target/linux/ar71xx/files/arch/mips/ath79/mach-bhr-4grv2.c

   1 /*
   2  * Buffalo BHR-4GRV2 board support
   3  *
   4  * Copyright (c) 2012 Qualcomm Atheros
   5  * Copyright (c) 2012-2013 Gabor Juhos <juhosg@openwrt.org>
   6  * Copyright (c) 2016 FUKAUMI Naoki <naobsd@gmail.com>
   7  *
   8  * Based on mach-ap136.c and mach-wzr-450hp2.c
   9  *
  10  * Permission to use, copy, modify, and/or distribute this software for any
  11  * purpose with or without fee is hereby granted, provided that the above
  12  * copyright notice and this permission notice appear in all copies.
  13  *
  14  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  15  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  16  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  17  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  18  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  19  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  20  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  21  *
  22  */
  23
  24 #include <linux/platform_device.h>
  25 #include <linux/ar8216_platform.h>
  26
  27 #include <asm/mach-ath79/ar71xx_regs.h>
  28
  29 #include "common.h"
  30 #include "dev-eth.h"
  31 #include "dev-gpio-buttons.h"
  32 #include "dev-leds-gpio.h"
  33 #include "dev-m25p80.h"
  34 #include "machtypes.h"
  35
  36 #define BHR_4GRV2_GPIO_LED_VPN_RED      3
  37 #define BHR_4GRV2_GPIO_LED_VPN_GREEN    18
  38 #define BHR_4GRV2_GPIO_LED_POWER_GREEN  19
  39 #define BHR_4GRV2_GPIO_LED_DIAG_RED     20
  40
  41 #define BHR_4GRV2_GPIO_BTN_RESET        17
  42 #define BHR_4GRV2_GPIO_BTN_ECO          21
  43
  44 #define BHR_4GRV2_KEYS_POLL_INTERVAL    20      /* msecs */
  45 #define BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL        (3 * BHR_4GRV2_KEYS_POLL_INTERVAL)
  46 #define BHR_4GRV2_MAC0_OFFSET           0
  47 #define BHR_4GRV2_MAC1_OFFSET           6
  48
  49 static struct gpio_led bhr_4grv2_leds_gpio[] __initdata = {
  50         {
  51                 .name           = "buffalo:red:vpn",
  52                 .gpio           = BHR_4GRV2_GPIO_LED_VPN_RED,
  53                 .active_low     = 1,
  54         },
  55         {
  56                 .name           = "buffalo:green:vpn",
  57                 .gpio           = BHR_4GRV2_GPIO_LED_VPN_GREEN,
  58                 .active_low     = 1,
  59         },
  60         {
  61                 .name           = "buffalo:green:power",
  62                 .gpio           = BHR_4GRV2_GPIO_LED_POWER_GREEN,
  63                 .active_low     = 1,
  64         },
  65         {
  66                 .name           = "buffalo:red:diag",
  67                 .gpio           = BHR_4GRV2_GPIO_LED_DIAG_RED,
  68                 .active_low     = 1,
  69         }
  70 };
  71
  72 static struct gpio_keys_button bhr_4grv2_gpio_keys[] __initdata = {
  73         {
  74                 .desc           = "Reset button",
  75                 .type           = EV_KEY,
  76                 .code           = KEY_RESTART,
  77                 .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
  78                 .gpio           = BHR_4GRV2_GPIO_BTN_RESET,
  79                 .active_low     = 1,
  80         },
  81         {
  82                 .desc           = "ECO button",
  83                 .type           = EV_KEY,
  84                 .code           = BTN_0,
  85                 .debounce_interval = BHR_4GRV2_KEYS_DEBOUNCE_INTERVAL,
  86                 .gpio           = BHR_4GRV2_GPIO_BTN_ECO,
  87                 .active_low     = 1,
  88         },
  89 };
  90
  91 /* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
  92 static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad0_cfg = {
  93         .mode = AR8327_PAD_MAC_SGMII,
  94         .sgmii_delay_en = true,
  95 };
  96
  97 /* GMAC6 of the AR8327 switch is connected to GMAC0 via RGMII */
  98 static struct ar8327_pad_cfg bhr_4grv2_ar8327_pad6_cfg = {
  99         .mode = AR8327_PAD_MAC_RGMII,
 100         .txclk_delay_en = true,
 101         .rxclk_delay_en = true,
 102         .txclk_delay_sel = AR8327_CLK_DELAY_SEL1,
 103         .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2,
 104 };
 105
 106 static struct ar8327_platform_data bhr_4grv2_ar8327_data = {
 107         .pad0_cfg = &bhr_4grv2_ar8327_pad0_cfg,
 108         .pad6_cfg = &bhr_4grv2_ar8327_pad6_cfg,
 109         .port0_cfg = {
 110                 .force_link = 1,
 111                 .speed = AR8327_PORT_SPEED_1000,
 112                 .duplex = 1,
 113                 .txpause = 1,
 114                 .rxpause = 1,
 115         },
 116         .port6_cfg = {
 117                 .force_link = 1,
 118                 .speed = AR8327_PORT_SPEED_1000,
 119                 .duplex = 1,
 120                 .txpause = 1,
 121                 .rxpause = 1,
 122         },
 123 };
 124
 125 static struct mdio_board_info bhr_4grv2_mdio0_info[] = {
 126         {
 127                 .bus_id = "ag71xx-mdio.0",
 128                 .phy_addr = 0,
 129                 .platform_data = &bhr_4grv2_ar8327_data,
 130         },
 131 };
 132
 133 static void __init bhr_4grv2_setup(void)
 134 {
 135         u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 136
 137         ath79_register_m25p80(NULL);
 138
 139         ath79_register_leds_gpio(-1, ARRAY_SIZE(bhr_4grv2_leds_gpio),
 140                                  bhr_4grv2_leds_gpio);
 141         ath79_register_gpio_keys_polled(-1, BHR_4GRV2_KEYS_POLL_INTERVAL,
 142                                         ARRAY_SIZE(bhr_4grv2_gpio_keys),
 143                                         bhr_4grv2_gpio_keys);
 144
 145         mdiobus_register_board_info(bhr_4grv2_mdio0_info,
 146                                     ARRAY_SIZE(bhr_4grv2_mdio0_info));
 147         ath79_register_mdio(0, 0x0);
 148
 149         ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN);
 150
 151         /* GMAC0 is connected to the RGMII interface */
 152         ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
 153         ath79_eth0_data.phy_mask = BIT(0);
 154         ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev;
 155         ath79_eth0_pll_data.pll_1000 = 0x56000000;
 156
 157         ath79_init_mac(ath79_eth0_data.mac_addr, art + BHR_4GRV2_MAC0_OFFSET, 0);
 158         ath79_register_eth(0);
 159
 160         /* GMAC1 is connected to the SGMII interface */
 161         ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
 162         ath79_eth1_data.speed = SPEED_1000;
 163         ath79_eth1_data.duplex = DUPLEX_FULL;
 164         ath79_eth1_pll_data.pll_1000 = 0x03000101;
 165
 166         ath79_init_mac(ath79_eth1_data.mac_addr, art + BHR_4GRV2_MAC1_OFFSET, 0);
 167         ath79_register_eth(1);
 168 }
 169
 170 MIPS_MACHINE(ATH79_MACH_BHR_4GRV2, "BHR-4GRV2",
 171              "Buffalo BHR-4GRV2", bhr_4grv2_setup);