target/linux/apm821xx/dts/netgear-wndap6x0.dtsi

   1 /*
   2  * Device Tree Source for Netgear WNDAP620 and WNDAP660
   3  *
   4  * This file is licensed under the terms of the GNU General Public
   5  * License version 2.  This program is licensed "as is" without
   6  * any warranty of any kind, whether express or implied.
   7  */
   8
   9 #include "apm82181.dtsi"
  10
  11 / {
  12         aliases {
  13                 serial0 = &UART0;
  14                 led-boot = &status;
  15                 led-failsafe = &failsafe;
  16                 led-running = &status;
  17                 led-upgrade = &status;
  18         };
  19
  20         chosen {
  21                 stdout-path = "/plb/opb/serial@ef600300";
  22         };
  23 };
  24
  25 &CRYPTO {
  26         status = "okay";
  27 };
  28
  29 &PKA {
  30         status = "okay";
  31 };
  32
  33 &TRNG {
  34         status = "okay";
  35 };
  36
  37 &EBC0 {
  38         ndfc@1,0 {
  39                 status = "okay";
  40                 /* 32 MiB SLC NAND Flash */
  41                 nand {
  42                         #address-cells = <1>;
  43                         #size-cells = <1>;
  44
  45                         partition@0 {
  46                                 label = "u-boot";
  47                                 reg = <0x00000000 0x00100000>;
  48                                 read-only;
  49                         };
  50
  51                         partition@100000 {
  52                                 label = "u-boot-env";
  53                                 reg = <0x00100000 0x00010000>;
  54                                 read-only;
  55                         };
  56
  57                         partition@110000,0 {
  58                                 label = "firmware";
  59                                 reg = <0x00110000 0x01ac0000>;
  60                         };
  61
  62                         partition@110000,1 {
  63                                 /*
  64                                  * The u-boot bootloader will look at this
  65                                  * offset (0x110000) for an uImage binary.
  66                                  */
  67                                 label = "kernel";
  68                                 reg = <0x00110000 0x003f0000>;
  69                         };
  70
  71                         partition@500000 {
  72                                 label = "ubi";
  73                                 reg = <0x00500000 0x016d0000>;
  74                         };
  75
  76                         partition@1bd0000 {
  77                                 /*
  78                                  * original vendor device-tree - do not use or
  79                                  * overwrite. The original u-boot also supports
  80                                  * the gzipped legacy monolithic/Multi-File Image
  81                                  * format, which is a better choice.
  82                                  */
  83                                 label = "device-tree";
  84                                 reg = <0x01bd0000 0x0010000>;
  85                                 read-only;
  86                         };
  87
  88                         partition@1be0000 {
  89                                 label = "var";
  90                                 reg = <0x01be0000 0x0400000>;
  91                                 read-only;
  92                         };
  93
  94                         partition@1fe0000 {
  95                                 label = "manudata";
  96                                 reg   = <0x01fe0000 0x20000 >;
  97                                 read-only;
  98                         };
  99                 };
 100         };
 101 };
 102
 103 &UART0 {
 104         status = "okay";
 105 };
 106
 107 &GPIO0 {
 108         status = "okay";
 109 };
 110
 111 &EMAC0 {
 112         status = "okay";
 113
 114         fixed-link {
 115                 speed = <1000>;
 116                 full-duplex;
 117                 pause;
 118                 asym-pause;
 119         };
 120
 121         mdio0: mdio {
 122                 #address-cells = <1>;
 123                 #size-cells = <0>;
 124         };
 125 };
 126
 127 &POB0 {
 128         keys {
 129                 compatible = "gpio-keys-polled";
 130                 #address-cells = <1>;
 131                 #size-cells = <0>;
 132                 #interrupt-cells = <2>;
 133                 poll-interval = <60>;   /* 3 * 20 = 60ms */
 134                 autorepeat;
 135
 136                 reset {
 137                         label = "Reset Button";
 138                         gpios = <&GPIO0 16 GPIO_ACTIVE_HIGH>;
 139                         linux,code = <KEY_RESTART>;
 140                         interrupt-parent = <&UIC1>;
 141                         interrupts = <0x15 IRQ_TYPE_EDGE_FALLING>;
 142                 };
 143         };
 144
 145         LEDS: leds {
 146                 compatible = "gpio-leds";
 147
 148                 status: power {
 149                         label = "wndap6x0:green:power";
 150                         gpios = <&GPIO0 18 GPIO_ACTIVE_HIGH>;
 151                 };
 152
 153                 failsafe: test {
 154                         label = "wndap6x0:amber:test";
 155                         gpios = <&GPIO0 17 GPIO_ACTIVE_HIGH>;
 156                         panic-indicator;
 157                 };
 158
 159                 activity {
 160                         label = "wndap6x0:green:activity";
 161                         gpios = <&GPIO0 21 GPIO_ACTIVE_HIGH>;
 162                 };
 163
 164                 wlan2g {
 165                         label = "wndap6x0:green:wlan2g";
 166                         gpios = <&GPIO0 19 GPIO_ACTIVE_HIGH>;
 167                 };
 168
 169                 wlan5g {
 170                         label = "wndap6x0:green:wlan5g";
 171                         gpios = <&GPIO0 20 GPIO_ACTIVE_HIGH>;
 172                 };
 173         };
 174
 175         gpio-export {
 176                 compatible = "gpio-export";
 177
 178                 internal-antenna {
 179                         gpio-export,name = "wndap6x0:internal-antenna";
 180                         gpio-export,output = <1>;
 181                         gpios = <&GPIO0 11 GPIO_ACTIVE_HIGH>;
 182                 };
 183
 184                 external-antenna {
 185                         gpio-export,name = "wndap6x0:external-antenna";
 186                         gpio-export,output = <0>;
 187                         gpios = <&GPIO0 14 GPIO_ACTIVE_HIGH>;
 188                 };
 189
 190                 mains-powered {
 191                         /*
 192                          * Input pin describing what powers the AP
 193                          * 0/Low = PoE
 194                          * 1/High = 12v mains powered
 195                          */
 196                         gpio-export,name = "wndap620:mains-powered";
 197                         gpios = <&GPIO0 3 GPIO_ACTIVE_HIGH>;
 198                 };
 199         };
 200
 201         rtl8367b {
 202                 compatible = "realtek,rtl8367b";
 203                 cpu_port = <5>;
 204                 realtek,extif0 = <1 2 1 1 1 1 1 1 2>;
 205                 mii-bus = <&mdio0>;
 206         };
 207 };
 208
 209 &PCIE0 {
 210         status = "okay";
 211 };
 212
 213 &MSI {
 214         status = "okay";
 215 };
 216
 217 &IIC0 {
 218         status = "okay";
 219
 220         at24@52 {
 221                 compatible = "atmel,24c04";
 222                 reg = <0x52>;
 223                 pagesize = <16>;
 224                 read-only;
 225         };
 226 };
 227