setup mac address on the WNR2000
[oweals/openwrt.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-wnr2000.c
1 /*
2  *  NETGEAR WNR2000 board support
3  *
4  *  Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5  *  Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6  *  Copyright (C) 2008-2009 Andy Boyett <agb@openwrt.org>
7  *
8  *  This program is free software; you can redistribute it and/or modify it
9  *  under the terms of the GNU General Public License version 2 as published
10  *  by the Free Software Foundation.
11  */
12
13 #include <linux/platform_device.h>
14 #include <linux/mtd/mtd.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/spi/spi.h>
17 #include <linux/spi/flash.h>
18 #include <linux/input.h>
19
20 #include <asm/mips_machine.h>
21
22 #include <asm/mach-ar71xx/ar71xx.h>
23
24 #include "devices.h"
25
26 #define WNR2000_GPIO_LED_PWR_GREEN      14
27 #define WNR2000_GPIO_LED_PWR_AMBER      7
28 #define WNR2000_GPIO_LED_WPS            4
29 #define WNR2000_GPIO_LED_WLAN           6
30 #define WNR2000_GPIO_BTN_RESET          21
31 #define WNR2000_GPIO_BTN_WPS            8
32
33 #define WNR2000_BUTTONS_POLL_INTERVAL   20
34
35 #ifdef CONFIG_MTD_PARTITIONS
36 static struct mtd_partition wnr2000_partitions[] = {
37         {
38                 .name           = "u-boot",
39                 .offset         = 0,
40                 .size           = 0x040000,
41                 .mask_flags     = MTD_WRITEABLE,
42         } , {
43                 .name           = "u-boot-env",
44                 .offset         = 0x040000,
45                 .size           = 0x010000,
46         } , {
47                 .name           = "rootfs",
48                 .offset         = 0x050000,
49                 .size           = 0x240000,
50         } , {
51                 .name           = "user-config",
52                 .offset         = 0x290000,
53                 .size           = 0x010000,
54         } , {
55                 .name           = "uImage",
56                 .offset         = 0x2a0000,
57                 .size           = 0x120000,
58         } , {
59                 .name           = "language_table",
60                 .offset         = 0x3c0000,
61                 .size           = 0x020000,
62         } , {
63                 .name           = "rootfs_checksum",
64                 .offset         = 0x3e0000,
65                 .size           = 0x010000,
66         } , {
67                 .name           = "art",
68                 .offset         = 0x3f0000,
69                 .size           = 0x010000,
70                 .mask_flags     = MTD_WRITEABLE,
71         }
72 };
73 #endif /* CONFIG_MTD_PARTITIONS */
74
75 static struct flash_platform_data wnr2000_flash_data = {
76 #ifdef CONFIG_MTD_PARTITIONS
77         .parts          = wnr2000_partitions,
78         .nr_parts       = ARRAY_SIZE(wnr2000_partitions),
79 #endif
80 };
81
82 static struct spi_board_info wnr2000_spi_info[] = {
83         {
84                 .bus_num        = 0,
85                 .chip_select    = 0,
86                 .max_speed_hz   = 25000000,
87                 .modalias       = "m25p80",
88                 .platform_data  = &wnr2000_flash_data,
89         }
90 };
91
92 static struct gpio_led wnr2000_leds_gpio[] __initdata = {
93         {
94                 .name           = "wnr2000:green:power",
95                 .gpio           = WNR2000_GPIO_LED_PWR_GREEN,
96                 .active_low     = 1,
97         }, {
98                 .name           = "wnr2000:amber:power",
99                 .gpio           = WNR2000_GPIO_LED_PWR_AMBER,
100                 .active_low     = 1,
101         }, {
102                 .name           = "wnr2000:green:wps",
103                 .gpio           = WNR2000_GPIO_LED_WPS,
104                 .active_low     = 1,
105         }, {
106                 .name           = "wnr2000:blue:wlan",
107                 .gpio           = WNR2000_GPIO_LED_WLAN,
108                 .active_low     = 1,
109         }
110 };
111
112 static struct gpio_button wnr2000_gpio_buttons[] __initdata = {
113         {
114                 .desc           = "reset",
115                 .type           = EV_KEY,
116                 .code           = BTN_0,
117                 .threshold      = 5,
118                 .gpio           = WNR2000_GPIO_BTN_RESET,
119         }, {
120                 .desc           = "wps",
121                 .type           = EV_KEY,
122                 .code           = BTN_1,
123                 .threshold      = 5,
124                 .gpio           = WNR2000_GPIO_BTN_WPS,
125         }
126 };
127
128 static void __init wnr2000_setup(void)
129 {
130         u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
131
132         ar71xx_set_mac_base(mac);
133         ar71xx_add_device_mdio(0x0);
134
135         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
136         ar71xx_eth0_data.phy_mask = 0xf;
137         ar71xx_eth0_data.speed = SPEED_100;
138         ar71xx_eth0_data.duplex = DUPLEX_FULL;
139         ar71xx_eth0_data.has_ar8216 = 1;
140
141         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
142         ar71xx_eth1_data.phy_mask = 0x10;
143
144         ar71xx_add_device_eth(0);
145         ar71xx_add_device_eth(1);
146
147         ar71xx_add_device_spi(NULL, wnr2000_spi_info,
148                                         ARRAY_SIZE(wnr2000_spi_info));
149
150         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wnr2000_leds_gpio),
151                                         wnr2000_leds_gpio);
152
153         ar71xx_add_device_gpio_buttons(-1, WNR2000_BUTTONS_POLL_INTERVAL,
154                                         ARRAY_SIZE(wnr2000_gpio_buttons),
155                                         wnr2000_gpio_buttons);
156
157
158         ar91xx_add_device_wmac();
159 }
160
161 MIPS_MACHINE(AR71XX_MACH_WNR2000, "NETGEAR WNR2000", wnr2000_setup);