2 * jjPlus JWAP003 board support
6 #include <asm/mach-ar71xx/ar71xx.h>
8 #include <linux/i2c-gpio.h>
9 #include <linux/platform_device.h>
13 #include "dev-m25p80.h"
14 #include "dev-gpio-buttons.h"
15 #include "dev-pb42-pci.h"
18 #define JWAP003_KEYS_POLL_INTERVAL 20 /* msecs */
19 #define JWAP003_KEYS_DEBOUNCE_INTERVAL (3 * JWAP003_KEYS_POLL_INTERVAL)
21 #define JWAP003_GPIO_WPS 11
22 #define JWAP003_GPIO_I2C_SCL 0
23 #define JWAP003_GPIO_I2C_SDA 1
25 static struct gpio_keys_button jwap003_gpio_keys[] __initdata = {
29 .code = KEY_WPS_BUTTON,
30 .debounce_interval = JWAP003_KEYS_DEBOUNCE_INTERVAL,
31 .gpio = JWAP003_GPIO_WPS,
36 static struct i2c_gpio_platform_data jwap003_i2c_gpio_data = {
37 .sda_pin = JWAP003_GPIO_I2C_SDA,
38 .scl_pin = JWAP003_GPIO_I2C_SCL,
41 static struct platform_device jwap003_i2c_gpio_device = {
45 .platform_data = &jwap003_i2c_gpio_data,
49 #define JWAP003_WAN_PHYMASK BIT(0)
50 #define JWAP003_LAN_PHYMASK BIT(4)
52 static void __init jwap003_init(void)
54 ar71xx_add_device_m25p80(NULL);
56 ar71xx_add_device_mdio(0, 0x0);
58 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
59 ar71xx_eth0_data.phy_mask = JWAP003_WAN_PHYMASK;
60 ar71xx_eth0_data.speed = SPEED_100;
61 ar71xx_eth0_data.duplex = DUPLEX_FULL;
62 ar71xx_eth0_data.has_ar8216 = 1;
64 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
65 ar71xx_eth1_data.phy_mask = JWAP003_LAN_PHYMASK;
66 ar71xx_eth1_data.speed = SPEED_100;
67 ar71xx_eth1_data.duplex = DUPLEX_FULL;
69 ar71xx_add_device_eth(0);
70 ar71xx_add_device_eth(1);
72 platform_device_register(&jwap003_i2c_gpio_device);
74 ar71xx_add_device_usb();
76 ar71xx_register_gpio_keys_polled(-1, JWAP003_KEYS_POLL_INTERVAL,
77 ARRAY_SIZE(jwap003_gpio_keys),
83 MIPS_MACHINE(AR71XX_MACH_JWAP003, "JWAP003", "jjPlus JWAP003", jwap003_init);