target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "dlink,dir-825-b1", "qca,ar7161";
  11         model = "D-Link DIR825B1";
  12
  13         aliases {
  14                 led-boot = &orange_power;
  15                 led-failsafe = &orange_power;
  16                 led-running = &blue_power;
  17                 led-upgrade = &orange_power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         extosc: ref {
  25                 compatible = "fixed-clock";
  26                 #clock-cells = <0>;
  27                 clock-output-names = "ref";
  28                 clock-frequency = <40000000>;
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33                 blue_usb {
  34                         label = "d-link:blue:usb";
  35                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  36                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  37                         linux,default-trigger = "usbport";
  38                 };
  39
  40                 orange_power: orange_power {
  41                         label = "d-link:orange:power";
  42                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  43                         default-state = "on";
  44                 };
  45
  46                 blue_power: blue_power {
  47                         label = "d-link:blue:power";
  48                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  49                 };
  50
  51                 blue_wps {
  52                         label = "d-link:blue:wps";
  53                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  54                 };
  55
  56                 orange_planet {
  57                         label = "d-link:orange:planet";
  58                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  59                 };
  60
  61                 blue_planet {
  62                         label = "d-link:blue:planet";
  63                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  64                 };
  65         };
  66
  67         ath9k-leds {
  68                 compatible = "gpio-leds";
  69
  70                 wlan2g {
  71                         label = "d-link:blue:wlan2g";
  72                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  73                         linux,default-trigger = "phy0tpt";
  74                 };
  75
  76                 wlan5g {
  77                         label = "d-link:blue:wlan5g";
  78                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  79                         linux,default-trigger = "phy1tpt";
  80                 };
  81         };
  82
  83         keys {
  84                 compatible = "gpio-keys";
  85
  86                 reset {
  87                         label = "reset";
  88                         linux,code = <KEY_RESTART>;
  89                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  90                 };
  91
  92                 wps {
  93                         label = "wps";
  94                         linux,code = <KEY_WPS_BUTTON>;
  95                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  96                 };
  97         };
  98
  99         rtl8366s {
 100                 compatible = "realtek,rtl8366s";
 101                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 102                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 103                 realtek,initvals = <0x06 0x0108>;
 104
 105                 mdio-bus {
 106                         #address-cells = <1>;
 107                         #size-cells = <0>;
 108                         status = "okay";
 109
 110                         phy-mask = <0x10>;
 111
 112                         phy4: ethernet-phy@4 {
 113                                 reg = <4>;
 114                                 phy-mode = "rgmii";
 115                         };
 116                 };
 117         };
 118 };
 119
 120
 121 &usb1 {
 122         #address-cells = <1>;
 123         #size-cells = <0>;
 124         status = "okay";
 125
 126         usb_ochi_port: port@1 {
 127                 reg = <1>;
 128                 #trigger-source-cells = <0>;
 129         };
 130 };
 131
 132 &usb2 {
 133         #address-cells = <1>;
 134         #size-cells = <0>;
 135         status = "okay";
 136
 137         usb_echi_port: port@1 {
 138                 reg = <1>;
 139                 #trigger-source-cells = <0>;
 140         };
 141 };
 142
 143 &usb_phy {
 144         status = "okay";
 145 };
 146
 147 &pcie0 {
 148         status = "okay";
 149
 150         ath9k0: wifi@0,11 {
 151                 compatible = "pci168c,0029";
 152                 reg = <0x8800 0 0 0 0>;
 153                 qca,no-eeprom;
 154                 #gpio-cells = <2>;
 155                 gpio-controller;
 156         };
 157
 158         ath9k1: wifi@0,12 {
 159                 compatible = "pci168c,0029";
 160                 reg = <0x9000 0 0 0 0>;
 161                 qca,no-eeprom;
 162                 #gpio-cells = <2>;
 163                 gpio-controller;
 164         };
 165 };
 166
 167 &uart {
 168         status = "okay";
 169 };
 170
 171 &pll {
 172         clocks = <&extosc>;
 173 };
 174
 175 &spi {
 176         status = "okay";
 177         num-cs = <1>;
 178
 179         flash@0 {
 180                 compatible = "jedec,spi-nor";
 181                 reg = <0>;
 182                 spi-max-frequency = <25000000>;
 183
 184                 partitions {
 185                         compatible = "fixed-partitions";
 186                         #address-cells = <1>;
 187                         #size-cells = <1>;
 188
 189                         partition@0 {
 190                                 label = "u-boot";
 191                                 reg = <0x000000 0x040000>;
 192                                 read-only;
 193                         };
 194
 195                         partition@40000 {
 196                                 label = "config";
 197                                 reg = <0x040000 0x010000>;
 198                                 read-only;
 199                         };
 200
 201                         partition@50000 {
 202                                 compatible = "denx,uimage";
 203                                 label = "firmware";
 204                                 reg = <0x050000 0x610000>;
 205                         };
 206
 207                         caldata: partition@60000 {
 208                                 label = "caldata";
 209                                 reg = <0x660000 0x010000>;
 210                                 read-only;
 211                         };
 212
 213                         partition@670000 {
 214                                 label = "unknown";
 215                                 reg = <0x670000 0x190000>;
 216                                 read-only;
 217                         };
 218                 };
 219         };
 220 };
 221
 222
 223 &eth0 {
 224         status = "okay";
 225         pll-data = <0x11110000 0x00001099 0x00991099>;
 226
 227         fixed-link {
 228                 speed = <1000>;
 229                 full-duplex;
 230         };
 231 };
 232
 233 &eth1 {
 234         status = "okay";
 235         pll-data = <0x11110000 0x00001099 0x00991099>;
 236
 237         phy-handle = <&phy4>;
 238 };