target/linux/ath79/dts/ar7161_netgear_wndr3700.dtsi

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         aliases {
  11                 led-status = &power_green;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,115200";
  16         };
  17
  18         extosc: ref {
  19                 compatible = "fixed-clock";
  20                 #clock-cells = <0>;
  21                 clock-output-names = "ref";
  22                 clock-frequency = <40000000>;
  23         };
  24
  25         reset-leds {
  26                 compatible = "reset-leds";
  27
  28                 usb_led {
  29                         label = "netgear:green:usb";
  30                         resets = <&rst 12>;
  31                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  32                         linux,default-trigger = "usbport";
  33                 };
  34         };
  35
  36         gpio-leds {
  37                 compatible = "gpio-leds";
  38
  39                 wps {
  40                         label = "netgear:orange:wps";
  41                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  42                         default-state = "off";
  43                 };
  44
  45                 power_green: power_green {
  46                         label = "netgear:green:power";
  47                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  48                         default-state = "off";
  49                 };
  50
  51                 power_orange {
  52                         label = "netgear:orange:power";
  53                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  54                         default-state = "off";
  55                 };
  56
  57                 wps_green {
  58                         label = "netgear:green:wps";
  59                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  60                         default-state = "off";
  61                 };
  62
  63                 wan_green {
  64                         label = "netgear:green:wan";
  65                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  66                         default-state = "off";
  67                 };
  68         };
  69
  70         ath9k-leds {
  71                 compatible = "gpio-leds";
  72                 wlan2g {
  73                         label = "netgear:green:wlan2g";
  74                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  75                         default-state = "off";
  76                         linux,default-trigger = "phy0tpt";
  77                 };
  78                 wlan5g {
  79                         label = "netgear:blue:wlan5g";
  80                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  81                         default-state = "off";
  82                         linux,default-trigger = "phy1tpt";
  83                 };
  84         };
  85
  86         gpio-keys-polled {
  87                 compatible = "gpio-keys-polled";
  88                 poll-interval = <100>;
  89
  90                 wps {
  91                         label = "wps";
  92                         linux,code = <KEY_WPS_BUTTON>;
  93                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  94                 };
  95
  96                 reset {
  97                         label = "reset";
  98                         linux,code = <KEY_RESTART>;
  99                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 100                 };
 101
 102                 rfkill {
 103                         label = "rfkill";
 104                         linux,code = <KEY_RFKILL>;
 105                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
 106                 };
 107         };
 108
 109         rtl8366s {
 110                 compatible = "realtek,rtl8366s";
 111                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 112                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 113
 114                 mdio-bus {
 115                         #address-cells = <1>;
 116                         #size-cells = <0>;
 117                         status = "okay";
 118
 119                         phy-mask = <0x10>;
 120
 121                         phy4: ethernet-phy@4 {
 122                                 reg = <4>;
 123                                 phy-mode = "rgmii";
 124                         };
 125                 };
 126         };
 127 };
 128
 129 &usb_phy {
 130         status = "okay";
 131 };
 132
 133 &usb1 {
 134         #address-cells = <1>;
 135         #size-cells = <0>;
 136         status = "okay";
 137
 138         usb_ochi_port: port@1 {
 139                 reg = <1>;
 140                 #trigger-source-cells = <0>;
 141         };
 142 };
 143
 144 &usb2 {
 145         #address-cells = <1>;
 146         #size-cells = <0>;
 147         status = "okay";
 148
 149         usb_echi_port: port@1 {
 150                 reg = <1>;
 151                 #trigger-source-cells = <0>;
 152         };
 153 };
 154
 155 &pcie0 {
 156         status = "okay";
 157
 158         ath9k0: wifi@0,11 {
 159                 compatible = "pci168c,0029";
 160                 reg = <0x8800 0 0 0 0x10000>;
 161                 mtd-mac-address = <&art 0x0>;
 162                 qca,no-eeprom;
 163                 #gpio-cells = <2>;
 164                 gpio-controller;
 165         };
 166
 167         ath9k1: wifi@0,12 {
 168                 compatible = "pci168c,0029";
 169                 reg = <0x9000 0 0 0 0x10000>;
 170                 mtd-mac-address = <&art 0xc>;
 171                 qca,no-eeprom;
 172                 #gpio-cells = <2>;
 173                 gpio-controller;
 174         };
 175 };
 176
 177 &uart {
 178         status = "okay";
 179 };
 180
 181 &spi {
 182         status = "okay";
 183         num-cs = <1>;
 184
 185         flash@0 {
 186                 compatible = "jedec,spi-nor";
 187                 reg = <0>;
 188                 spi-max-frequency = <25000000>;
 189
 190                 partitions: partitions {
 191                         compatible = "fixed-partitions";
 192                         #address-cells = <1>;
 193                         #size-cells = <1>;
 194                 };
 195         };
 196 };
 197
 198 &eth0 {
 199         status = "okay";
 200
 201         pll-data = <0x11110000 0x00001099 0x00991099>;
 202
 203         mtd-mac-address = <&art 0x00>;
 204
 205         fixed-link {
 206                 speed = <1000>;
 207                 full-duplex;
 208         };
 209 };
 210
 211 &eth1 {
 212         status = "okay";
 213
 214         pll-data = <0x11110000 0x00001099 0x00991099>;
 215
 216         mtd-mac-address = <&art 0x06>;
 217
 218         phy-handle = <&phy4>;
 219 };