ar71xx: remove NO_AUTOINCR flag from the NAND drivers
[oweals/openwrt.git] / target / linux / ar71xx / files / drivers / mtd / nand / rb750_nand.c
1 /*
2  *  NAND flash driver for the MikroTik RouterBOARD 750
3  *
4  *  Copyright (C) 2010-2012 Gabor Juhos <juhosg@openwrt.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify it
7  *  under the terms of the GNU General Public License version 2 as published
8  *  by the Free Software Foundation.
9  */
10
11 #include <linux/kernel.h>
12 #include <linux/module.h>
13 #include <linux/mtd/nand.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/platform_device.h>
17 #include <linux/io.h>
18 #include <linux/slab.h>
19
20 #include <asm/mach-ath79/ar71xx_regs.h>
21 #include <asm/mach-ath79/ath79.h>
22 #include <asm/mach-ath79/mach-rb750.h>
23
24 #define DRV_NAME        "rb750-nand"
25 #define DRV_VERSION     "0.1.0"
26 #define DRV_DESC        "NAND flash driver for the RouterBOARD 750"
27
28 #define RB750_NAND_IO0          BIT(RB750_GPIO_NAND_IO0)
29 #define RB750_NAND_ALE          BIT(RB750_GPIO_NAND_ALE)
30 #define RB750_NAND_CLE          BIT(RB750_GPIO_NAND_CLE)
31 #define RB750_NAND_NRE          BIT(RB750_GPIO_NAND_NRE)
32 #define RB750_NAND_NWE          BIT(RB750_GPIO_NAND_NWE)
33 #define RB750_NAND_RDY          BIT(RB750_GPIO_NAND_RDY)
34
35 #define RB750_NAND_DATA_SHIFT   1
36 #define RB750_NAND_DATA_BITS    (0xff << RB750_NAND_DATA_SHIFT)
37 #define RB750_NAND_INPUT_BITS   (RB750_NAND_DATA_BITS | RB750_NAND_RDY)
38 #define RB750_NAND_OUTPUT_BITS  (RB750_NAND_ALE | RB750_NAND_CLE | \
39                                  RB750_NAND_NRE | RB750_NAND_NWE)
40
41 struct rb750_nand_info {
42         struct nand_chip        chip;
43         struct mtd_info         mtd;
44         struct rb7xx_nand_platform_data *pdata;
45 };
46
47 static inline struct rb750_nand_info *mtd_to_rbinfo(struct mtd_info *mtd)
48 {
49         return container_of(mtd, struct rb750_nand_info, mtd);
50 }
51
52 /*
53  * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
54  * will not be able to find the kernel that we load.
55  */
56 static struct nand_ecclayout rb750_nand_ecclayout = {
57         .eccbytes       = 6,
58         .eccpos         = { 8, 9, 10, 13, 14, 15 },
59         .oobavail       = 9,
60         .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
61 };
62
63 static struct mtd_partition rb750_nand_partitions[] = {
64         {
65                 .name   = "booter",
66                 .offset = 0,
67                 .size   = (256 * 1024),
68                 .mask_flags = MTD_WRITEABLE,
69         }, {
70                 .name   = "kernel",
71                 .offset = (256 * 1024),
72                 .size   = (4 * 1024 * 1024) - (256 * 1024),
73         }, {
74                 .name   = "rootfs",
75                 .offset = MTDPART_OFS_NXTBLK,
76                 .size   = MTDPART_SIZ_FULL,
77         },
78 };
79
80 static void rb750_nand_write(const u8 *buf, unsigned len)
81 {
82         void __iomem *base = ath79_gpio_base;
83         u32 out;
84         u32 t;
85         unsigned i;
86
87         /* set data lines to output mode */
88         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
89         __raw_writel(t | RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
90
91         out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
92         out &= ~(RB750_NAND_DATA_BITS | RB750_NAND_NWE);
93         for (i = 0; i != len; i++) {
94                 u32 data;
95
96                 data = buf[i];
97                 data <<= RB750_NAND_DATA_SHIFT;
98                 data |= out;
99                 __raw_writel(data, base + AR71XX_GPIO_REG_OUT);
100
101                 __raw_writel(data | RB750_NAND_NWE, base + AR71XX_GPIO_REG_OUT);
102                 /* flush write */
103                 __raw_readl(base + AR71XX_GPIO_REG_OUT);
104         }
105
106         /* set data lines to input mode */
107         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
108         __raw_writel(t & ~RB750_NAND_DATA_BITS, base + AR71XX_GPIO_REG_OE);
109         /* flush write */
110         __raw_readl(base + AR71XX_GPIO_REG_OE);
111 }
112
113 static int rb750_nand_read_verify(u8 *read_buf, unsigned len,
114                                   const u8 *verify_buf)
115 {
116         void __iomem *base = ath79_gpio_base;
117         unsigned i;
118
119         for (i = 0; i < len; i++) {
120                 u8 data;
121
122                 /* activate RE line */
123                 __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_CLEAR);
124                 /* flush write */
125                 __raw_readl(base + AR71XX_GPIO_REG_CLEAR);
126
127                 /* read input lines */
128                 data = __raw_readl(base + AR71XX_GPIO_REG_IN) >>
129                        RB750_NAND_DATA_SHIFT;
130
131                 /* deactivate RE line */
132                 __raw_writel(RB750_NAND_NRE, base + AR71XX_GPIO_REG_SET);
133
134                 if (read_buf)
135                         read_buf[i] = data;
136                 else if (verify_buf && verify_buf[i] != data)
137                         return -EFAULT;
138         }
139
140         return 0;
141 }
142
143 static void rb750_nand_select_chip(struct mtd_info *mtd, int chip)
144 {
145         struct rb750_nand_info *rbinfo = mtd_to_rbinfo(mtd);
146         void __iomem *base = ath79_gpio_base;
147         u32 t;
148
149         if (chip >= 0) {
150                 rbinfo->pdata->enable_pins();
151
152                 /* set input mode for data lines */
153                 t = __raw_readl(base + AR71XX_GPIO_REG_OE);
154                 __raw_writel(t & ~RB750_NAND_INPUT_BITS,
155                              base + AR71XX_GPIO_REG_OE);
156
157                 /* deactivate RE and WE lines */
158                 __raw_writel(RB750_NAND_NRE | RB750_NAND_NWE,
159                              base + AR71XX_GPIO_REG_SET);
160                 /* flush write */
161                 (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
162
163                 /* activate CE line */
164                 __raw_writel(rbinfo->pdata->nce_line,
165                              base + AR71XX_GPIO_REG_CLEAR);
166         } else {
167                 /* deactivate CE line */
168                 __raw_writel(rbinfo->pdata->nce_line,
169                              base + AR71XX_GPIO_REG_SET);
170                 /* flush write */
171                 (void) __raw_readl(base + AR71XX_GPIO_REG_SET);
172
173                 t = __raw_readl(base + AR71XX_GPIO_REG_OE);
174                 __raw_writel(t | RB750_NAND_IO0 | RB750_NAND_RDY,
175                              base + AR71XX_GPIO_REG_OE);
176
177                 rbinfo->pdata->disable_pins();
178         }
179 }
180
181 static int rb750_nand_dev_ready(struct mtd_info *mtd)
182 {
183         void __iomem *base = ath79_gpio_base;
184
185         return !!(__raw_readl(base + AR71XX_GPIO_REG_IN) & RB750_NAND_RDY);
186 }
187
188 static void rb750_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
189                                 unsigned int ctrl)
190 {
191         if (ctrl & NAND_CTRL_CHANGE) {
192                 void __iomem *base = ath79_gpio_base;
193                 u32 t;
194
195                 t = __raw_readl(base + AR71XX_GPIO_REG_OUT);
196
197                 t &= ~(RB750_NAND_CLE | RB750_NAND_ALE);
198                 t |= (ctrl & NAND_CLE) ? RB750_NAND_CLE : 0;
199                 t |= (ctrl & NAND_ALE) ? RB750_NAND_ALE : 0;
200
201                 __raw_writel(t, base + AR71XX_GPIO_REG_OUT);
202                 /* flush write */
203                 __raw_readl(base + AR71XX_GPIO_REG_OUT);
204         }
205
206         if (cmd != NAND_CMD_NONE) {
207                 u8 t = cmd;
208                 rb750_nand_write(&t, 1);
209         }
210 }
211
212 static u8 rb750_nand_read_byte(struct mtd_info *mtd)
213 {
214         u8 data = 0;
215         rb750_nand_read_verify(&data, 1, NULL);
216         return data;
217 }
218
219 static void rb750_nand_read_buf(struct mtd_info *mtd, u8 *buf, int len)
220 {
221         rb750_nand_read_verify(buf, len, NULL);
222 }
223
224 static void rb750_nand_write_buf(struct mtd_info *mtd, const u8 *buf, int len)
225 {
226         rb750_nand_write(buf, len);
227 }
228
229 static int rb750_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, int len)
230 {
231         return rb750_nand_read_verify(NULL, len, buf);
232 }
233
234 static void __init rb750_nand_gpio_init(struct rb750_nand_info *info)
235 {
236         void __iomem *base = ath79_gpio_base;
237         u32 out;
238         u32 t;
239
240         out = __raw_readl(base + AR71XX_GPIO_REG_OUT);
241
242         /* setup output levels */
243         __raw_writel(RB750_NAND_NCE | RB750_NAND_NRE | RB750_NAND_NWE,
244                      base + AR71XX_GPIO_REG_SET);
245
246         __raw_writel(RB750_NAND_ALE | RB750_NAND_CLE,
247                      base + AR71XX_GPIO_REG_CLEAR);
248
249         /* setup input lines */
250         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
251         __raw_writel(t & ~(RB750_NAND_INPUT_BITS), base + AR71XX_GPIO_REG_OE);
252
253         /* setup output lines */
254         t = __raw_readl(base + AR71XX_GPIO_REG_OE);
255         t |= RB750_NAND_OUTPUT_BITS;
256         t |= info->pdata->nce_line;
257         __raw_writel(t, base + AR71XX_GPIO_REG_OE);
258
259         info->pdata->latch_change(~out & RB750_NAND_IO0, out & RB750_NAND_IO0);
260 }
261
262 static int __devinit rb750_nand_probe(struct platform_device *pdev)
263 {
264         struct rb750_nand_info  *info;
265         struct rb7xx_nand_platform_data *pdata;
266         int ret;
267
268         printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
269
270         pdata = pdev->dev.platform_data;
271         if (!pdata)
272                 return -EINVAL;
273
274         info = kzalloc(sizeof(*info), GFP_KERNEL);
275         if (!info)
276                 return -ENOMEM;
277
278         info->chip.priv = &info;
279         info->mtd.priv  = &info->chip;
280         info->mtd.owner = THIS_MODULE;
281
282         info->chip.select_chip  = rb750_nand_select_chip;
283         info->chip.cmd_ctrl     = rb750_nand_cmd_ctrl;
284         info->chip.dev_ready    = rb750_nand_dev_ready;
285         info->chip.read_byte    = rb750_nand_read_byte;
286         info->chip.write_buf    = rb750_nand_write_buf;
287         info->chip.read_buf     = rb750_nand_read_buf;
288         info->chip.verify_buf   = rb750_nand_verify_buf;
289
290         info->chip.chip_delay   = 25;
291         info->chip.ecc.mode     = NAND_ECC_SOFT;
292
293         info->pdata = pdata;
294
295         platform_set_drvdata(pdev, info);
296
297         rb750_nand_gpio_init(info);
298
299         ret = nand_scan_ident(&info->mtd, 1, NULL);
300         if (ret) {
301                 ret = -ENXIO;
302                 goto err_free_info;
303         }
304
305         if (info->mtd.writesize == 512)
306                 info->chip.ecc.layout = &rb750_nand_ecclayout;
307
308         ret = nand_scan_tail(&info->mtd);
309         if (ret) {
310                 return -ENXIO;
311                 goto err_set_drvdata;
312         }
313
314         ret = mtd_device_register(&info->mtd, rb750_nand_partitions,
315                                  ARRAY_SIZE(rb750_nand_partitions));
316         if (ret)
317                 goto err_release_nand;
318
319         return 0;
320
321 err_release_nand:
322         nand_release(&info->mtd);
323 err_set_drvdata:
324         platform_set_drvdata(pdev, NULL);
325 err_free_info:
326         kfree(info);
327         return ret;
328 }
329
330 static int __devexit rb750_nand_remove(struct platform_device *pdev)
331 {
332         struct rb750_nand_info *info = platform_get_drvdata(pdev);
333
334         nand_release(&info->mtd);
335         platform_set_drvdata(pdev, NULL);
336         kfree(info);
337
338         return 0;
339 }
340
341 static struct platform_driver rb750_nand_driver = {
342         .probe  = rb750_nand_probe,
343         .remove = __devexit_p(rb750_nand_remove),
344         .driver = {
345                 .name   = DRV_NAME,
346                 .owner  = THIS_MODULE,
347         },
348 };
349
350 static int __init rb750_nand_init(void)
351 {
352         return platform_driver_register(&rb750_nand_driver);
353 }
354
355 static void __exit rb750_nand_exit(void)
356 {
357         platform_driver_unregister(&rb750_nand_driver);
358 }
359
360 module_init(rb750_nand_init);
361 module_exit(rb750_nand_exit);
362
363 MODULE_DESCRIPTION(DRV_DESC);
364 MODULE_VERSION(DRV_VERSION);
365 MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
366 MODULE_LICENSE("GPL v2");