target/linux/ath79/dts/ar7161_jjplus_ja76pf2.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         model = "jjPlus JA76PF2";
  11         compatible = "jjplus,ja76pf2", "qca,ar7161";
  12
  13         memory@0 {
  14                 device_type = "memory";
  15                 reg = <0x0 0x4000000>;
  16         };
  17
  18         chosen {
  19                 bootargs = "console=ttyS0,115200n8";
  20         };
  21
  22         aliases {
  23                 led-boot = &d2;
  24                 led-failsafe = &d2;
  25                 led-running = &d2;
  26                 led-upgrade = &d2;
  27         };
  28
  29         extosc: ref {
  30                 compatible = "fixed-clock";
  31                 #clock-cells = <0>;
  32                 clock-output-names = "ref";
  33                 clock-frequency = <40000000>;
  34         };
  35
  36         leds {
  37                 compatible = "gpio-leds";
  38
  39                 d2: d2 {
  40                         label = "ja76pf2:green:d2";
  41                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  42                 };
  43
  44                 d3 {
  45                         label = "ja76pf2:green:d3";
  46                         gpios = <&gpio 4 GPIO_ACTIVE_HIGH>;
  47                 };
  48
  49                 d4 {
  50                         label = "ja76pf2:green:d4";
  51                         gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
  52                 };
  53         };
  54
  55         keys {
  56                 compatible = "gpio-keys-polled";
  57                 poll-interval = <20>;
  58
  59                 sw1 {
  60                         label = "sw1";
  61                         linux,code = <KEY_RESTART>;
  62                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  63                         debounce-interval = <60>;
  64                 };
  65
  66                 sw2 {
  67                         label = "sw2";
  68                         linux,code = <KEY_WPS_BUTTON>;
  69                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  70                         debounce-interval = <60>;
  71                 };
  72         };
  73 };
  74
  75 &mdio0 {
  76         status = "okay";
  77
  78         phy-mask = <0x1>;
  79
  80         phy0: ethernet-phy@0 {
  81                 reg = <0>;
  82                 phy-mode = "rgmii";
  83         };
  84
  85         phy4: ethernet-phy@4 {
  86                 reg = <4>;
  87                 phy-mode = "rgmii";
  88         };
  89 };
  90
  91 &eth0 {
  92         status = "okay";
  93
  94         phy-handle = <&phy0>;
  95 };
  96
  97 &eth1 {
  98         status = "okay";
  99
 100         phy-handle = <&phy4>;
 101 };
 102
 103 &pcie0 {
 104         status = "okay";
 105 };
 106
 107 &spi {
 108         status = "okay";
 109         num-cs = <1>;
 110
 111         flash@0 {
 112                 compatible = "jedec,spi-nor";
 113                 reg = <0>;
 114                 spi-max-frequency = <104000000>;
 115
 116                 partitions {
 117                         #address-cells = <1>;
 118                         #size-cells = <1>;
 119                         compatible = "ecoscentric,redboot-fis-partitions";
 120                 };
 121         };
 122 };
 123
 124 &uart {
 125         status = "okay";
 126 };