2 * Linksys WRT160NL board support
4 * Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
14 #include <asm/mach-ar71xx/ar71xx.h>
18 #include "dev-m25p80.h"
19 #include "dev-ar913x-wmac.h"
20 #include "dev-gpio-buttons.h"
21 #include "dev-leds-gpio.h"
24 #define WRT160NL_GPIO_LED_POWER 14
25 #define WRT160NL_GPIO_LED_WPS_AMBER 9
26 #define WRT160NL_GPIO_LED_WPS_BLUE 8
27 #define WRT160NL_GPIO_LED_WLAN 6
29 #define WRT160NL_GPIO_BTN_WPS 7
30 #define WRT160NL_GPIO_BTN_RESET 21
32 #define WRT160NL_BUTTONS_POLL_INTERVAL 20
34 #ifdef CONFIG_MTD_PARTITIONS
35 static struct mtd_partition wrt160nl_partitions[] = {
40 .mask_flags = MTD_WRITEABLE,
53 .mask_flags = MTD_WRITEABLE,
58 .mask_flags = MTD_WRITEABLE,
65 #endif /* CONFIG_MTD_PARTITIONS */
67 static struct flash_platform_data wrt160nl_flash_data = {
68 #ifdef CONFIG_MTD_PARTITIONS
69 .parts = wrt160nl_partitions,
70 .nr_parts = ARRAY_SIZE(wrt160nl_partitions),
74 static struct gpio_led wrt160nl_leds_gpio[] __initdata = {
76 .name = "wrt160nl:blue:power",
77 .gpio = WRT160NL_GPIO_LED_POWER,
79 .default_trigger = "default-on",
81 .name = "wrt160nl:amber:wps",
82 .gpio = WRT160NL_GPIO_LED_WPS_AMBER,
85 .name = "wrt160nl:blue:wps",
86 .gpio = WRT160NL_GPIO_LED_WPS_BLUE,
89 .name = "wrt160nl:blue:wlan",
90 .gpio = WRT160NL_GPIO_LED_WLAN,
95 static struct gpio_button wrt160nl_gpio_buttons[] __initdata = {
101 .gpio = WRT160NL_GPIO_BTN_RESET,
108 .gpio = WRT160NL_GPIO_BTN_WPS,
113 static void __init wrt160nl_setup(void)
115 u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000);
117 ar71xx_add_device_mdio(0x0);
119 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
120 ar71xx_eth0_data.phy_mask = 0x01;
122 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
123 ar71xx_eth1_data.phy_mask = 0x10;
125 ar71xx_add_device_eth(0);
126 ar71xx_add_device_eth(1);
128 ar71xx_add_device_m25p80(&wrt160nl_flash_data);
130 ar71xx_add_device_usb();
131 ar913x_add_device_wmac(eeprom, NULL);
133 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
136 ar71xx_add_device_gpio_buttons(-1, WRT160NL_BUTTONS_POLL_INTERVAL,
137 ARRAY_SIZE(wrt160nl_gpio_buttons),
138 wrt160nl_gpio_buttons);
141 MIPS_MACHINE(AR71XX_MACH_WRT160NL, "Linksys WRT160NL", wrt160nl_setup);