ar71xx: ar913x_wmac device support into a separate file
[librecmc/librecmc.git] / target / linux / ar71xx / files / arch / mips / ar71xx / mach-ap81.c
1 /*
2  *  Atheros AP81 board support
3  *
4  *  Copyright (C) 2009 Gabor Juhos <juhosg@openwrt.org>
5  *  Copyright (C) 2009 Imre Kaloz <kaloz@openwrt.org>
6  *
7  *  This program is free software; you can redistribute it and/or modify it
8  *  under the terms of the GNU General Public License version 2 as published
9  *  by the Free Software Foundation.
10  */
11
12 #include <linux/platform_device.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/partitions.h>
15 #include <linux/input.h>
16
17 #include <asm/mips_machine.h>
18 #include <asm/mach-ar71xx/ar71xx.h>
19
20 #include "devices.h"
21 #include "dev-m25p80.h"
22 #include "dev-ar913x-wmac.h"
23
24 #define AP81_GPIO_LED_STATUS    1
25 #define AP81_GPIO_LED_AOSS      3
26 #define AP81_GPIO_LED_WLAN      6
27 #define AP81_GPIO_LED_POWER     14
28
29 #define AP81_GPIO_BTN_SW4       12
30 #define AP81_GPIO_BTN_SW1       21
31
32 #define AP81_BUTTONS_POLL_INTERVAL      20
33
34 #ifdef CONFIG_MTD_PARTITIONS
35 static struct mtd_partition ap81_partitions[] = {
36         {
37                 .name           = "u-boot",
38                 .offset         = 0,
39                 .size           = 0x040000,
40                 .mask_flags     = MTD_WRITEABLE,
41         } , {
42                 .name           = "u-boot-env",
43                 .offset         = 0x040000,
44                 .size           = 0x010000,
45         } , {
46                 .name           = "rootfs",
47                 .offset         = 0x050000,
48                 .size           = 0x500000,
49         } , {
50                 .name           = "uImage",
51                 .offset         = 0x550000,
52                 .size           = 0x100000,
53         } , {
54                 .name           = "ART",
55                 .offset         = 0x650000,
56                 .size           = 0x1b0000,
57                 .mask_flags     = MTD_WRITEABLE,
58         }
59 };
60 #endif /* CONFIG_MTD_PARTITIONS */
61
62 static struct flash_platform_data ap81_flash_data = {
63 #ifdef CONFIG_MTD_PARTITIONS
64         .parts          = ap81_partitions,
65         .nr_parts       = ARRAY_SIZE(ap81_partitions),
66 #endif
67 };
68
69 static struct gpio_led ap81_leds_gpio[] __initdata = {
70         {
71                 .name           = "ap81:green:status",
72                 .gpio           = AP81_GPIO_LED_STATUS,
73                 .active_low     = 1,
74         }, {
75                 .name           = "ap81:amber:aoss",
76                 .gpio           = AP81_GPIO_LED_AOSS,
77                 .active_low     = 1,
78         }, {
79                 .name           = "ap81:green:wlan",
80                 .gpio           = AP81_GPIO_LED_WLAN,
81                 .active_low     = 1,
82         }, {
83                 .name           = "ap81:green:power",
84                 .gpio           = AP81_GPIO_LED_POWER,
85                 .active_low     = 1,
86         }
87 };
88
89 static struct gpio_button ap81_gpio_buttons[] __initdata = {
90         {
91                 .desc           = "sw1",
92                 .type           = EV_KEY,
93                 .code           = BTN_0,
94                 .threshold      = 5,
95                 .gpio           = AP81_GPIO_BTN_SW1,
96                 .active_low     = 1,
97         } , {
98                 .desc           = "sw4",
99                 .type           = EV_KEY,
100                 .code           = BTN_1,
101                 .threshold      = 5,
102                 .gpio           = AP81_GPIO_BTN_SW4,
103                 .active_low     = 1,
104         }
105 };
106
107 static void __init ap81_setup(void)
108 {
109         u8 *mac = (u8 *) KSEG1ADDR(0x1fff1000);
110
111         ar71xx_set_mac_base(mac);
112         ar71xx_add_device_mdio(0x0);
113
114         ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
115         ar71xx_eth0_data.phy_mask = 0xf;
116         ar71xx_eth0_data.speed = SPEED_100;
117         ar71xx_eth0_data.duplex = DUPLEX_FULL;
118         ar71xx_eth0_data.has_ar8216 = 1;
119
120         ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RMII;
121         ar71xx_eth1_data.phy_mask = 0x10;
122
123         ar71xx_add_device_eth(0);
124         ar71xx_add_device_eth(1);
125
126         ar71xx_add_device_usb();
127
128         ar71xx_add_device_m25p80(&ap81_flash_data);
129
130         ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap81_leds_gpio),
131                                         ap81_leds_gpio);
132
133         ar71xx_add_device_gpio_buttons(-1, AP81_BUTTONS_POLL_INTERVAL,
134                                         ARRAY_SIZE(ap81_gpio_buttons),
135                                         ap81_gpio_buttons);
136
137         ar913x_add_device_wmac();
138 }
139
140 MIPS_MACHINE(AR71XX_MACH_AP81, "Atheros AP81", ap81_setup);