target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         aliases {
  11                 led-status = &power_green;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200";
  16         };
  17
  18         extosc: ref {
  19                 compatible = "fixed-clock";
  20                 #clock-cells = <0>;
  21                 clock-output-names = "ref";
  22                 clock-frequency = <40000000>;
  23         };
  24
  25         reset-leds {
  26                 compatible = "reset-leds";
  27
  28                 usb_led {
  29                         label = "netgear:green:usb";
  30                         resets = <&rst 12>;
  31                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38
  39                 wps {
  40                         label = "netgear:orange:wps";
  41                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  42                         default-state = "off";
  43                 };
  44
  45                 power_green: power_green {
  46                         label = "netgear:green:power";
  47                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  48                         default-state = "off";
  49                 };
  50
  51                 power_orange {
  52                         label = "netgear:orange:power";
  53                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  54                         default-state = "off";
  55                 };
  56
  57                 wps_green {
  58                         label = "netgear:green:wps";
  59                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  60                         default-state = "off";
  61                 };
  62
  63                 wan_green {
  64                         label = "netgear:green:wan";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                         default-state = "off";
  67                 };
  68         };
  69
  70         gpio-keys-polled {
  71                 compatible = "gpio-keys-polled";
  72                 poll-interval = <100>;
  73
  74                 wps {
  75                         label = "wps";
  76                         linux,code = <KEY_WPS_BUTTON>;
  77                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  78                 };
  79
  80                 reset {
  81                         label = "reset";
  82                         linux,code = <KEY_RESTART>;
  83                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  84                 };
  85
  86                 rfkill {
  87                         label = "rfkill";
  88                         linux,code = <KEY_RFKILL>;
  89                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  90                 };
  91         };
  92
  93         rtl8366s {
  94                 compatible = "realtek,rtl8366s";
  95                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
  96                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
  97
  98                 mdio-bus {
  99                         #address-cells = <1>;
 100                         #size-cells = <0>;
 101                         status = "okay";
 102
 103                         phy-mask = <0x10>;
 104
 105                         phy4: ethernet-phy@4 {
 106                                 reg = <4>;
 107                                 phy-mode = "rgmii";
 108                         };
 109                 };
 110         };
 111 };
 112
 113 &usb_phy {
 114         status = "okay";
 115 };
 116
 117 &usb1 {
 118         #address-cells = <1>;
 119         #size-cells = <0>;
 120         status = "okay";
 121
 122         usb_ochi_port: port@1 {
 123                 reg = <1>;
 124                 #trigger-source-cells = <0>;
 125         };
 126 };
 127
 128 &usb2 {
 129         #address-cells = <1>;
 130         #size-cells = <0>;
 131         status = "okay";
 132
 133         usb_echi_port: port@1 {
 134                 reg = <1>;
 135                 #trigger-source-cells = <0>;
 136         };
 137 };
 138
 139 &pcie0 {
 140         status = "okay";
 141 };
 142
 143 &uart {
 144         status = "okay";
 145 };
 146
 147 &spi {
 148         status = "okay";
 149         num-cs = <1>;
 150
 151         flash@0 {
 152                 compatible = "jedec,spi-nor";
 153                 reg = <0>;
 154                 spi-max-frequency = <25000000>;
 155
 156                 partitions: partitions {
 157                         compatible = "fixed-partitions";
 158                         #address-cells = <1>;
 159                         #size-cells = <1>;
 160                 };
 161         };
 162 };
 163
 164 &eth0 {
 165         status = "okay";
 166
 167         pll-data = <0x11110000 0x00001099 0x00991099>;
 168
 169         mtd-mac-address = <&art 0x00>;
 170
 171         fixed-link {
 172                 speed = <1000>;
 173                 full-duplex;
 174         };
 175 };
 176
 177 &eth1 {
 178         status = "okay";
 179
 180         pll-data = <0x11110000 0x00001099 0x00991099>;
 181
 182         mtd-mac-address = <&art 0x06>;
 183
 184         phy-handle = <&phy4>;
 185 };