add MyLoader support
[librecmc/librecmc.git] / target / linux / ar71xx / files / include / linux / myloader.h
1 /*
2  *  Compex's MyLoader specific definitions
3  *
4  *  Copyright (C) 2006-2008 Gabor Juhos <juhosg@openwrt.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  *
10  */
11
12 #ifndef _MYLOADER_H_
13 #define _MYLOADER_H_
14
15 /* Myloader specific magic numbers */
16 #define MYLO_MAGIC_SYS_PARAMS   0x20021107
17 #define MYLO_MAGIC_PARTITIONS   0x20021103
18 #define MYLO_MAGIC_BOARD_PARAMS 0x20021103
19
20 /* Vendor ID's (seems to be same as the PCI vendor ID's) */
21 #define VENID_COMPEX            0x11F6
22
23 /* Devices based on the ADM5120 */
24 #define DEVID_COMPEX_NP27G      0x0078
25 #define DEVID_COMPEX_NP28G      0x044C
26 #define DEVID_COMPEX_NP28GHS    0x044E
27 #define DEVID_COMPEX_WP54Gv1C   0x0514
28 #define DEVID_COMPEX_WP54G      0x0515
29 #define DEVID_COMPEX_WP54AG     0x0546
30 #define DEVID_COMPEX_WPP54AG    0x0550
31 #define DEVID_COMPEX_WPP54G     0x0555
32
33 /* Devices based on the Atheros AR71xx */
34 #define DEVID_COMPEX_WP543      0x0640
35
36 /* Devices based on the IXP422 */
37 #define DEVID_COMPEX_WP18       0x047E
38 #define DEVID_COMPEX_NP18A      0x0489
39
40 /* Other devices */
41 #define DEVID_COMPEX_NP26G8M    0x03E8
42 #define DEVID_COMPEX_NP26G16M   0x03E9
43
44 struct mylo_partition {
45         uint16_t        flags;  /* partition flags */
46         uint16_t        type;   /* type of the partition */
47         uint32_t        addr;   /* relative address of the partition from the
48                                    flash start */
49         uint32_t        size;   /* size of the partition in bytes */
50         uint32_t        param;  /* if this is the active partition, the
51                                    MyLoader load code to this address */
52 };
53
54 #define PARTITION_FLAG_ACTIVE   0x8000 /* this is the active partition,
55                                         * MyLoader loads firmware from here */
56 #define PARTITION_FLAG_ISRAM    0x2000 /* FIXME: this is a RAM partition? */
57 #define PARTIIION_FLAG_RAMLOAD  0x1000 /* FIXME: load this partition into the RAM? */
58 #define PARTITION_FLAG_PRELOAD  0x0800 /* the partition data preloaded to RAM
59                                         * before decompression */
60 #define PARTITION_FLAG_LZMA     0x0100 /* partition data compressed by LZMA */
61 #define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
62
63 #define PARTITION_TYPE_FREE     0
64 #define PARTITION_TYPE_USED     1
65
66 #define MYLO_MAX_PARTITIONS     8       /* maximum number of partitions in the
67                                            partition table */
68
69 struct mylo_partition_table {
70         uint32_t        magic;          /* must be MYLO_MAGIC_PARTITIONS */
71         uint32_t        res0;           /* unknown/unused */
72         uint32_t        res1;           /* unknown/unused */
73         uint32_t        res2;           /* unknown/unused */
74         struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
75 };
76
77 struct mylo_partition_header {
78         uint32_t        len;            /* length of the partition data */
79         uint32_t        crc;            /* CRC value of the partition data */
80 };
81
82 struct mylo_system_params {
83         uint32_t        magic;          /* must be MYLO_MAGIC_SYS_PARAMS */
84         uint32_t        res0;
85         uint32_t        res1;
86         uint32_t        mylo_ver;
87         uint16_t        vid;            /* Vendor ID */
88         uint16_t        did;            /* Device ID */
89         uint16_t        svid;           /* Sub Vendor ID */
90         uint16_t        sdid;           /* Sub Device ID */
91         uint32_t        rev;            /* device revision */
92         uint32_t        fwhi;
93         uint32_t        fwlo;
94         uint32_t        tftp_addr;
95         uint32_t        prog_start;
96         uint32_t        flash_size;     /* size of boot FLASH in bytes */
97         uint32_t        dram_size;      /* size of onboard RAM in bytes */
98 };
99
100 struct mylo_eth_addr {
101         uint8_t mac[6];
102         uint8_t csum[2];
103 };
104
105 #define MYLO_ETHADDR_COUNT      8       /* maximum number of ethernet address
106                                            in the board parameters */
107
108 struct mylo_board_params {
109         uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
110         uint32_t        res0;
111         uint32_t        res1;
112         uint32_t        res2;
113         struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
114 };
115
116 #endif /* _MYLOADER_H_*/