ath79: Fix GL-AR300M USB trigger
[oweals/openwrt.git] / target / linux / ath79 / dts / ar7161_netgear_wndr3700.dtsi
1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
2 /dts-v1/;
3
4 #include <dt-bindings/gpio/gpio.h>
5 #include <dt-bindings/input/input.h>
6
7 #include "ar7100.dtsi"
8
9 / {
10         aliases {
11                 led-boot = &power_orange;
12                 led-failsafe = &power_orange;
13                 led-running = &power_green;
14                 led-upgrade = &power_orange;
15         };
16
17         chosen {
18                 bootargs = "console=ttyS0,115200";
19         };
20
21         extosc: ref {
22                 compatible = "fixed-clock";
23                 #clock-cells = <0>;
24                 clock-output-names = "ref";
25                 clock-frequency = <40000000>;
26         };
27
28         reset-leds {
29                 compatible = "reset-leds";
30
31                 usb_led {
32                         label = "netgear:green:usb";
33                         resets = <&rst 12>;
34                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
35                         linux,default-trigger = "usbport";
36                 };
37         };
38
39         gpio-leds {
40                 compatible = "gpio-leds";
41
42                 wps {
43                         label = "netgear:orange:wps";
44                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
45                         default-state = "off";
46                 };
47
48                 power_green: power_green {
49                         label = "netgear:green:power";
50                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
51                         default-state = "off";
52                 };
53
54                 power_orange: power_orange {
55                         label = "netgear:orange:power";
56                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
57                         default-state = "on";
58                 };
59
60                 wps_green {
61                         label = "netgear:green:wps";
62                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
63                         default-state = "off";
64                 };
65
66                 wan_green {
67                         label = "netgear:green:wan";
68                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69                         default-state = "off";
70                 };
71         };
72
73         ath9k-leds {
74                 compatible = "gpio-leds";
75                 wlan2g {
76                         label = "netgear:green:wlan2g";
77                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
78                         default-state = "off";
79                         linux,default-trigger = "phy0tpt";
80                 };
81                 wlan5g {
82                         label = "netgear:blue:wlan5g";
83                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
84                         default-state = "off";
85                         linux,default-trigger = "phy1tpt";
86                 };
87         };
88
89         gpio-keys-polled {
90                 compatible = "gpio-keys-polled";
91                 poll-interval = <100>;
92
93                 wps {
94                         label = "wps";
95                         linux,code = <KEY_WPS_BUTTON>;
96                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
97                 };
98
99                 reset {
100                         label = "reset";
101                         linux,code = <KEY_RESTART>;
102                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
103                 };
104
105                 rfkill {
106                         label = "rfkill";
107                         linux,code = <KEY_RFKILL>;
108                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
109                 };
110         };
111
112         rtl8366s {
113                 compatible = "realtek,rtl8366s";
114                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
115                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
116
117                 mdio-bus {
118                         #address-cells = <1>;
119                         #size-cells = <0>;
120                         status = "okay";
121
122                         phy-mask = <0x10>;
123
124                         phy4: ethernet-phy@4 {
125                                 reg = <4>;
126                                 phy-mode = "rgmii";
127                         };
128                 };
129         };
130 };
131
132 &usb_phy {
133         status = "okay";
134 };
135
136 &usb1 {
137         #address-cells = <1>;
138         #size-cells = <0>;
139         status = "okay";
140
141         usb_ochi_port: port@1 {
142                 reg = <1>;
143                 #trigger-source-cells = <0>;
144         };
145 };
146
147 &usb2 {
148         #address-cells = <1>;
149         #size-cells = <0>;
150         status = "okay";
151
152         usb_echi_port: port@1 {
153                 reg = <1>;
154                 #trigger-source-cells = <0>;
155         };
156 };
157
158 &pcie0 {
159         status = "okay";
160
161         ath9k0: wifi@0,11 {
162                 compatible = "pci168c,0029";
163                 reg = <0x8800 0 0 0 0x10000>;
164                 mtd-mac-address = <&art 0x0>;
165                 qca,no-eeprom;
166                 #gpio-cells = <2>;
167                 gpio-controller;
168         };
169
170         ath9k1: wifi@0,12 {
171                 compatible = "pci168c,0029";
172                 reg = <0x9000 0 0 0 0x10000>;
173                 mtd-mac-address = <&art 0xc>;
174                 qca,no-eeprom;
175                 #gpio-cells = <2>;
176                 gpio-controller;
177         };
178 };
179
180 &uart {
181         status = "okay";
182 };
183
184 &spi {
185         status = "okay";
186         num-cs = <1>;
187
188         flash@0 {
189                 compatible = "jedec,spi-nor";
190                 reg = <0>;
191                 spi-max-frequency = <25000000>;
192
193                 partitions: partitions {
194                         compatible = "fixed-partitions";
195                         #address-cells = <1>;
196                         #size-cells = <1>;
197                 };
198         };
199 };
200
201 &eth0 {
202         status = "okay";
203
204         pll-data = <0x11110000 0x00001099 0x00991099>;
205
206         mtd-mac-address = <&art 0x00>;
207
208         fixed-link {
209                 speed = <1000>;
210                 full-duplex;
211         };
212 };
213
214 &eth1 {
215         status = "okay";
216
217         pll-data = <0x11110000 0x00001099 0x00991099>;
218
219         mtd-mac-address = <&art 0x06>;
220
221         phy-handle = <&phy4>;
222 };