target/linux/ath79/dts/ar7161_netgear_wndr3800.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "netgear,wndr3800", "qca,ar7161";
  11         model = "Netgear WNDR3800";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x8000000>;
  16         };
  17
  18         extosc: ref {
  19                 compatible = "fixed-clock";
  20                 #clock-cells = <0>;
  21                 clock-output-names = "ref";
  22                 clock-frequency = <40000000>;
  23         };
  24
  25         reset-leds {
  26                 compatible = "reset-leds";
  27
  28                 wps {
  29                         label = "netgear:green:usb";
  30                         resets = <&rst 12>;
  31                 };
  32         };
  33
  34         gpio-leds {
  35                 compatible = "gpio-leds";
  36
  37                 wps {
  38                         label = "netgear:orange:wps";
  39                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  40                         default-state = "off";
  41                 };
  42
  43                 power_green {
  44                         label = "netgear:green:power";
  45                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  46                         default-state = "off";
  47                 };
  48
  49                 power_orange {
  50                         label = "netgear:orange:power";
  51                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  52                         default-state = "off";
  53                 };
  54
  55                 wps_green {
  56                         label = "netgear:green:wps";
  57                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  58                         default-state = "off";
  59                 };
  60
  61                 wan_green {
  62                         label = "netgear:green:wan";
  63                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  64                         default-state = "off";
  65                 };
  66         };
  67
  68         gpio-keys-polled {
  69                 compatible = "gpio-keys-polled";
  70                 #address-cells = <1>;
  71                 #size-cells = <0>;
  72                 poll-interval = <100>;
  73
  74                 button@0 {
  75                         label = "wps";
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 button@1 {
  81                         label = "reset";
  82                         linux,code = <KEY_RESTART>;
  83                         gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 button@2 {
  87                         label = "wifi";
  88                         linux,code = <BTN_2>;
  89                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         rtl8366s {
  94                 compatible = "realtek,rtl8366s";
  95                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
  96                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
  97
  98                 mdio-bus {
  99                         status = "okay";
 100
 101                         phy-mask = <0x10>;
 102
 103                         phy4: ethernet-phy@4 {
 104                                 reg = <4>;
 105                                 phy-mode = "rgmii";
 106                         };
 107                 };
 108         };
 109 };
 110
 111 &usb_phy {
 112         status = "okay";
 113 };
 114
 115 &usb1 {
 116         status = "okay";
 117 };
 118
 119 &usb2 {
 120         status = "okay";
 121 };
 122
 123 &pcie0 {
 124         status = "okay";
 125 };
 126
 127 &uart {
 128         status = "okay";
 129 };
 130
 131 &spi {
 132         status = "okay";
 133         num-cs = <1>;
 134
 135         flash@0 {
 136                 #address-cells = <1>;
 137                 #size-cells = <1>;
 138                 compatible = "mx25l12805d";
 139                 reg = <0>;
 140                 spi-max-frequency = <25000000>;
 141
 142                 partition@0 {
 143                         label = "u-boot";
 144                         reg = <0x000000 0x050000>;
 145                         read-only;
 146                 };
 147
 148                 partition@1 {
 149                         label = "u-boot-env";
 150                         reg = <0x050000 0x020000>;
 151                 };
 152
 153                 partition@2 {
 154                         label = "firmware";
 155                         reg = <0x70000 0xf80000>;
 156                 };
 157
 158                 partition@3 {
 159                         label = "art";
 160                         reg = <0xff0000 0x010000>;
 161                         read-only;
 162                 };
 163         };
 164 };
 165
 166 &eth0 {
 167         status = "okay";
 168
 169         pll-data = <0x11110000 0x00001099 0x00991099>;
 170
 171         fixed-link {
 172                 speed = <1000>;
 173                 full-duplex;
 174         };
 175 };
 176
 177 &eth1 {
 178         status = "okay";
 179
 180         pll-data = <0x11110000 0x00001099 0x00991099>;
 181
 182         resets = <&rst 13>;
 183         reset-names = "mac";
 184
 185         phy-handle = <&phy4>;
 186 };