2 * Ubiquiti RouterStation support
4 * Copyright (C) 2008-2009 Gabor Juhos <juhosg@openwrt.org>
5 * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
6 * Copyright (C) 2008 Ubiquiti <support@ubnt.com>
8 * This program is free software; you can redistribute it and/or modify it
9 * under the terms of the GNU General Public License version 2 as published
10 * by the Free Software Foundation.
13 #include <asm/mach-ar71xx/ar71xx.h>
17 #include "dev-m25p80.h"
18 #include "dev-ap91-pci.h"
19 #include "dev-gpio-buttons.h"
20 #include "dev-pb42-pci.h"
21 #include "dev-leds-gpio.h"
24 #define UBNT_RS_GPIO_LED_RF 2
25 #define UBNT_RS_GPIO_SW4 8
27 #define UBNT_LS_SR71_GPIO_LED_D25 0
28 #define UBNT_LS_SR71_GPIO_LED_D26 1
29 #define UBNT_LS_SR71_GPIO_LED_D24 2
30 #define UBNT_LS_SR71_GPIO_LED_D23 4
31 #define UBNT_LS_SR71_GPIO_LED_D22 5
32 #define UBNT_LS_SR71_GPIO_LED_D27 6
33 #define UBNT_LS_SR71_GPIO_LED_D28 7
35 #define UBNT_M_GPIO_LED_L1 0
36 #define UBNT_M_GPIO_LED_L2 1
37 #define UBNT_M_GPIO_LED_L3 11
38 #define UBNT_M_GPIO_LED_L4 7
39 #define UBNT_M_GPIO_BTN_RESET 12
41 #define UBNT_BUTTONS_POLL_INTERVAL 20
43 static struct gpio_led ubnt_rs_leds_gpio[] __initdata = {
45 .name = "ubnt:green:rf",
46 .gpio = UBNT_RS_GPIO_LED_RF,
51 static struct gpio_led ubnt_ls_sr71_leds_gpio[] __initdata = {
53 .name = "ubnt:green:d22",
54 .gpio = UBNT_LS_SR71_GPIO_LED_D22,
57 .name = "ubnt:green:d23",
58 .gpio = UBNT_LS_SR71_GPIO_LED_D23,
61 .name = "ubnt:green:d24",
62 .gpio = UBNT_LS_SR71_GPIO_LED_D24,
65 .name = "ubnt:red:d25",
66 .gpio = UBNT_LS_SR71_GPIO_LED_D25,
69 .name = "ubnt:red:d26",
70 .gpio = UBNT_LS_SR71_GPIO_LED_D26,
73 .name = "ubnt:green:d27",
74 .gpio = UBNT_LS_SR71_GPIO_LED_D27,
77 .name = "ubnt:green:d28",
78 .gpio = UBNT_LS_SR71_GPIO_LED_D28,
83 static struct gpio_led ubnt_m_leds_gpio[] __initdata = {
85 .name = "ubnt:red:link1",
86 .gpio = UBNT_M_GPIO_LED_L1,
89 .name = "ubnt:orange:link2",
90 .gpio = UBNT_M_GPIO_LED_L2,
93 .name = "ubnt:green:link3",
94 .gpio = UBNT_M_GPIO_LED_L3,
97 .name = "ubnt:green:link4",
98 .gpio = UBNT_M_GPIO_LED_L4,
103 static struct gpio_button ubnt_gpio_buttons[] __initdata = {
109 .gpio = UBNT_RS_GPIO_SW4,
114 static struct gpio_button ubnt_m_gpio_buttons[] __initdata = {
120 .gpio = UBNT_M_GPIO_BTN_RESET,
125 static void __init ubnt_generic_setup(void)
127 ar71xx_add_device_m25p80(NULL);
129 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
130 ARRAY_SIZE(ubnt_gpio_buttons),
136 #define UBNT_RS_WAN_PHYMASK (1 << 20)
137 #define UBNT_RS_LAN_PHYMASK ((1 << 16) | (1 << 17) | (1 << 18) | (1 << 19))
139 #define UBNT_RSPRO_WAN_PHYMASK (1 << 4)
140 #define UBNT_RSPRO_LAN_PHYMASK ((1 << 0) | (1 << 1) | (1 << 2) | (1 << 3))
142 static void __init ubnt_rs_setup(void)
144 ubnt_generic_setup();
146 ar71xx_add_device_mdio(~(UBNT_RS_WAN_PHYMASK | UBNT_RS_LAN_PHYMASK));
148 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
149 ar71xx_eth0_data.phy_mask = UBNT_RS_WAN_PHYMASK;
151 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
152 ar71xx_eth1_data.phy_mask = UBNT_RS_LAN_PHYMASK;
154 ar71xx_eth1_data.speed = SPEED_100;
155 ar71xx_eth1_data.duplex = DUPLEX_FULL;
157 ar71xx_add_device_eth(0);
158 ar71xx_add_device_eth(1);
160 ar71xx_add_device_usb();
162 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
166 MIPS_MACHINE(AR71XX_MACH_UBNT_RS, "UBNT-RS", "Ubiquiti RouterStation",
169 MIPS_MACHINE(AR71XX_MACH_UBNT_AR71XX, "Ubiquiti AR71xx-based board",
170 "Ubiquiti RouterStation", ubnt_rs_setup);
172 static void __init ubnt_rspro_setup(void)
174 ubnt_generic_setup();
176 ar71xx_add_device_mdio(~(UBNT_RSPRO_WAN_PHYMASK | UBNT_RSPRO_LAN_PHYMASK));
178 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
179 ar71xx_eth0_data.phy_mask = UBNT_RSPRO_WAN_PHYMASK;
181 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
182 ar71xx_eth1_data.phy_mask = UBNT_RSPRO_LAN_PHYMASK;
184 ar71xx_eth1_data.speed = SPEED_1000;
185 ar71xx_eth1_data.duplex = DUPLEX_FULL;
187 ar71xx_add_device_eth(0);
188 ar71xx_add_device_eth(1);
190 ar71xx_add_device_usb();
192 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_rs_leds_gpio),
196 MIPS_MACHINE(AR71XX_MACH_UBNT_RSPRO, "UBNT-RSPRO", "Ubiquiti RouterStation Pro",
199 static void __init ubnt_lsx_setup(void)
201 ubnt_generic_setup();
204 MIPS_MACHINE(AR71XX_MACH_UBNT_LSX, "UBNT-LSX", "Ubiquiti LSX", ubnt_lsx_setup);
206 #define UBNT_LSSR71_PHY_MASK (1 << 1)
208 static void __init ubnt_lssr71_setup(void)
210 ubnt_generic_setup();
212 ar71xx_add_device_mdio(~UBNT_LSSR71_PHY_MASK);
214 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
215 ar71xx_eth0_data.phy_mask = UBNT_LSSR71_PHY_MASK;
217 ar71xx_add_device_eth(0);
219 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_ls_sr71_leds_gpio),
220 ubnt_ls_sr71_leds_gpio);
223 MIPS_MACHINE(AR71XX_MACH_UBNT_LSSR71, "UBNT-LS-SR71", "Ubiquiti LS-SR71",
226 static void __init ubnt_m_setup(void)
228 u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
229 u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
231 ar71xx_set_mac_base(mac);
233 ar71xx_add_device_m25p80(NULL);
235 ar71xx_add_device_mdio(~0);
237 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
238 ar71xx_eth0_data.phy_mask = 0;
239 ar71xx_eth0_data.speed = SPEED_100;
240 ar71xx_eth0_data.duplex = DUPLEX_FULL;
241 ar71xx_eth0_data.fifo_cfg1 = 0x0010ffff;
242 ar71xx_eth0_data.fifo_cfg2 = 0x015500aa;
243 ar71xx_eth0_data.fifo_cfg3 = 0x01f00140;
245 ar71xx_add_device_eth(0);
247 ap91_pci_init(ee, NULL);
249 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ubnt_m_leds_gpio),
252 ar71xx_add_device_gpio_buttons(-1, UBNT_BUTTONS_POLL_INTERVAL,
253 ARRAY_SIZE(ubnt_m_gpio_buttons),
254 ubnt_m_gpio_buttons);
257 static void __init ubnt_rocket_m_setup(void)
260 ar71xx_add_device_usb();
263 MIPS_MACHINE(AR71XX_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M",
265 MIPS_MACHINE(AR71XX_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M",
266 ubnt_rocket_m_setup);
268 /* TODO detect the second ethernet port and use one
269 init function for all Ubiquiti MIMO series products */
270 static void __init ubnt_nano_m_setup(void)
274 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
275 ar71xx_eth1_data.phy_mask = 0;
276 ar71xx_eth1_data.speed = SPEED_1000;
277 ar71xx_eth1_data.duplex = DUPLEX_FULL;
278 ar71xx_eth1_data.fifo_cfg1 = 0x0010ffff;
279 ar71xx_eth1_data.fifo_cfg2 = 0x015500aa;
280 ar71xx_eth1_data.fifo_cfg3 = 0x01f00140;
282 ar71xx_add_device_eth(1);
285 MIPS_MACHINE(AR71XX_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M",