target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "dlink,dir-825-b1", "qca,ar7161";
  11         model = "D-Link DIR825B1";
  12
  13         aliases {
  14                 led-boot = &orange_power;
  15                 led-failsafe = &orange_power;
  16                 led-running = &blue_power;
  17                 led-upgrade = &orange_power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200";
  22         };
  23
  24         extosc: ref {
  25                 compatible = "fixed-clock";
  26                 #clock-cells = <0>;
  27                 clock-output-names = "ref";
  28                 clock-frequency = <40000000>;
  29         };
  30
  31         leds {
  32                 compatible = "gpio-leds";
  33                 blue_usb {
  34                         label = "d-link:blue:usb";
  35                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  36                         default-state = "off";
  37                         trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
  38                         linux,default-trigger = "usbport";
  39                 };
  40
  41                 orange_power: orange_power {
  42                         label = "d-link:orange:power";
  43                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  44                         default-state = "on";
  45                 };
  46
  47                 blue_power: blue_power {
  48                         label = "d-link:blue:power";
  49                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  50                         default-state = "off";
  51                 };
  52
  53                 blue_wps {
  54                         label = "d-link:blue:wps";
  55                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  56                         default-state = "off";
  57                 };
  58
  59                 orange_planet {
  60                         label = "d-link:orange:planet";
  61                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  62                         default-state = "off";
  63                 };
  64
  65                 blue_planet {
  66                         label = "d-link:blue:planet";
  67                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  68                         default-state = "off";
  69                 };
  70         };
  71
  72         ath9k-leds {
  73                 compatible = "gpio-leds";
  74
  75                 wlan2g {
  76                         label = "d-link:blue:wlan2g";
  77                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  78                         default-state = "off";
  79                         linux,default-trigger = "phy0tpt";
  80                 };
  81
  82                 wlan5g {
  83                         label = "d-link:blue:wlan5g";
  84                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  85                         default-state = "off";
  86                         linux,default-trigger = "phy1tpt";
  87                 };
  88         };
  89
  90         keys {
  91                 compatible = "gpio-keys-polled";
  92                 poll-interval = <20>;
  93
  94                 reset {
  95                         label = "reset";
  96                         linux,code = <KEY_RESTART>;
  97                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  98                         debounce-interval = <60>;
  99                 };
 100
 101                 wps {
 102                         label = "wps";
 103                         linux,code = <KEY_WPS_BUTTON>;
 104                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
 105                         debounce-interval = <60>;
 106                 };
 107         };
 108
 109         rtl8366s {
 110                 compatible = "realtek,rtl8366s";
 111                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
 112                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 113                 realtek,initvals = <0x06 0x0108>;
 114
 115                 mdio-bus {
 116                         #address-cells = <1>;
 117                         #size-cells = <0>;
 118                         status = "okay";
 119
 120                         phy-mask = <0x10>;
 121
 122                         phy4: ethernet-phy@4 {
 123                                 reg = <4>;
 124                                 phy-mode = "rgmii";
 125                         };
 126                 };
 127         };
 128 };
 129
 130
 131 &usb1 {
 132         #address-cells = <1>;
 133         #size-cells = <0>;
 134         status = "okay";
 135
 136         usb_ochi_port: port@1 {
 137                 reg = <1>;
 138                 #trigger-source-cells = <0>;
 139         };
 140 };
 141
 142 &usb2 {
 143         #address-cells = <1>;
 144         #size-cells = <0>;
 145         status = "okay";
 146
 147         usb_echi_port: port@1 {
 148                 reg = <1>;
 149                 #trigger-source-cells = <0>;
 150         };
 151 };
 152
 153 &usb_phy {
 154         status = "okay";
 155 };
 156
 157 &pcie0 {
 158         status = "okay";
 159
 160         ath9k0: wifi@0,11 {
 161                 compatible = "pci168c,0029";
 162                 reg = <0x8800 0 0 0 0>;
 163                 qca,no-eeprom;
 164                 #gpio-cells = <2>;
 165                 gpio-controller;
 166         };
 167
 168         ath9k1: wifi@0,12 {
 169                 compatible = "pci168c,0029";
 170                 reg = <0x9000 0 0 0 0>;
 171                 qca,no-eeprom;
 172                 #gpio-cells = <2>;
 173                 gpio-controller;
 174         };
 175 };
 176
 177 &uart {
 178         status = "okay";
 179 };
 180
 181 &pll {
 182         clocks = <&extosc>;
 183 };
 184
 185 &spi {
 186         status = "okay";
 187         num-cs = <1>;
 188
 189         flash@0 {
 190                 compatible = "jedec,spi-nor";
 191                 reg = <0>;
 192                 spi-max-frequency = <25000000>;
 193
 194                 partitions {
 195                         compatible = "fixed-partitions";
 196                         #address-cells = <1>;
 197                         #size-cells = <1>;
 198
 199                         partition@0 {
 200                                 label = "u-boot";
 201                                 reg = <0x000000 0x040000>;
 202                                 read-only;
 203                         };
 204
 205                         partition@40000 {
 206                                 label = "config";
 207                                 reg = <0x040000 0x010000>;
 208                                 read-only;
 209                         };
 210
 211                         partition@50000 {
 212                                 label = "firmware";
 213                                 reg = <0x050000 0x610000>;
 214                         };
 215
 216                         caldata: partition@60000 {
 217                                 label = "caldata";
 218                                 reg = <0x660000 0x010000>;
 219                                 read-only;
 220                         };
 221
 222                         partition@670000 {
 223                                 label = "unknown";
 224                                 reg = <0x670000 0x190000>;
 225                                 read-only;
 226                         };
 227                 };
 228         };
 229 };
 230
 231
 232 &eth0 {
 233         status = "okay";
 234         pll-data = <0x11110000 0x00001099 0x00991099>;
 235
 236         fixed-link {
 237                 speed = <1000>;
 238                 full-duplex;
 239         };
 240 };
 241
 242 &eth1 {
 243         status = "okay";
 244         pll-data = <0x11110000 0x00001099 0x00991099>;
 245
 246         phy-handle = <&phy4>;
 247 };