ar7: clocks setup (prerequisite for dsl/usb) and misc cleanups.
[librecmc/librecmc.git] / target / linux / ar7-2.6 / files / arch / mips / ar7 / setup.c
1 /*
2  * $Id$
3  * 
4  * Copyright (C) 2006, 2007 OpenWrt.org
5  * 
6  * Carsten Langgaard, carstenl@mips.com
7  * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
8  *
9  *  This program is free software; you can distribute it and/or modify it
10  *  under the terms of the GNU General Public License (Version 2) as
11  *  published by the Free Software Foundation.
12  *
13  *  This program is distributed in the hope it will be useful, but WITHOUT
14  *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
15  *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
16  *  for more details.
17  *
18  *  You should have received a copy of the GNU General Public License along
19  *  with this program; if not, write to the Free Software Foundation, Inc.,
20  *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
21  */
22 #include <linux/init.h>
23 #include <linux/sched.h>
24 #include <linux/ioport.h>
25 #include <linux/pci.h>
26 #include <linux/tty.h>
27 #include <linux/pm.h>
28 #include <linux/serial_8250.h>
29 #include <linux/serial_core.h>
30 #include <linux/serial.h>
31 #include <linux/serial_reg.h>
32
33 #include <asm/cpu.h>
34 #include <asm/irq.h>
35 #include <asm/mips-boards/generic.h>
36 #include <asm/mips-boards/prom.h>
37 #include <asm/dma.h>
38 #include <asm/time.h>
39 #include <asm/traps.h>
40 #include <asm/io.h>
41 #include <asm/reboot.h>
42 #include <asm/gdb-stub.h>
43 #include <asm/ar7/ar7.h>
44
45 extern void ar7_time_init(void);
46 static void ar7_machine_restart(char *command);
47 static void ar7_machine_halt(void);
48 static void ar7_machine_power_off(void);
49
50 static void ar7_machine_restart(char *command)
51 {
52         volatile u32 *softres_reg = (u32 *)ioremap(AR7_REGS_RESET +
53                                                    AR7_RESET_SOFTWARE, 1);
54         prom_printf("Reboot\n");
55         *softres_reg = 1;
56 }
57
58 static void ar7_machine_halt(void)
59 {
60         prom_printf("Halt\n");
61         while (1);
62 }
63
64 static void ar7_machine_power_off(void)
65 {
66         volatile u32 *power_reg = (u32 *)ioremap(AR7_REGS_POWER, 1);
67         u32 power_state = *power_reg | (3 << 30);
68         prom_printf("Power off\n");
69         *power_reg = power_state;
70         ar7_machine_halt();
71 }
72
73 const char *get_system_type(void)
74 {
75         u16 chip_id = ar7_chip_id();
76         switch (chip_id) {
77         case AR7_CHIP_7300:
78                 return "TI AR7 (TNETD7300)";
79         case AR7_CHIP_7100:
80                 return "TI AR7 (TNETD7100)";
81         case AR7_CHIP_7200:
82                 return "TI AR7 (TNETD7200)";
83         default:
84                 return "TI AR7 (Unknown)";
85         }
86 }
87
88 static int __init ar7_init_console(void)
89 {
90         return 0;
91 }
92
93 /*
94  * Initializes basic routines and structures pointers, memory size (as
95  * given by the bios and saves the command line.
96  */
97
98 extern void ar7_init_clocks(void);
99
100 void __init plat_mem_setup(void)
101 {
102         unsigned long io_base;
103
104         _machine_restart = ar7_machine_restart;
105         _machine_halt = ar7_machine_halt;
106         pm_power_off = ar7_machine_power_off;
107         board_time_init = ar7_time_init;
108         panic_timeout = 3;
109
110         io_base = (unsigned long)ioremap(AR7_REGS_BASE, 0x10000);
111         if (!io_base) panic("Can't remap IO base!\n");
112         set_io_port_base(io_base);
113
114         prom_meminit();
115         ar7_init_clocks();
116
117         ioport_resource.start = 0;
118         ioport_resource.end   = ~0;
119         iomem_resource.start  = 0;
120         iomem_resource.end    = ~0;
121 }
122
123 console_initcall(ar7_init_console);