2 * D-Link DIR-600 rev. A1 board support
4 * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
6 * This program is free software; you can redistribute it and/or modify it
7 * under the terms of the GNU General Public License version 2 as published
8 * by the Free Software Foundation.
11 #include <linux/mtd/mtd.h>
12 #include <linux/mtd/partitions.h>
14 #include <asm/mach-ar71xx/ar71xx.h>
18 #include "dev-m25p80.h"
19 #include "dev-ap91-pci.h"
20 #include "dev-gpio-buttons.h"
21 #include "dev-leds-gpio.h"
23 #define DIR_600_A1_GPIO_LED_WPS 0
24 #define DIR_600_A1_GPIO_LED_POWER_AMBER 1
25 #define DIR_600_A1_GPIO_LED_POWER_GREEN 6
27 #define DIR_600_A1_GPIO_BTN_RESET 8
28 #define DIR_600_A1_GPIO_BTN_WPS 12
30 #define DIR_600_A1_BUTTONS_POLL_INTERVAL 20
32 #ifdef CONFIG_MTD_PARTITIONS
33 static struct mtd_partition dir_600_a1_partitions[] = {
38 .mask_flags = MTD_WRITEABLE,
55 .mask_flags = MTD_WRITEABLE,
60 .mask_flags = MTD_WRITEABLE,
67 #endif /* CONFIG_MTD_PARTITIONS */
69 static struct flash_platform_data dir_600_a1_flash_data = {
70 #ifdef CONFIG_MTD_PARTITIONS
71 .parts = dir_600_a1_partitions,
72 .nr_parts = ARRAY_SIZE(dir_600_a1_partitions),
76 static struct gpio_led dir_600_a1_leds_gpio[] __initdata = {
78 .name = "dir-600-a1:green:power",
79 .gpio = DIR_600_A1_GPIO_LED_POWER_GREEN,
81 .name = "dir-600-a1:amber:power",
82 .gpio = DIR_600_A1_GPIO_LED_POWER_AMBER,
84 .name = "dir-600-a1:blue:wps",
85 .gpio = DIR_600_A1_GPIO_LED_WPS,
90 static struct gpio_button dir_600_a1_gpio_buttons[] __initdata = {
96 .gpio = DIR_600_A1_GPIO_BTN_RESET,
103 .gpio = DIR_600_A1_GPIO_BTN_WPS,
108 static void __init dir_600_a1_setup(void)
110 u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
111 u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
113 ar71xx_set_mac_base(mac);
114 ar71xx_add_device_mdio(0x0);
117 ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
118 ar71xx_eth0_data.phy_mask = 0x0;
119 ar71xx_eth0_data.speed = SPEED_100;
120 ar71xx_eth0_data.duplex = DUPLEX_FULL;
121 ar71xx_eth0_data.fifo_cfg1 = 0x0fff0000;
122 ar71xx_eth0_data.fifo_cfg2 = 0x00001fff;
123 ar71xx_eth0_data.fifo_cfg3 = 0x008001ff;
126 ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
127 ar71xx_eth1_data.phy_mask = 0x0;
128 ar71xx_eth1_data.speed = SPEED_1000;
129 ar71xx_eth1_data.duplex = DUPLEX_FULL;
130 ar71xx_eth1_data.fifo_cfg1 = 0x0fff0000;
131 ar71xx_eth1_data.fifo_cfg2 = 0x00001fff;
132 ar71xx_eth1_data.fifo_cfg3 = 0x008001ff;
134 ar71xx_add_device_eth(1);
135 ar71xx_add_device_eth(0);
137 ar71xx_add_device_m25p80(&dir_600_a1_flash_data);
139 ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(dir_600_a1_leds_gpio),
140 dir_600_a1_leds_gpio);
142 ar71xx_add_device_gpio_buttons(-1, DIR_600_A1_BUTTONS_POLL_INTERVAL,
143 ARRAY_SIZE(dir_600_a1_gpio_buttons),
144 dir_600_a1_gpio_buttons);
146 ap91_pci_init(ee, NULL);
149 MIPS_MACHINE(AR71XX_MACH_DIR_600_A1, "DIR-600-A1", "D-Link DIR-600 rev. A1",