target/linux/ath79/dts/ar7161_dlink_dir-825-b1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "ar7100.dtsi"
   8
   9 / {
  10         compatible = "dlink,dir-825-b1", "qca,ar7161";
  11         model = "D-Link DIR825B1";
  12
  13         aliases {
  14                 led-boot = &led_power_orange;
  15                 led-failsafe = &led_power_orange;
  16                 led-running = &led_power_blue;
  17                 led-upgrade = &led_power_orange;
  18         };
  19
  20         extosc: ref {
  21                 compatible = "fixed-clock";
  22                 #clock-cells = <0>;
  23                 clock-output-names = "ref";
  24                 clock-frequency = <40000000>;
  25         };
  26
  27         leds {
  28                 compatible = "gpio-leds";
  29
  30                 usb {
  31                         label = "d-link:blue:usb";
  32                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  33                         trigger-sources = <&usb_ohci_port>, <&usb_ehci_port>;
  34                         linux,default-trigger = "usbport";
  35                 };
  36
  37                 led_power_orange: power_orange {
  38                         label = "d-link:orange:power";
  39                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  40                         default-state = "on";
  41                 };
  42
  43                 led_power_blue: power_blue {
  44                         label = "d-link:blue:power";
  45                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 wps {
  49                         label = "d-link:blue:wps";
  50                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 planet_orange {
  54                         label = "d-link:orange:planet";
  55                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  56                 };
  57
  58                 planet_blue {
  59                         label = "d-link:blue:planet";
  60                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  61                 };
  62         };
  63
  64         ath9k-leds {
  65                 compatible = "gpio-leds";
  66
  67                 wlan2g {
  68                         label = "d-link:blue:wlan2g";
  69                         gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
  70                         linux,default-trigger = "phy0tpt";
  71                 };
  72
  73                 wlan5g {
  74                         label = "d-link:blue:wlan5g";
  75                         gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
  76                         linux,default-trigger = "phy1tpt";
  77                 };
  78         };
  79
  80         keys {
  81                 compatible = "gpio-keys";
  82
  83                 reset {
  84                         label = "reset";
  85                         linux,code = <KEY_RESTART>;
  86                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  87                 };
  88
  89                 wps {
  90                         label = "wps";
  91                         linux,code = <KEY_WPS_BUTTON>;
  92                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  93                 };
  94         };
  95
  96         rtl8366s {
  97                 compatible = "realtek,rtl8366s";
  98                 gpio-sda = <&gpio 5 GPIO_ACTIVE_HIGH>;
  99                 gpio-sck = <&gpio 7 GPIO_ACTIVE_HIGH>;
 100                 realtek,initvals = <0x06 0x0108>;
 101
 102                 mdio-bus {
 103                         #address-cells = <1>;
 104                         #size-cells = <0>;
 105                         status = "okay";
 106
 107                         phy-mask = <0x10>;
 108
 109                         phy4: ethernet-phy@4 {
 110                                 reg = <4>;
 111                                 phy-mode = "rgmii";
 112                         };
 113                 };
 114         };
 115 };
 116
 117 &usb1 {
 118         #address-cells = <1>;
 119         #size-cells = <0>;
 120         status = "okay";
 121
 122         usb_ohci_port: port@1 {
 123                 reg = <1>;
 124                 #trigger-source-cells = <0>;
 125         };
 126 };
 127
 128 &usb2 {
 129         #address-cells = <1>;
 130         #size-cells = <0>;
 131         status = "okay";
 132
 133         usb_ehci_port: port@1 {
 134                 reg = <1>;
 135                 #trigger-source-cells = <0>;
 136         };
 137 };
 138
 139 &usb_phy {
 140         status = "okay";
 141 };
 142
 143 &pcie0 {
 144         status = "okay";
 145
 146         ath9k0: wifi@0,11 {
 147                 compatible = "pci168c,0029";
 148                 reg = <0x8800 0 0 0 0>;
 149                 qca,no-eeprom;
 150                 #gpio-cells = <2>;
 151                 gpio-controller;
 152         };
 153
 154         ath9k1: wifi@0,12 {
 155                 compatible = "pci168c,0029";
 156                 reg = <0x9000 0 0 0 0>;
 157                 qca,no-eeprom;
 158                 #gpio-cells = <2>;
 159                 gpio-controller;
 160         };
 161 };
 162
 163 &uart {
 164         status = "okay";
 165 };
 166
 167 &pll {
 168         clocks = <&extosc>;
 169 };
 170
 171 &spi {
 172         status = "okay";
 173
 174         num-cs = <1>;
 175
 176         flash@0 {
 177                 compatible = "jedec,spi-nor";
 178                 reg = <0>;
 179                 spi-max-frequency = <25000000>;
 180
 181                 partitions {
 182                         compatible = "fixed-partitions";
 183                         #address-cells = <1>;
 184                         #size-cells = <1>;
 185
 186                         partition@0 {
 187                                 label = "u-boot";
 188                                 reg = <0x000000 0x040000>;
 189                                 read-only;
 190                         };
 191
 192                         partition@40000 {
 193                                 label = "config";
 194                                 reg = <0x040000 0x010000>;
 195                                 read-only;
 196                         };
 197
 198                         partition@50000 {
 199                                 compatible = "denx,uimage";
 200                                 label = "firmware";
 201                                 reg = <0x050000 0x610000>;
 202                         };
 203
 204                         caldata: partition@60000 {
 205                                 label = "caldata";
 206                                 reg = <0x660000 0x010000>;
 207                                 read-only;
 208                         };
 209
 210                         partition@670000 {
 211                                 label = "unknown";
 212                                 reg = <0x670000 0x190000>;
 213                                 read-only;
 214                         };
 215                 };
 216         };
 217 };
 218
 219 &eth0 {
 220         status = "okay";
 221
 222         pll-data = <0x11110000 0x00001099 0x00991099>;
 223
 224         fixed-link {
 225                 speed = <1000>;
 226                 full-duplex;
 227         };
 228 };
 229
 230 &eth1 {
 231         status = "okay";
 232
 233         pll-data = <0x11110000 0x00001099 0x00991099>;
 234
 235         phy-handle = <&phy4>;
 236 };