = <1>;
111 };
112
113 &pcie {
114         status = "okay";
115
116         ath9k: wifi@0,0 {
117                 compatible = "pci168c,002b";
118                 reg = <0x0000 0 0 0 0>;
119                 qca,no-eeprom;
120                 #gpio-cells = <2>;
121                 gpio-controller;
122         };
123 };
124
125 &uart {
126         status = "okay";
127 };