add ar7-2.6 fixes by Stefan Weil
[librecmc/librecmc.git] / target / linux / ar7-2.6 / patches / 100-board_support.patch
1 diff -Nru linux-2.6.19.2/arch/mips/Kconfig linux-ar7/arch/mips/Kconfig
2 --- linux-2.6.19.2/arch/mips/Kconfig    2006-12-12 02:32:53.000000000 +0700
3 +++ linux-ar7/arch/mips/Kconfig 2007-01-29 21:52:21.000000000 +0700
4 @@ -16,6 +16,20 @@
5         prompt "System type"
6         default SGI_IP22
7  
8 +config AR7
9 +       bool "Texas Instruments AR7"
10 +       select BOOT_ELF32
11 +       select DMA_NONCOHERENT
12 +       select HW_HAS_PCI
13 +       select IRQ_CPU
14 +       select SWAP_IO_SPACE
15 +       select SYS_HAS_CPU_MIPS32_R1
16 +       select SYS_HAS_EARLY_PRINTK
17 +       select SYS_SUPPORTS_32BIT_KERNEL
18 +       select SYS_SUPPORTS_LITTLE_ENDIAN
19 +       select NEED_MULTIPLE_NODES
20 +       select GENERIC_GPIO
21 +
22  config MIPS_MTX1
23         bool "4G Systems MTX-1 board"
24         select DMA_NONCOHERENT
25 diff -Nru linux-2.6.19.2/arch/mips/Makefile linux-ar7/arch/mips/Makefile
26 --- linux-2.6.19.2/arch/mips/Makefile   2006-12-12 02:32:53.000000000 +0700
27 +++ linux-ar7/arch/mips/Makefile        2007-01-29 21:52:21.000000000 +0700
28 @@ -158,6 +158,13 @@
29  #
30  
31  #
32 +# Texas Instruments AR7
33 +#
34 +core-$(CONFIG_AR7)             += arch/mips/ar7/
35 +cflags-$(CONFIG_AR7)           += -Iinclude/asm-mips/ar7
36 +load-$(CONFIG_AR7)             += 0xffffffff94100000
37 +
38 +#
39  # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
40  #
41  core-$(CONFIG_MACH_JAZZ)       += arch/mips/jazz/
42 diff -Nru linux-2.6.19.2/arch/mips/kernel/setup.c linux-ar7/arch/mips/kernel/setup.c
43 --- linux-2.6.19.2orig/arch/mips/kernel/setup.c 2006-12-12 02:32:53.000000000 +0700
44 +++ linux-ar7/arch/mips/kernel/setup.c  2007-03-04 22:32:13.000000000 +0700
45 @@ -236,7 +236,7 @@
46   * Initialize the bootmem allocator. It also setup initrd related data
47   * if needed.
48   */
49 -#ifdef CONFIG_SGI_IP27
50 +#ifdef CONFIG_NEED_MULTIPLE_NODES
51  
52  static void __init bootmem_init(void)
53  {
54 @@ -244,7 +244,7 @@
55         finalize_initrd();
56  }
57  
58 -#else  /* !CONFIG_SGI_IP27 */
59 +#else  /* !CONFIG_NEED_MULTIPLE_NODES */
60  
61  static void __init bootmem_init(void)
62  {
63 @@ -349,7 +349,7 @@
64         finalize_initrd();
65  }
66  
67 -#endif /* CONFIG_SGI_IP27 */
68 +#endif /* CONFIG_NEED_MULTIPLE_NODES */
69  
70  /*
71   * arch_mem_init - initialize memory managment subsystem
72 diff -Nru linux-2.6.19.2/arch/mips/kernel/traps.c linux-ar7/arch/mips/kernel/traps.c
73 --- linux-2.6.19.2/arch/mips/kernel/traps.c     2007-01-11 02:10:37.000000000 +0700
74 +++ linux-ar7/arch/mips/kernel/traps.c  2007-03-15 13:19:19.000000000 +0700
75 @@ -1072,11 +1072,6 @@
76  unsigned long exception_handlers[32];
77  unsigned long vi_handlers[64];
78  
79 -/*
80 - * As a side effect of the way this is implemented we're limited
81 - * to interrupt handlers in the address range from
82 - * KSEG0 <= x < KSEG0 + 256mb on the Nevada.  Oh well ...
83 - */
84  void *set_except_vector(int n, void *addr)
85  {
86         unsigned long handler = (unsigned long) addr;
87 @@ -1084,9 +1079,15 @@
88  
89         exception_handlers[n] = handler;
90         if (n == 0 && cpu_has_divec) {
91 -               *(volatile u32 *)(ebase + 0x200) = 0x08000000 |
92 -                                                (0x03ffffff & (handler >> 2));
93 -               flush_icache_range(ebase + 0x200, ebase + 0x204);
94 +               /* lui k0, 0x0000 */
95 +               *(volatile u32 *)(CAC_BASE+0x200) = 0x3c1a0000 | (handler >> 16);
96 +               /* ori k0, 0x0000 */
97 +               *(volatile u32 *)(CAC_BASE+0x204) = 0x375a0000 | (handler & 0xffff);
98 +               /* jr k0 */
99 +               *(volatile u32 *)(CAC_BASE+0x208) = 0x03400008;
100 +               /* nop */
101 +               *(volatile u32 *)(CAC_BASE+0x20C) = 0x00000000;
102 +               flush_icache_range(CAC_BASE+0x200, CAC_BASE+0x210);
103         }
104         return (void *)old_handler;
105  }